• 한국신뢰성학회지:신뢰성응용연구
• /
• 제1권2호
• /
• pp.79-93
• /
• 2001

Recently, new aspects of paints such as a beautiful appearance, use of environmentally friendly paints, etc., in addition to the superior performance of paints have been requested for industrial paints including the paints for heavy construction equipment and others. Particularly, the quality of appearance of coating affects the sales of heavy construction equipment. And the necessity for the paints to have a superior weather-proof property without changing the luster or color even after long-time exposure to the open air is emphasized. The change in the surface color and luster of the paint due to the natural environment progresses very slowly, and it takes a long time to verify material properties when developing new paints. In order to improve such methods, weathering tests are performed in many laboratories as a test for accelerating aging of coating, and the lifetime of the products is estimated through evaluation of the weathering (environment-proof) quality of paints. However, not a great deal of research activity has been conducted up to the present time since the interrelationship between the actual results of testing and field data is different for each paint and it takes a long time to study relevant materials. Therefore, introduced in the present study is the estimation of the change in the quality of appearance of coating in the field through the accelerated aging test among the cases of improvement of the quality of appearance of the urethane paint for heavy construction equipment.

• 한국화재소방학회논문지
• /
• 제28권5호
• /
• pp.58-63
• /
• 2014

내화도료는 화재 시 발포를 통해 단열 성능을 향상시켜 철골 구조의 열전달을 저감하기 위해 사용되고 있는데, 만일 표준규격을 만족시키지 못하는 내화도료가 사용된다면 철골 구조의 내화 성능에 문제가 발생할 우려가 있다. 내화도료의 내화 성능은 육안으로는 평가가 어려워 현장을 대상으로 하는 간편하면서도 정확한 평가방법의 개발이 요구되고 있다. 본 연구에서는 X-선 분석법(XRF, XRD)을 이용한 내화도료의 화재안전성 평가 방법에 대한 기초연구를 수행하였다. X-선 분석법을 적용한 결과 실제 화재시험을 통한 내화 성능에 따라 특정 성분이 검출되는 것을 확인하였다. X-선 형광분석(XRF)을 통해 인(P)과 염소(Cl) 원소 성분이 일반도료에 비해 내화도료에 훨씬 많이 함유되어 있는 것을 알 수 있었다. X-선 회절분석(XRD)을 통해 내화도료의 주된 결정성 물질로 확인된 폴리인산 암모늄(ammonium polyphosphate)이 일반도료에는 포함되어 있지 않는 것으로 나타났다. X-선 분석법은 휴대용 XRF와 XRD 분석 장비를 통해 머지않아 현장평가방법으로의 적용이 가능할 것으로 예상된다.

• 해양환경안전학회지
• /
• 제16권4호
• /
• pp.361-367
• /
• 2010

해양구조물 수중부의 해양생물 부착을 방지하는 효과적인 방법으로 방오도료를 사용하고 있다. 트리부틸틴(Tributyltin, TBT) 화합물은 우수한 방오성능을 가져 지금까지 광범위하게 사용해 되어 왔으나, 유해물질 사용금지에 따라 새로운 기술을 적용한 방오도료 개발이 진행되고 있다. 신규 방오도료는 낮은 독성을 가지면서도 우수한 방오성능을 가져야 한다. 본 논문에서는 상용 TBT-free 방오도료 3종(아산화동 함유 자기마모형 도료(Cu SPC AF), 아산화동을 함유하지 않는 자기마모형 도료(Cu-Free SPC AF), Foul-release 실리콘 도료(Foul release AF)의 용출수가 가지는 환경영향성을 조피볼락과 알테미아를 사용하여 평가하였다. 용출수에 대한 급성독성을 조사한 결과 방오도료 용출수의 농도와 생물종의 생존율은 반비례하는 경향을 나타내었으며, 자가마모형 도료가 Foul-release 실리콘 도료보다 상대적으로 높은 급성독성을 가지는 것을 확인할 수 있었다.

