• Journal of Korean Society of Occupational and Environmental Hygiene
• /
• v.4 no.2
• /
• pp.137-147
• /
• 1994

This study was designed to identify and quantitate airborne isocyanate simultaneously by HPLC. These samples were collected using 1-(2-pyridyl)piperazine(1-2PP) coated glass fiber filter from polyurethane painting works at 8 wood furniture factories in Kimpo and Inchun. The results obtained were as follows : 1. The most suitable mobile phase condition of simultaneously analyzing isocyanates was 0.01 M ammonium acetate buffer ACN(70/30) adjusted to pH 6.2 from the beginning of the analysis to 20 min and 0.01 M ammonium acetate buffer/ACN(50/50) adjusted to pH 6.2 from 21 min to 40 min using the gradient mode. The peaks of isocyanates were able to obtain within 30 min. 2. The recovery efficiencies for 2,6-TDI, 2,4-TDI, HDI and MDI urea derivates spiked at the target concentration on coated glass fiber tillers were 91.00, 93.42, 91.31 and 94.21 %, respectively. 3. The qualitative analysis of the isocyanates samples from polyurethane spray painting works in wood furnture factories identified Ihree isocyanates, 2,6-TDI, 2,4-TDI and MOI. And their concentration ranges were 0-312.6, 0-56.3 and $0-62.1{\mu}g/m^3$, respectively. A disadvantage of using the colorimetric method for isocyanate analysis is its inability of separating isocyanates. This study identified such three isocyanates as 2,6-TDI, 2,4-TDI and MDI from polyurethane spray painting works in wood furniture factories. These isocyanates were successfully quantitated by HPLC by modifying the mobile phase condition and switching to gradient mode.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2014.02a
• /
• pp.394.2-394.2
• /
• 2014

We fabricated highly transparent and flexible Ti doped In2O3 (TIO)/Ag nanowire(NW)/TIO (TAT) multilayer electrodes by linear facing target sputtering (LFTS) and brush-painting for used as flexible for anode organic solar cells(FOSCs). The characteristics of TAT transparent anode as a function of number of brush-painting cycles was also investigated. At optimized conditions we achieved highly flexible TAT multilayer electrodes with a low sheet resistance of $9.01{\Omega}/square$ and a high diffusive transmittance more than 80% in visible region as well as superior mechanical stability. The effective embedment of the Ag NW network between top and bottom TIO films led to a metallic conductivity, high transparency. Based on FE-SEM HRTEM, and XRD analysis, we can find that the Ag NW network was effectively embedded between top and bottom TIO layers due to good flexibility of Ag NW, the TAT multilayer showed superior flexibility than single TIO layer. Successful operation of FOSCs with high power conversion efficiency of 3.01% indicates that TAT hybrid electrode is a promising alternative to conventional ITO electrode for high performance FOSCs.

• Korean Journal of Construction Engineering and Management
• /
• v.24 no.2
• /
• pp.37-49
• /
• 2023

In this study, we proposed resource allocation methodologies to improve the productivity of steel bridge manufacturing plants based on the constraint theory which is very popular in the area of manufacturing industries. To this end, after defining the painting process as a bottleneck, three resource allocation methodologies were developed: Operation Specific Resource Allocation (OSRA), Product Specific Resource Allocation (PSRA), and General Resource Allocation (GRA). As a result of experiments for performance evaluation using a simulation model of the steel bridge supply chain, GRA showed the best performance in terms of the Number of Work-In-Process (NWIP) and Waiting Time (WT), in particular, as workload itself and its variability were increased, the performance gap with the specific resource allocation became further deepened. On average, GRA reduced NWIP by 36.2% and WT by 34.6% compared to OSRA, and reduced NWIP by 71.0% and WT by 70.4% compared to PSRA. The reduction of NWIP and WT means alleviating the bottleneck of the painting process, which eventually means that the productivity of the steel bridge manufacturing plant has improved.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.37 no.12
• /
• pp.1473-1482
• /
• 2013

A disc-type rotary atomizer affords advantages such as superior paint transfer efficiency, uniformity of paint pattern and particle size, and less consumption of compressed air compared to a spray-gun-type atomizer. Furthermore, it can be applied to all types of painting materials, and it is suitable for large-scale processes such as car painting. The painting quality, which is closely related to the atomizer performance, is determined by the uniformity and droplet size in accordance with the design of the bell disc surface. This study establishes the basics of how to design a surface by modeling the operating bell disc's RPM, diameter, surface angle, and film thickness considering dye characteristics such as the viscosity, density, and surface affinity.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.2
• /
• pp.97-108
• /
• 2016

Thermally sprayed metals or organic coatings is often used in corrosion protection of steel structures. Duplex coating systems of thermally sprayed metal in combination with organic coating are selected as a new generic type of coatings on steel structures under the highly corrosive environments. In this study, three types of corrosion tests were carried out on four types of thermal sprayed specimens with sealing: zinc, zinc-15%aluminum alloy, aluminum and aluminum-5%magnesium alloy, four types of duplex coated specimens; thermally sprayed metals in combination with paint of acrylic urethane, and painted specimens. NORSOK M-501, Wet/dry cyclic seawater tests and outdoor exposure tests of nine types of specimens were conducted. From the corrosion test results, weathering performance of them were presented.

