Objectives: This study was conducted in order to better understand the conceptual model and Stoffenmanager nano module and apply it to the synthesis and packing processes of nanomaterials. Methods: Site visits were conducted to five nanomaterial production processes. Product and exposure variables were investigated in these workplaces. Hazard banding and exposure classification of the synthesis and packing processes of nanomaterials were conducted using documents and the website of Stoffenmanager Nano. Results: The five sites featured different products, packing tasks, ventilation and local exhaust, and others. The hazards for nano-nickel and copper were classified as E. The hazards for both fumed silica and indium tin oxide were classified as D. The hazard for spherical silica was classified as C. The exposure classes in the synthesis process of nanomaterials ranged from 2 through 4. The exposure classes in the packing process of nanomaterials ranged from 1 through 4. Conclusions: Application of Stoffenmanager nano to the synthesis and packing processes of nanomaterials helped to better understand the control level of the work environment and to suggest appropriate actions. The comparison of each process showed the effect of the production process and handling of solids and ventilation on exposure class.
The accompanying paper, Part 1, has presented the physical modeling and basic numerical analysis results of both the flow-induced and thermally-induced residual stress and birefringence in injection molded center gated disks. The present paper, Part II, has attempted to investigate the effects of various processing conditions of injection/compression molding process on the residual stress and birefringence. The birefringence is significantly affected by injection melt temperature, packing pressure and packing time. Birefringence in the shell layer increases as melt temperature gets lower. The inner peak of birefringence increases with packing time and packing pressure. On the other hand, packing pressure, packing time and mold wall temperature affect the thermally-induced residual stress rather significantly in the shell layer, but insignificantly in the core region. Injection/compression molding has been found to reduce the birefringence in comparison with the conventional injection molding process. In particular, mold closing velocity and initial opening thickness in the compression stage of injection/compression molding process have significant effect on the flow-induced birefringence, but not on tile thermal residual stress and the thermally induced birefringence.
This experiment was carried out to find out the effects of packing methods on shelf-life and hy-giene of breast and thigh meats in chicken. The carcass weights were about 1.6 kg per bird, and chilled by air spray method. The breast and thigh meats were packed by either vacuum or atmosphere packing methods. Samples were analyzed at 1, 4, 8, 12 and 16 wk after quick freezing at -45˚C for 35 min. Regardless of packing method. The thiobarbituric acid(TBA) values of thigh meats after 1 wk of storage were higher than those of breast meats. The TBA values of both treatments were increased as storage period extended. In addition, the TBA values of vacuum packed meats were lower than those of atmosphere packed meats. The VBN(volatile basic nitrogen) values, regardless of packing method, at 1 wk of storage were higher than those of breast meats. The VBN contents of breast and thigh meats after 16 wk of storage increased markedly, but failed to show significant difference between the two packaging methods. Total plate counts of breast and thigh meats were increased gradually as storage period extended, and the total plate count of breast meat was higher than that of thigh meat. The coliform bacteria were not detected until 16 wk after storage.
This study was carried out in order to develop brand and packing design for agricultural products of Dangjin County. Current packing designs such as rice packs, cucumber box, sweet potato box, apple box and kimchi pack were collected from agricultural cooperatives in Dangjin area. For those packing designs, corporate identity(CI) clinic was conducted and the results obtained were as follows: There are varieties of names, colors, fonts, and sizes far the same items, so that consumers could not easily find and understand those CIs of agricultural products in Dangjin County. Among others, those packages are needed CI clinic such as the packages of Dangjin apple(Song-ak Agricultural Cooperative), Dangjin sweet potato(Seok-moon A. C.) and rice(Daehoji A. C., Shinpyeong A. C.). However, the packing design of Hyang-chae-bang Kimchi is evaluated as good design. For CI clinic, it is desirable to develop unique and united brand name and simple design for the packages such as the case of 'Anseong-Matzum' of Anseong City, which is unique and united brand name with simple design enhancing synergy effect for agricultural marketing.