• 한국식품영양학회지
• /
• 제32권1호
• /
• pp.41-49
• /
• 2019

Carotene, xanthophyll, carotenoid anthocyan, phycopyrine, chlorophyll, and monascus pigments are used as natural coloring agents since they are more stable to human body than synthetic coloring agents. Among them, monascus pigments are a natural red pigment produced by the Monascus purpureus. For the development of edible paint using natural pigment, Monascus purpureus strain was cultured at a temperature of $35^{\circ}C$ for 15 days on a PDYA plate and liquid medium to produce a red pigment. In addition, a large amount of the red pigment was extracted from Hongkuk Koji in parallel with water extraction and ultrasonic wave extraction. At this time, the yield of ultrasonic extract was 2~4 times higher. Thus, Monascus purpureus strains, etc. were prepared by freeze-drying powder. In conclusion, natural paints made with red pigments have enabled the development of been edible paints that can be used as eco-friendly materials with good viscosity, enhanced spread ability and coloration.

• Journal of the Korean Wood Science and Technology
• /
• 제49권5호
• /
• pp.471-481
• /
• 2021

This study investigated the hygroscopicity and UV deterioration characteristics of 3 domestic and 4 imported woods using natural oil, stain, and varnish paints. In terms of hygroscopicity, it was found that the hygroscopicity of the painted wood was lower than that of the unpainted wood, and that as the number of coatings increased, the hygroscopicity decreased. In terms of anti-absorption, oil-based chemical paints showed higher resistance than water-based paints, and natural oils showed results comparable to oil-based paints. As for the UV deterioration, the amount of color change of the painted wood was lower than that of the unpainted wood, and there was no significant difference according to the number of times of painting. The amount of color change was found to be low in oil-based paints and hardwoods. Through this study, we confirmed effective moisture blocking and small color changes during painting using paints, and it is believed that wood can be protected from internal and external defects through selective and efficient painting based on data for excellent painting performance.

• Journal of Advanced Marine Engineering and Technology
• /
• 제33권3호
• /
• pp.387-394
• /
• 2009

It has been observed that coated steel structures are rapidly deteriorated than designed lifetime due to acid rain caused by air pollution etc.. Therefore improvement of corrosion resistance of anti-corrosive paint is very important in terms of safety and economic point of view. In this study corrosion resistance for five kinds of anti-corrosive paints including acryl, fluorine and epoxy resin series were investigated with electrochemical methods such as corrosion potential, polarization curves, impedance and cyclic voltammogram measurements etc.. There were somewhat good relationships between values measured by electrochemical methods such as corrosion current density obtained by cathodic and anodic polarization curves, value of impedance estimated with AC impedance, and polarization resistance on the cyclic voltammogram, for example, corrosion current density was decreased with increasing of values of impedance and polarization resistance on the cyclic voltammogram. However their relationships between corrosion current density and corrosion potential were not well coincided each other. Consequently it is considered that although a corrosion potential of F101 of fuoric resin series shifted to negative direction than other anti-corrosive paints, its corrosion resistance, indicating on the cathodic and anodic polarization curves, AC impedance curves and cyclic voltammogram, was the most superior to other paints, whereas A100 containing arcylic resin showed a relatively poor corrosion resistance compared to other paints.

• 한국농공학회지
• /
• 제25권2호
• /
• pp.67-75
• /
• 1983

The objectives of this paper were to measure the bond strengths of reinforced concrete in which the steel rods were coated with five different kinds of anticorrosion paints, and to compare their prevention effects in salt water. The paints used in the study were epoxy resin I . II . III, Z.R. P., and silicone resin, which were applied at rates recommended by the manufacturers. The bond strengths were measured on the 7-, 14-, and 28-th days after molding. Corrosion conditions of coated steel plate under fresh water, seawater, 10 % salt water, and 20% salt water, were inspected every month during four months test peoriods, respectively. The results obtained from tests are summarized as follows: 1. Paint-coating may reduce the bond strengths of reinforced concrete. Silicone resin paint showed some 20% reduction in the strength compared to those without the paint. However, the other paints seemed not to significantly affect the strength. 2. Picture analyses showed that epoxy resin I and II significantly prevented corrosion steel plates in seawater. Epoxy resin I and silicone resin coating did not do a good job in corrosion prevention. Z.R. P. paint was found to be moderate as preventive coating paint. 3. Varying soluble salt contents had little effects on the corrosion prevention of tested paints. 4. Epoxy resin I and II were found to be appropriate as a coating material to prevent the corrosion of steel rods in seawater. Z.R.P. may also be used for the purpose.

