• Journal of the Institute of Electronics and Information Engineers
• /
• v.54 no.8
• /
• pp.3-11
• /
• 2017

Research and development are being conducted to apply low-power Bluetooth (BLE) technology to IoT (Internet of Things) applications. The characteristic of this application environment is that many piconets can operate in the same space. Therefore, interference between homogeneous networks is likely to occur. In the BLE data channel, adaptive frequency hopping (AFH) scheme is used among the 37 frequency channels, and the master and the slave communicate while changing the carrier frequency. If there are multiple BLE piconets in the same space, there is a risk of frequency collision and packet errors will occur. In this paper, we analyze the packet collision probability due to cochannel interference in multiple asynchronous BLE piconet environments. Specifically, we analyzed packet collision probability according to the number of concurrently operating BLE piconets with the ratio of connection interval to connection event length as the main parameters. The analysis result can be used to set connection event related parameters for a desired packet collision probability according to the number of users having BLE devices in a given space.

• Journal of Broadcast Engineering
• /
• v.7 no.1
• /
• pp.55-65
• /
• 2002

Wavelet transform has recently emerged as a promising technique for video processing applications due to its flexibility in representing non-stationary video signals. Motion estimation which uses wavelet transform of octave band division method is applied In many places but if motion estimation error happens in the lowest frequency band. motion estimation error is accumulated by next time strep and there has the Problem that time and the data amount that are cost In calculation at each steps are increased. On the other hand. wavelet packet that achieved the best image quality in a given bit rate from a rate-distortion sense is suggested. But, this method has the disadvantage of time costs on designing wavelet packet. In order to solve this problem we solved this problem by introducing Top_down method. But we did not find the optimum solution in a given butt rate. That image variance can represent image complexity is considered in this paper. In this paper. we propose a fast multiresolution motion estimation scheme based on the adaptive wavelet transform for video compression.

• Proceedings of the Korea Information Processing Society Conference
• /
• 2006.05a
• /
• pp.1147-1150
• /
• 2006

Stream Control Transmission Protocol (SCTP) uses the 32-bit checksum in the common header, by which a corrupted SCTP packet will be regarded as a lost packet and then discarded. This may result in degradation of SCTP's throughput performance over wireless networks. This paper proposes a new chunk checksum scheme for SCTP, in which each data chunk contains its own checksum field and SACK chunk carry corresponding Transmission Sequence Number (TSN) with timestamp for every corruption event. The proposed chunk checksum scheme is introduced with the following three purposes: 1) to distinguish the chunk corruptions from the chunk losses; 2) to avoid the unnecessary halving of the congestion window (cwnd) in the case of chunk corruption; 3) to avoid the unwanted timeouts which can be induced in conventional SCTP in the case that the retransmitted data chunks are corrupted again in wireless networks. Simulation results show that the proposed chunk checksum scheme could improve the SCTP throughput in the wireless environments with a high bit error rate.

• Proceedings of the Korea Electromagnetic Engineering Society Conference
• /
• 2001.11a
• /
• pp.63-67
• /
• 2001

본 논문에서는 블루투스 Scattenet 환경에서 임펄스 잡음의 영향을 분석하였다. 임펄스 잡음은 Middleton의 A급 임펄스 환경을 가정하였고, Scatternet에 의한 동일채널 간섭과 라이시안 페이딩을 고려하였다. 임펄스 잡음이 존재하는 블루투스 Scatternet에서 PER (Packet Error Rate)과 ARQ 기법을 적용한 처리율 (Throghput) 향상을 임펄스 파라미터 A와 I'에 따라서 알아 보았다. 시뮬레이션 결과 임펄스 파라미터 A와 I'에 따라 PER 성능에 미치는 영향이 큰 것을 알 수 있었고 SAW-ARQ 방법을 사용하여 성능이 향상됨을 알 수 있었다.

• The KIPS Transactions:PartC
• /
• v.9C no.4
• /
• pp.563-572
• /
• 2002

Wireless mobile networks tend to drop a large portion of packets due to propagation errors rather than congestion. To Improve reliability over noisy wireless channels, wireless networks can employ forward error correction (FEC) techniques. Static FEC algorithms, however, can degrade the performance by poorly matching their overhead to the degree of the underlying channel error, especially when the channel path loss rate fluctuates widely. This paper investigates the benefits of an adaptable FEC mechanism for wireless networks with severe packet loss by analytical analysis or measurements over a real wireless network called sensor network. We show that our adaptive FEC named FECA (FEC-level Adaptation) technique improves the performance by dynamically tuning FEC strength to the current amount of wireless channel loss. We quantify these benefits through a hybrid simulation integrating packet-level simulation with bit-level details and validate that FECA keeps selecting the appropriate FEC-level for a constantly changing wireless channel.