저온$(5^{\circ}C)$에서 가루차를 일반포장, 일반포장+항산화제, 일반포장+방습제처리시 4개월 이후 품질관련 성분인 총질소, 총아미노산, 탄닌, 카페인, 엽록소, 지방산 함량이 상당히 저하되었으며, 일반포장 + 진공처리는 일반포장 저장에 비해 1개월 정도 저장기간의 연장이 가능하였다. 제품의 표면색상은 저온$(5^{\circ}C)$보관시 일반포장에서는 저장 1개월에 a값(녹색)이 -16.43에서 저장 5개월에는 $42\%$정도 감소된 -10.11로 크게 감소되었다. 외관과 내질에 따른 관능평가시 저온$(5^{\circ}C)$저장의 경우 일반포장 내에서 1개월 경과시 89점이었으나 3개월 보관시 78점으로 가루차의 외관과 내질이 크게 열악해졌으며, 일반포장 + 진공의 경우 4개월 보관시 79점으로 일반포장보다 1개월 정도 더 연장보관이 가능하였다. 본 연구에서는 진공포장한 가루차를 $5^{\circ}C$에서 저장한 것이 처리구 중 가장 우수한 결과를 나타내었다.
칼슘 및 왁스 코팅 포장재 처리가 절화백합과 장미의 절화수명 및 품질에 미치는 효과를 연구하였다. 공시재료는 Lilium Oriental hybrid 'Le Reve'와 Rosa hybrida 'Fire King'를 사용하였으며, 25% 칼슘 및 36% 왁스 코팅 포장재 처리구에 포장 후 $5^{\circ}C$와 $20^{\circ}C$ 저장고에 48시간동안 저장하였다. 절화 백합의 'Le Reve' 경우 36% 왁스 코팅 포장재 처리구에 포장 후 $5^{\circ}C$ 저장시 상품의 수명은 대조구에 비해 2일정도 증가되었다. 그러나 절화 장미 'Fire King'의 경우는 절화의 선도유지나 수명에는 효과가 크게 나타나지 않았다. 그러므로 절화 백합의 경우에는 상품의 수확 후 기능성 포장재가 저장성 및 선도유지에 유용함을 알 수 있었다
유동층 연소로에서 압력 요동의 통계적 처리 방법을 이용하여 충전물질의 유동층 거동에 대한 영향을 분석하였다. 실험은 내경이 6.7cm인 유동화 장치에서 수행하였고, 실험변수는 입자크기 및 분포, 유동화가스, 유동층의 aspect ratio(L/D), 충전물 등이다. 충전물질은 스크린 충전물질을 사용하였고, 압력 요동 특성은 차압 전달기로 측정하였다. 측정 압력 요동 특성치는 평균값과 표준편차, power spectral밀도 합수의 주진동수 등이다. 압력요동의 표준 편차는 압력 측정 tap의 반경 방향에 거의 영향을 받지 않았으며, 압력 측정 tap의 축방향에서는 충전물이 없는 경우 가스분산판 약 4.5cm 이상에서는 거의 일정하다. 충전물의 크기가 증가할수록 주진동수는 감소하는 경향이 나타났으며, 충전물의 양이 10% 부근에서 주진동수가 가장 큰 변화값을 나타내었다. 압력 요동의 표준 편차는 유동층 연소로의 거동을 해석하고 유동화 현상을 설명하는데 효과적이며, 압력 요동의 특성들은 충전물질에 많은 영향을 받았다.
