• 대한전자공학회논문지SD
• /
• 제38권2호
• /
• pp.145-153
• /
• 2001

조합회로에 대한 ATPG 알고리듬이 효율적으로 100%의 고장 검출율을 달성할 수 있게 되어 감에 따라서 고장 검출율을 그대로 유지한 상태에서 테스트 패턴을 줄이는 압축 기법의 중요성이 점차로 부각되고 있다. 본 논문에서 제시하는 알고리듬은 고장들간의 독립과 양립 관계에 기초해서, 압축된 테스트 패턴을 위해서는 양립할 수 있는 고장 집합의 크기를 크게 해야 하므로, 고장-패턴 쌍과 고장들간의 독립과 양립 관계를 이용해서 고장-패턴 쌍의 트리 구조를 생성하였다. 이 고장-패턴 트리를 바탕으로 해서 효율적으로 압축된 테스트 패턴을 생성할 수 있었고, ISCAS 85와 ISCAS 89 측정 기준 회로에 대한 결과로 제시된 알고리듬의 우수성을 검증하였다.

• Journal of Construction Engineering and Project Management
• /
• 제3권4호
• /
• pp.5-11
• /
• 2013

Construction industry is overwhelmed by delay and often has suffered cost and time overrun. In this context, Last Planner System (LPS) has been considered as a very useful tool for the management of the construction process. Many previous studies have reported its effectiveness in construction performance. This study aims to evaluate the level of importance of the Last Planner processes in the Vietnam construction industry (VCI), and analyze the existing barriers when implementing these processes in construction management. These barriers were collected based on previous studies from International Group for Lean Construction (IGLC). A survey was carried out through questionnaire. The respondents are been experienced people in construction project management. There are four processes of LPS that were investigated including master schedule, phase schedule, lookahead plan, and weekly work plan. The results showed that master schedule is the most important item when performing a construction project in the VCI. The highest degree of agreement belongs to 'owner - contractor' pair with 77.1% importance indices; whereas the lowest belongs to 'consultants - contractors' pair with 63.8% importance indices. Eventually, three barrier factors were extracted from factor analysis technique with 62.2% of variance explained.

• 식물병연구
• /
• 제21권3호
• /
• pp.180-185
• /
• 2015

In the present work, a pair of primers specific to Tomato yellow leaf curl virus (TYLCV) was designed to allow specific amplification of DNA fragments from any TYLCV isolates using an extensive alignment of the complete genome sequences of TYLCV isolates deposited in the GenBank database. A pair of primers which allows the specific amplification of tomato ${\beta}$-tubulin gene was also analyzed as an internal PCR control. A duplex PCR method with the developed primer sets showed that TYLCV could be directly detected from the leaf crude sap of infected tomato plants. In addition, our developed duplex PCR method could determine PCR errors for TYLCV diagnosis, suggesting that this duplex PCR method with the primer sets is a good tool for specific and sensitive TYLCV diagnosis. The developed duplex PCR method was further verified from tomato samples collected from some farms in Korea, suggesting that this developed PCR method is a simple and reliable tool for rapid and large-scale TYLCV detections in tomato plants.

• Journal of Microbiology and Biotechnology
• /
• 제26권11호
• /
• pp.1972-1982
• /
• 2016

Influenza A virus is a single-stranded RNA virus with a genome of negative polarity. Owing to the antigenic diversity and cross concrete shift, an immense number of novel strains have developed astronomically over the years. The present work deals with the codon utilization partialness among five different influenza A viruses isolated from human hosts. All the subtypes showed the homogeneous pattern of nucleotide utilization with a little variation in their utilization frequencies. A lower bias in codon utilization was observed in all the subtypes as reflected by higher magnitudes of an efficacious number of codons. Dinucleotide analysis showed very low CpG utilization and a high predilection of A/T-ending codons. The H5N1 subtype showed noticeable deviation from the rest. Codon pair context analysis showed remarkable depletion of NNC-GNN and NNT-ANN contexts. The findings alluded towards GC-compositional partialness playing a vital role, which is reflected in the consequential positive correlation between the GC contents at different codon positions. Untangling the codon utilization profile would significantly contribute to identifying novel drug targets that will pacify the search for antivirals against this virus.

• KSII Transactions on Internet and Information Systems (TIIS)
• /
• 제13권6호
• /
• pp.3000-3022
• /
• 2019

Full-duplex (FD) technologies enable wireless nodes to simultaneously transmit and receive signal using the same frequency-band. The FD modes could improve their physical layer throughputs. However, in the wireless ad hoc networks, the FD communications also produce new interference risks. On the one hand, the interference ranges (IRs) of the nodes are enlarged when they work in the FD mode. On the other hand, for each FD pair, the FD communication may cause the potential hidden terminal problems to appear around the both sides. In this paper, to avoid the interference risks, we first model the IR of each node when it works in the FD mode, and then analyze the conditions to be satisfied among the transmission ranges (TRs), carrier-sensing ranges (CSRs), and IRs of the FD pair. Furthermore, in the media access control (MAC) layer, we propose a specific method and protocol for collision avoidance. Based on the modified Omnet++ simulator, we conduct the simulations to validate and evaluate the proposed FD MAC protocol, showing that it can reduce the collisions effectively. When the hidden terminal problem is serious, compared with the existing typical FD MAC protocol, our protocol can increase the system throughput by 80%~90%.