• Journal of Korean Society of Steel Construction
• /
• v.28 no.5
• /
• pp.373-382
• /
• 2016

Painting or thermally sprayed metal coating is often used in corrosion protection of steel structures. In recently, duplex coating system which combines thermally sprayed metals with paint is selected as a new generic type of coatings on steel structures under the highly corrosive environments. In this study, the structural steel specimens were surface treated, thermally sprayed with zinc, zinc-15%aluminum alloy, aluminum and aluminum-5%magnesium alloy, and finally sealing or painted with acrylic urethane. And as a reference specimens, steel specimens were painted with acrylic urethane after surface treatment. Circular defects with 1.0, 3.0 and 5.0 mm in diameters and line defect with 2.0 mm width, which reach the steel substrate were created on all specimens. The specimens were exposed into an environmental testing chamber controlled by the ISO 20340, which is a laboratory cyclic accelerated exposure test condition of spraying/UV/low temperature, for up to 175 days. Based on the corrosion tests, corrosion deterioration from the initial defects were evaluated and weathering performance of the specimens are compared.

• Proceedings of the Korean Society For Composite Materials Conference
• /
• 2001.05a
• /
• pp.97-101
• /
• 2001

Composite materials have been applied widely in interior panels of buildings and transport vehicles. Recently good fire performance and weight reduction are key issues in the fields. In the present study we investigated effects of processing parameters on the performance of honeycomb sandwich panels, especially peel strength of the panel and fire performance. The processing parameters considered were types of matrix resin, resin contents, panel cure conditions, and surface painting process conditions. The results showed that the higher resin content provides the better peel strength. Controled cure steps are also needed to obtain good pee] strength. Paint processing parameters including base putty thickness and paint drying conditions and paint thickness are important to obtain good paint adhesion and good fire performance.

• Journal of the Korean Institute of Landscape Architecture International Edition
• /
• no.1
• /
• pp.202-207
• /
• 2001

Covering an area of about 39 ha, Qingming Shanghe Park is located in the northwest of Kaifeng, formerly the capital of seven dynasties in China. It is intended to serve as a tourist attraction based on a painting 〃Qingming Festival at Riverside〃 by Zhang Zeduan of the Northern song Dynasty, which vividly illustrates a real life on the both sides of the Bian River as well as in the urban area, Kaifeng, in early Spring. The park is a collection of varied buildings such as shops, restaurants, tea-houses, theaters, and hotels in the North song style, with an introduction of the history of Kaifeng, this paper examines design philosophy and methodology of the park, and discusses the creative design of the first stage development known as known as The South Area of the park. Marked by the Rainbow Bridge and the City Gate, the South Area is divided into three parts, the rural, suburban, and urban parts which are organized according to the spatial order showed in the painting. The South Area proves to be very successful because of its amazing sense of history and interesting folk performance. Furthermore, the preliminary 9planning of the second stage development known as The North Area is presented with references to culture, history and customs. The North Area is proposed to include the Old Sports & Games Garden, the Exhibition Garden, and the Hot Spring Garden with an appearance of the imperial gardens in the Northern Song, integrated with participation of old sports and games, display of old science & technology achievements, and enjoyment of hot spring bath.

• Journal of Energy Engineering
• /
• v.14 no.2 s.42
• /
• pp.133-139
• /
• 2005

An activated carbon-photo catalysis hybrid system is proposed for the treatment of VOC produced from paint booth. and its VOC removal performance is experimentally evaluated. Activated carbon tower is designed on the basis of the adsorption characteristics of toluene. Photocatalytic system is designed as the series of $TiO_2/SiO\_2$ fluidized bed reactor and $TiO_2$-coated filters. The present activated carbon-photo catalysis hybrid system shows the VOC removal efficiency within $75\~100\%$ under different VOC species and concentrations.

• Proceedings of the KSME Conference
• /
• 2004.11a
• /
• pp.899-903
• /
• 2004

A limit switch box is used for a indicator of a valve actuator. This device indicates an opening and closing of a valve or throttle in a valve actuator. In ship, equipments are required safe and robust because of a rough environment and a specific condition during a voyage. However, the limit switch box is used in an indoor environment generally. Thus, a new limit switch box must be developed which can be used at an outdoor environment. This study designed the limit switch box. The housing of the limit switch box was made by an aluminium die cast method with surface painting after anodizing or chromate coating. In order to evaluate the endurance of the housing, the endurance tests against salt water have been conducted. Experiment results showed that the proposed device provides a reliable performance against salt water.