본 연구에서는 국내에서 개발되어진 섬유사 필터의 충진밀도와 여과속도가 처리 효율에 미치는 영향에 대한 연구결과를 나타내었다. 0.93 mm의 직경을 가진 폴리아마이드 섬유사가 충진된 직경 40 cm, 높이 2 m의 pilot-scale 규모의 반응기에서 수행되었다. 충진밀도가 섬유사 여과기의 처리효율에 미치는 영향을 살펴보기 위해 여과속도를 325 m/hr로 고정하고 충진밀도를 $70kg/m^3$에서 $100kg/m^3$의 범위에서 운전하였으며, 이와 반대로 여과 속도가 섬유사 여과기의 처리효율에 미치는 영향을 연구하기 위해서 충진밀도를 $70kg/m^3$으로 고정시킨 뒤 여과속도를 65 m/hr에서 400 m/hr의 범위로 운전하였다. 충진밀도가 증가할수록 여과 압력은 기하급수적으로 증가하였다. 탁도 및 SS 제거효율은 $80kg/m^3$까지는 30% 이내의 낮은 제거효율을 나타내었으며, $100kg/m^3$에서도 50% 이하의 낮은 제거효율을 나타내었다. 여과속도에 따른 섬유사 여과기의 여과압력은 여과 속도와 비례적으로 증가하였다. 여과속도가 낮을수록 탁도와 SS의 제거효율도 증가하였으며 65 m/hr에서 73%의 제거 효율을 나타내었다. 전체적으로, 섬유사 여과기를 이용한 입자상 물질의 제거 효율을 개선하기 위해서는 충진 밀도 보다 여과속도를 유입수 특성에 따라 적절히 조절하는 것이 효과적인 것으로 나타났다.
본 연구에서는 고도정수처리를 위하여 모듈 내부와 세라믹 정밀여과막 외부 사이의 공간에 입상 활성탄(GAC)을 충전한 혼성 모듈을 이용하였으며, 정수 원수 중의 자연산 유기물(NOM)과 미세 무기 입자를 대체하기 위해, 휴믹산(humic acid)과 카올린(kaolin) 모사용액을 사용하였다. GAC의 충전율(packing fraction)에 따른 처리효율의 변화를 알아보고자. GAC의 충전율을 $0{\sim}24.05%$로 변화 시켰다. 그 결과, 3시간 운전하는 동안 막오염에 의한 저항($R_f$) 및 투과선속(J)의 변화 곡선은 GAC의 충전율에 관계없이 거의 중첩되었다. 그리고 탁도의 처리효율은 모든 조건에서 99.46% 이상으로 높았으며, $UV_{254}$ 흡광도로 측정한 NOM의 처리효율은 최대 충전율 24.05%에서 제거율은 99.43%로 가장 높게 나타났다. 한편, 충전율 24.05%에서 13시간 동안 운전한 결과, J는 막오염의 증가에 따라 운전 초기 1시간 이내에 급격히 감소하였으며 3시간 운전 후부터는 거의 일정한 투과선속을 나타냈다. 그리고 탁도 및 NOM의 처리효율은 각각 99.52%와 96.63%로 안정적인 높은 처리효율을 보였다.
전통 유과의 저장성을 증진하기 위한 시도의 일환으로써 Al증착필름 질소치환포장(AN포장군), PE필름 함기포장(PE포장군) 및 ${\gamma}-oryzanol$첨가 질소치환포장(ANA포장군)을 적용하여 $60^{\circ}C$에 20일 동안 저장하면서 유과의 품질 변화를 살펴보았다. 과산화물가, 산가 및 공액이중결합지방산 함량의 경우, PE포장군과 AN포장군은 저장일수가 늘어남에 따라 점차 증가하였고, 세 포장군 가운데 ANA포장군이 가장 낮은 값을 나타내었다. 반면, hexanal 함량은 AN포장군이 PE포장군보다 높았고, 색도에 있어서도 AN포장군이 PE포장군보다 황색도, 적색도가 더 높았다. 유과의 색도 결과와 관련이 있는 것으로 보이는 저장 중 수분함량은 AN포장군이 PE포장군보다 약 3배 정도 높았다. 유과의 질소치환포장시 완전탈기할 경우 제품의 변형 또는 파손이 일어났고 형태를 유지할 경우 잔존 산소량이 높게 나타났으며, 저장기간이 늘어남에 따라 포장지내 잔존 산소량이 증가하였다. 따라서 유과의 경우 질소치환포장의 적용은 완전 탈기가 어려워 일반 유탕스낵에 비해 효과가 낮으며, 유과의 저장성 증진을 위해서는 항산화제를 병용하는 것이 바람직할 것으로 사료된다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.