• Journal of Information Processing Systems
• /
• v.14 no.6
• /
• pp.1347-1360
• /
• 2018

Owing to limited energy in wireless devices power saving is very critical to prolong the lifetime of the networks. In this regard, we designed a cross-layer optimization mechanism based on power control in which source node broadcasts a Route Request Packet (RREQ) containing information such as node id, image size, end to end bit error rate (BER) and residual battery energy to its neighbor nodes to initiate a multimedia session. Each intermediate node appends its remaining battery energy, link gain, node id and average noise power to the RREQ packet. Upon receiving the RREQ packets, the sink node finds node disjoint paths and calculates the optimal power vectors for each disjoint path using cross layer optimization algorithm. Sink based cross-layer maximal minimal residual energy (MMRE) algorithm finds the number of image packets that can be sent on each path and sends the Route Reply Packet (RREP) to the source on each disjoint path which contains the information such as optimal power vector, remaining battery energy vector and number of packets that can be sent on the path by the source. Simulation results indicate that considerable energy saving can be accomplished with the proposed cross layer power control algorithm.

• Journal of the Institute of Electronics Engineers of Korea SP
• /
• v.41 no.5
• /
• pp.203-216
• /
• 2004

Recent advances in video coding technology have resulted in rapid growth of application in mobile communication, With this explosive growth reliable transmission and error resilient technique become increasingly necessary to offer high quality multimedia service. In this paper, we present the result of our investigation on the error resilient performance evaluation of the MPEG-4 simple profile under the H.324/M and the H.264/AVC baseline under the IP packet networks. Especially, we have tested error resilient tools of MPEG-4 simple profile such as resynchronization marker insertion, data partitioning, and of H.264/AVC baseline such as the flexible macroblock ordering (FMO) scheme. The objective quality of decoded video is measured in terms of rate and PSNR under various random bit and burst error conditions.

• Publications of The Korean Astronomical Society
• /
• v.29 no.3
• /
• pp.45-52
• /
• 2014

This paper describes the development of algorithm for direct data transmission between Raw VLBI Data Buffer (RVDB) and Huge Capacity Data Server (HCDS) operated in Korea-Japan Correlation Center (KJCC). The transmitted data is the VLBI observation data, which is recorded at each radio telescope site, and the data transmitting rate is varying from 1 Gbps, in usual case, upto 8 Gbps. The developed algorithm for data transmission enables the direct data transmission between RVDB and HCDS through 10 Gbps optical network using VLBI Data Interchange Format (VDIF). Proposed method adopts the conventional UDP/IP protocol, but in order to prevent the loss of data during data transmission, the packet error monitoring and data re-transmission functions are newly designed. The VDIF specification and VDIFCP (VDIF Control Protocol) are used for the direct data transmission between RVDB and HCDS. To validate the developed algorithm for data transmission, we conducted the data transmission from RVDB to HCDS, and compared to the transmitted data with the original data bit by bit. We confirmed that the transmitted data is identical to the original data without any loss and it has been recovered well even if there were some packet losses.

• ETRI Journal
• /
• v.32 no.2
• /
• pp.273-280
• /
• 2010

The overall channel capacity of a multihop wireless path drops progressively over each hop due to the cascading effect of noise and interference. Hence, without optimal rate adaptation, the video quality is expected to degrade significantly at any client located at a far-edge of an ad-hoc network. To overcome this limitation, decoding and forwarding (DF), which fully decodes codewords at each intermediate node, can be employed to provide the best video quality. However, complexity and memory usage for DF are significantly high. Consequently, we propose syndrome-based partial decoding (SPD). In the SPD framework an intermediate node partially decodes a codeword and relays the packet along with its syndromes if the packet is corrupted. We demonstrate the efficacy of the proposed scheme by simulations using actual 802.11b wireless traces. The trace-driven simulations show that the proposed SPD framework, which reduces the overall processing requirements of intermediate nodes, provides reasonably high goodput when compared to simple forwarding and less complexity and memory requirements when compared to DF.

• Journal of Advanced Navigation Technology
• /
• v.14 no.2
• /
• pp.198-205
• /
• 2010

Any user in Ubiquitous environments have to be able to access networks in anywhere and anytime. Thus interests and researches are increasing. In this paper, we propose an interface selection scheme that adaptively utilizes a proper interface, as the wireless channel condition changes, instead of utilizing only one interface while the node is in move. The proposed scheme can determine which interface would be the most proper one by measuring data rate, packet error rate (PER), and end-to-end delay of each interface. From the simulation results, it is verified that the proposed scheme is able to enhance packet transmission about 20% better.