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2017년도 추계 학술논문 발표대회
• /
• pp.37-38
• /
• 2017

In Infrared rays, which are 50% of sunlight, act as heat rays to heat buildings. Solar heat paint is widely used to protect buildings from sunlight. Solar heat coatings are used to block buildings form sunlight. Solar heat paints are classified as heat-reflective paints and heat-insulating paints according to the differential thermal mechanism. In this study, we study the thermal differential mechanism by analyzing the temperature change of the coated steel plate and the solar reflection spectrum on the surface. In this experiment, exposed steel plate, heat-reflective coated steel plate, heat-insulating coated steel plate, and general paint coated steel plate were used. As a result, when the infrared rays of 780nm ~ 1400nm were irradiated, the heat reflective paint had a temperature lower by 10 degrees than other paints. Analysis of the reflection spectrum of the paint shows that the heat paint is lower in heat than other paints because it has higher reflectance of light and absorbs much of the infrared rays.

• 보존과학회지
• /
• 제33권2호
• /
• pp.85-95
• /
• 2017

유화물감은 안료, 건성유, 첨가제의 혼합으로 만들어진다. 과거 유화 물감에 사용된 안료는 광물성 무기안료가 주를 이루었으나 근래에는 다양한 종류의 합성안료가 개발되면서 제조사마다 조색에 차이를 보인다. 하지만 국내 유화물감 연구는 대부분 내구성 실험에 그치고 있으며, 시판되는 물감의 성분적 특성을 비교한 사례는 확인되지 않는다. 본 연구에서는 다양한 유화물감 중 대표적으로 많이 사용되는 4개 제조사에서 생산된 4개 종류의 물감을 선정하여 재질적 특성을 비교하였다. 그 결과, 체질안료는 C사의 유화물감이 다른 제조사 물감과 차이를 보였으며, 착색안료는 물감의 종류 및 제조사에 따라 다양하게 사용된 것으로 확인된다. 상품명이 동일한 유화물감도 제조사에 따라 안료의 종류와 상대적 배합에 차이를 보이고 있으며, 그에 영향을 받아 색상도 각각 다른 것으로 판단된다. 본 연구결과는 유화물감의 과학적 데이터 축적을 통한 근현대 미술품 분석에 도움을 줄 것으로 생각된다. 또한 유화작품을 대상으로 작가별 물감의 특성, 제작 시기별 물감의 특성 등의 미술사 연구에 과학적 근거로 활용될 수 있을 것으로 생각된다.

• 분석과학
• /
• 제24권3호
• /
• pp.168-172
• /
• 2011

건축물의 철골구조는 $500^{\circ}C$에서 휘어지거나 붕괴의 위험이 있으므로 내화 도료를 시공하여 화재로부터 건축물의 구조적 안전을 확보하여야 한다. 본 연구에서는 이 내화 도료에 대한 특성 연구를 위하여 내화 도료 열 두 제품과 내화성능이 없는 일반 도료 여섯 제품의 비교분석을 수행하였다. 비교 분석 장비로는 온도에 따른 중량 변화를 확인하기 위하여 TGA (Thermogravimetric Analyzer)를 사용하였으며, 열 중량 변화에 따른 가스 성분 변화를 분석하기 위하여 FT-IR를 사용하였다. 내화 도료 12제품에 대한 열 중량 변화는, $800^{\circ}C$까지 중량이 40%이하로 감소하는 것을 확인하였으며, 일반 도료의 경우, 50%부터 40% 내외로 중량 감소는 거의 비슷하거나 일반 도료가 높은 것으로 확인되었다. 하지만 내화 도료 중에서 6번 시료는 $800^{\circ}C$에서도 중량이 20%만 감소되는 것을 확인할 수 있었다. 열분해 가스의 FT-IR 분석에 있어서 내화 도료의 경우에는 완전 연소로 인하여 $CO_2$ 피크가 높은 것으로 확인되었다. 하지만 일반 도료인 경우에는 상대적으로 $CO_2$ 피크가 낮고 가스 상태의 물 피크가 높은 것으로 확인되었다. 즉 내화 유기 도료의 경우에는 일반 유기 도료와 비교한 결과, $250^{\circ}C$까지의 TGA 그래프가 차이나는 것을 확인하였으며, 연소시 스펙트럼의 차이를 확인할 수 있었다. 그리고 내화 무기 도료는 TGA 무게 감소량으로도 특징을 확인할 수 있었다.