• 지질공학
• /
• 제8권2호
• /
• pp.189-203
• /
• 1998

상업용 Packer를 이용하여 시추공내에서 암반의 변형율 측정 할 수 있는 Dilatometer방법을 개발하였다. 직경 0.5인치, AX, BX, NX 및 HX크기의 시추 공에서 사용 할 수 있는Packer-dilatometer를 개발하여 현장에서 암반 변형율을 측정하였다. 본 방법은 Packer에 의하여 시추 공 벽에 압력을 가하여 이때 발생된 암반의 변형을 Packer에 주입된 주입수의 양으로 측정하는 방법이다. 본 논문에서는 이방법의 이론적 해석, 장비, 시험방법 및 순서, Calibration 정수 산정을 위한 장비 및 방법, Contact pressure의 측정 및 이를 이용한 현장조사 결과에 대한 연구 내용을 기술 하였다.

• 대한기계학회논문집A
• /
• 제32권10호
• /
• pp.897-904
• /
• 2008

Egg grading machine is used in poultry raising industry to classify eggs by their weight and to pack up them. Packer holder mechanism is a main part of the egg grading machine, of which role is to take eggs fallen from conveyor belt, and afterward to transfer eggs vertically to mold tray. The vertical motion of packer holder is usually driven by slider-crank mechanism or cam. This paper describes development of the cam in packer holder based on kinematic analysis of packer holder mechanism and measurement of acceleration and noise of the cam to verify performance of it. Several cams that are designed and manufactured by the author of this paper according to different design specification are compared to determine the best solution for egg transfer in the packer holder mechanism.

• 한국정밀공학회지
• /
• 제25권2호
• /
• pp.96-104
• /
• 2008

An egg grading machine is composed of many mechanisms of which functions are to carry eggs to the bucket in that sensors are located to categorize eggs by their weight, to transfer eggs from the basket of packer holder to the mold tray, to feed the mold tray dispenser after egg chairs are filled with eggs. This paper deals with the analysis and new design of packer holder mechanism of which function is transfer eggs vertically from the bucket conveyor to the mold tray dispenser. Egg is fragile to impact so in designing packer holder mechanism it is necessary to estimate moving speed, acceleration and impact when eggs are touched by any links of mechanism and mold tray dispenser. A new packer holder mechanism is proposed in this paper, which use quick return mechanism composed of 6 links with pin and contact joints.

• 한국정밀공학회:학술대회논문집
• /
• 한국정밀공학회 1997년도 추계학술대회 논문집
• /
• pp.576-579
• /
• 1997

In order to repair sewage pipes, it is necessary to dig up the damaged sewage pipes, which results in traffic jams. Since digging up the pipes takes too much time and cost, this method is inefficient. So, in stead of digging up the damaged pipes, a robot is sent down to the pipe to do the repair works. For big pipes, human workers go into the pipe and do to repair works, but for small pipes, it is impossible for human worker to go inside the pipe. In this case, mobile robots have used. The procedures for repairing pipes are as follows : First, the condition of the sewage pipes is observed by a robot. Second, appropriate steps for repair are determined according to the types of the damage. While repairing procedures, a newly-developed packer is sent into the sport to be repaired inside the pipe. Then, the packer is filled with air by a V-shaped wrinkel pipe. This makes the packer inflates uniformly and adhere closely to the inside wall of the pipe in large area. This increases the area that can be repaired. Therefore, the newly-developed packer will be very helpful for sewage pipe repair works.

• 한국축산식품학회지
• /
• 제18권2호
• /
• pp.115-124
• /
• 1998

This study was carried out investigate hygienic conditions of domestic packing plant for export and the shelf-life by Japanese standards. vacuum packaged chilled port loins provided by five packers(A, B, C, D and E) were transported to Japan in the same condition, Four packers(A, B, C adn d) produced the samples as hygienic as possible and one packer produced loins in the traditional hygienic condition, In TTC(2,3,5-triphenyl tetrazolium chloride) test all samples showed the negative reaction from the date of the quarantine(14 days after slaughtering) to 50 days The numbers of total plate count(TPC) of A, B, C and D packers that were below 108CFU/g until 50 days were accepted by Japanese Standards but TPC of E packer was over 107CFU/g at 30 days. VBN values increased sig-nificantly(P<0.01) in samples of A,B and D packers in the samples of C packer and E packer at 5% and 0.1% level respectively. The pH values of the vacuum packaged chilled pork for export at 14 days after slaughtering were 5.43∼6.00 In sensory evaluation, A, B, C and D packers which improved hygi-enic condition produced the products with good color and appearance. low drip until 40 days storage at $0^{\circ}C$ But as the storage time increase off-flavor occured at 40days in A and D packer and at 50days in B and C packer. In conclusion according to the above results of microbiological physicochemical and sensory evalution the edible periods of Korean vacuum package chilled porks may be estimated to 40∼50 days for the packers who improved hygienic condition and the shelf lives were calculated as 32∼40 days from edible period by a factor of 0.8(safety coefficient) while that of the pork from E packer which was produced in the traditional hygienic condition was estimated to 30 days after slaughtering at $0^{\circ}C$ Therefore the shelf-life of the pork of E packer would be only 24 days.