• Bulletin of the Korean Chemical Society
• /
• 제5권4호
• /
• pp.162-167
• /
• 1984

Equilibrium and dynamical behaviors of an n-alkane poymer (decane) in solution have been investigated by a molecuar dynamics simulation method. The polymer is assumed to be a chain of elements $(CH_2)$ interconnected by bonds having a fixed bond length and bond angle, but esch bond of the polymer is allowed to execute hindered internal rotation. The calculation explicitly considers the molecular naturer of solvent by including the intermolecular interactions between slovent-solvent molecules and chain element-solvent molecule. We present the results of calculations on (1) equilibrium properties (the solvent molecule-chain element pair correlation function, chain element-chain element pair correlation function, the mean square end-to-end distance and the mean square radius of gyration of the polymer) and (2) dynamic properties (four different autocorrelation functions, namely, the autocorrelation functions for the end-to-end distance and the radius of gyration, and the velocity autocorrelation functions for the center of mass and the end point of the chain). We found that the physical properties of the polymer chain depends sensitively on temperature. Comparison of the present work with other authors' results is also presented.

• 조명전기설비학회논문지
• /
• 제28권5호
• /
• pp.1-14
• /
• 2014

This study has found out appropriate scopes of correlated color temperature and illuminance value with regard to general diffused lighting and work in the kitchen. It also has presented appropriate photometric quantity control speed for behavioral change with the following results. 1)For general diffused lighting, the appropriate photometric quantity has turned out to be 4,000 to 4,500K in color temperature and illuminance value of 300 to 400lx. And 300lx at 4,500K has proven to be the most comfortable, behavior-appropriate, and preferred pair. 2)As far as appropriate photometric quantity for work is concerned, color temperature of 4,000 to 5,000K and illuminance value of 600 to 800lx are appropriate, while 700lx at 4,500 to 5,000K are the most comfortable, behavior-appropriate, and preferred set. 3)As for appropriate photometric quantity control speed in behavioral change, 3 to 5 seconds has proven the most comfortable, appropriate, and preferred for behavioral change from entry to general areas and 1 to 3 seconds for change from general to work.

• Tribology and Lubricants
• /
• 제1권1호
• /
• pp.46-58
• /
• 1985

피스톤링과 실린더벽 사이의 윤활이 왕복운동을 하며 동하중을 받는 포물선형의 슬라이드 베어링의 유체 윤활로 보고 전개하였다. 싸이클 상의 유막 두께의 변화, 윤활유 운반과 마찰력을 계산하는 과정이 개략적으로 설명되었고, 이들 성능 특성들에 대한 링 높이, 링 앞면 곡률반경과 링의 비대칭의 영향을 고찰하였다. 단독링에 대한 해석결과를 조금 더 복잡한 링 팩에 대해 확대 적용하였다. 링의 부하가 되는 링 주위의 압력들은 실험적으로 또는 가스 흐름 해석으로부터 얻을 수 있는데 본 연구에서는 후자를 택하였다. 링팩에서의 유체 연속 및 윤활유 부족에 따른 수치 해석에 주안점을 두었다.

• Journal of Computational Design and Engineering
• /
• 제3권4호
• /
• pp.398-413
• /
• 2016

This work describes the design and development of a new drying system for a rollover carwash machine with the support of numerical tools. The drying system is composed of a pair of stationary vertical dryers and a moveable horizontal dryer that can adjust itself to the contour of a vehicle. After the definition of the dryers' concept, their performance was assessed individually to check their internal flow pattern and to improve their airflow distribution. These issues are expected to provide feedback on redesign and geometric optimization of the dryers. After redesign of the dryers separately, the behaviour of the complete drying system was studied on actual vehicle models, representative of the shortest and tallest dimensions that can be washed with the existing carwash machine sector. The drying efficiency of the whole system was studied by calculation of shear stress distribution on various surfaces of a given vehicle. The results allowed concluding that the overall drying performance of the design system is very good and assure adequate drying on most vehicles surfaces. The results obtained from numerical studies were then validated with experimental measurements and a good agreement was found between the two. The procedure employed in this work can be applied to support the design and analysis of other mechanical drying systems.

• 한국전산유체공학회:학술대회논문집
• /
• 한국전산유체공학회 2006년도 추계 학술대회논문집
• /
• pp.83-88
• /
• 2006

Natural convection flows in a cubical air-filled cavity that has one pair of opposing faces isothermal at different temperatures, $T_h\;and\;T_c$ respectively, the remaining four faces having a linear variation from $T_c\;to\;T_h$ are numerically simulated by a solution code(PowerCFD) using unstructured cell-centered method. An extension to a previously published work, special attention of this work is paid to three-dimensional flow and thermal characteristics in nature convection according to new orientation at Ra= $1{\times}105$. Comparisons of the average Nusselt number at the cold face are made with benchmark solutions and experimental results found in the literature. It is demonstrated that the average Nusselt number on the cold face has a maximum value around the diamond-type inclination angle of $43.2^{\circ}\;at\;Ra=1{\times}105$. We also report the effect of new orientation on the type of flow and temperature structure in a cubical-cavity.