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2003년도 봄 학술발표회 논문집
• /
• pp.671-680
• /
• 2003

The accuracy of inflow into tunnel estimates depends largely on how well permeability is characterized. But, the average of the packer test results will always underestimate the upper end of the permeability range, and therefore underestimate the inflow. Taking an average of the test results always underestimates inflow because the average permeability does not really exist. The distribution of packer-test data may not accurately reflect permeability, however, due to the limits of the test method and the luck of the field investigation. These discrepancies may be overcome by using Raymer(2001)'s log-normal plots and Heuer(1995)'s histograms of the data to develop a permeability model that will be used in lieu of the data to calculate inflow. Furthermore, the influence on the inflow is examined by the geological characteristics based upon the hundred times of packer test OO tunnel project.

• 지질공학
• /
• 제25권2호
• /
• pp.179-188
• /
• 2015

Although permeating injection is ideal for grouting reservoir embankments, it is usually combined with fracturing injection for grouting, which can disturb the original soil. Compaction with low expansive pressure followed by grout injection can overcome this problem. An expansive compaction (EC) packer was developed in this work to easily apply sequential injection and compaction at a work site. Furthermore, to achieve compaction around the grouting hole, a mixture of expansive admixtures and grout was injected with the EC packer to trigger an increase in volume of the grout material. This work verifies the compaction effect of the EC packer and the expansive admixture. It reports the concepts of the EC packer, the range of expansive compaction, the effectiveness of injection, and the results of indoor tests performed to verify the effectiveness of the expansive admixtures. The indoor testing comprised a preparatory test and the main test. The preparatory test assessed the admixtures for their compaction effects, while the main test measured and analyzed the admixtures' expansive force, pressure, and compaction effect with a mold to verify the effectiveness of the compaction effect.

• 한국정보과학회:학술대회논문집
• /
• 한국정보과학회 2010년도 한국컴퓨터종합학술대회논문집 Vol.37 No.1(D)
• /
• pp.56-60
• /
• 2010

악성코드의 기능들이 날로 정교해 지면서 악성 행위를 숨기거나 악성코드 분석이 어렵도록 만들기 위한 기법들이 적용되는 것을 쉽게 볼 수 있다. 이 중 악성코드 분석을 어렵게 만드는 대표적인 방식이 Packing이다. 그러므로 악성코드의 분석을 위해 Packing된 악성코드가 어떤 Packer로 Packing되어 있는 지 확인할 필요가 있다. 그러나 현재 사용하는 대부분의 시그니처 기반 탐지 방식은 오탐율 및 미탐율이 높다. 본 논문에서는 Packer 탐지를 위한 새로운 시그니처 생성 방식을 제안하고 성능을 검증한다.

• 제어로봇시스템학회:학술대회논문집
• /
• 제어로봇시스템학회 1987년도 한국자동제어학술회의논문집; 한국과학기술대학, 충남; 16-17 Oct. 1987
• /
• pp.335-339
• /
• 1987

In this report, automatic packing equipment for dairy milk is presented. For food industry, Pneumatic System is widely applied because of it's environments. So, for the actuation, signal processing and sensing of this auto-packer, all pneumatic equipments was applied.

• 지질공학
• /
• 제32권4호
• /
• pp.725-733
• /
• 2022

본 연구에서는 기존 패커를 개량한 하이브리드패커를 장착한 수압암반절개시스템을 벤치컷 공법에 적용하였다. 하이브리드패커는 주입압을 이용하여 수압파쇄균열을 생성시키고 고무패커를 팽창시켜 수압파쇄균열을 확장하고 연장시키는 두 가지 기능을 하나의 패커에 접목시킨 패커시스템으로, 무소음·무진동 수압암반절개에 효율적으로 적용할 수 있도록 설계되었다. 본 연구에서는 벤치컷 굴착을 위해 사면 최상단에 설치된 실험공과 자유면으로부터의 이격거리와 주입설정 등 실험조건을 조정하면서 현장실험을 수행하여 주입 조건에 따른 암반 굴착 효율성을 비교하였다. 5 m의 이격거리를 지닌 조건에서는 굴착이 이루어지지 않은 부분이 발생하였으나 1 m의 이격거리에서는 굴착되지 않은 부분이 발생하지 않았다. 주입압에 의해 생성된 수압파쇄균열은 대체적으로 자유면과 평행하게 발달하여 고무팽창에 의해 확장 및 연장되어 벤치컷 굴착이 용이하게 이루어졌다. 벤치컷 암반 굴착에 수압암반절개공법을 체계적으로 적용하기 위해서는 다양한 암반 상태에 대하여 실험조건을 변화하면서 현장실험 결과를 축적하여야 할 것으로 판단된다.