• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2001년도 토목섬유기술위원회 학술세미나 논문집
• /
• pp.33-44
• /
• 2001

The generally known vertical drain methods for improvement of soft ground are Sand Drain, Sand Compaction Pile, Plastic Drain Board, and Pack Drain. Recently, Plastic Drain Board method application in soft ground is widely used. In this case study, it is compared with each other vertical drain methods from the results of monitorning and test embankment. The results of the analysis and the study show that Plastic Drain Board method is relatively acceptable as vertical drain method.

• Tribology and Lubricants
• /
• 제1권1호
• /
• pp.46-58
• /
• 1985

피스톤링과 실린더벽 사이의 윤활이 왕복운동을 하며 동하중을 받는 포물선형의 슬라이드 베어링의 유체 윤활로 보고 전개하였다. 싸이클 상의 유막 두께의 변화, 윤활유 운반과 마찰력을 계산하는 과정이 개략적으로 설명되었고, 이들 성능 특성들에 대한 링 높이, 링 앞면 곡률반경과 링의 비대칭의 영향을 고찰하였다. 단독링에 대한 해석결과를 조금 더 복잡한 링 팩에 대해 확대 적용하였다. 링의 부하가 되는 링 주위의 압력들은 실험적으로 또는 가스 흐름 해석으로부터 얻을 수 있는데 본 연구에서는 후자를 택하였다. 링팩에서의 유체 연속 및 윤활유 부족에 따른 수치 해석에 주안점을 두었다.

• 대한지역사회영양학회지
• /
• 제4권2호
• /
• pp.149-156
• /
• 1999

This study was due to investigate the dietary intakes, serum lipids and other hematological indices in female adolescent smokers. The subjects were 85 smokers, whose average pack-year(smoking years on the basis of one pack of cigarettes per day) was 1.26 and 87 nonsmokers who were female high school students in Seoul. An anthropometric measreument was performed and % body fat was also analyzed by the Bioelectrical Impedance Fatness Analyzer(GIF-891). Dietary intakes and food habits were examined through questionnaires and nutrient intakes were analyzed by the Computer Aided. Nutritional analysis program for professional(CAN-pro). Serum TG, HDL-cholesterol and total-cholesterol levels were measured with test kits. Serum glucose, albumin, GOT and GPT were measured by automated dry chemistry system, SPOTCHEM 4410. Hemoglobin, hematocrit, RBC, WBC and MCV were determined by Semi Automated Microcell Counter(F-520). All data were statistically analyzed by SAS PC package program. There was no significant difference in the anthropometric measurements between smokers and nonsmokers. The caloric intake in adolescent smokers tended to be higher than that of nonsmokers but the difference was not statistically significant. In addition, there was no significant difference between smokers and nonsmokers in biochemical indices. Analysis of serum lipids showed that the serum levels of total-cholesterol and LDL-cholesterol of nonsmokers were unexpectedly significantly higher(p<0.05) than those of smokers. Overall results indicate that smoking itself with short pack-year in healthy female adolescent did not seem to influence apparent health and nutritional status.

• Journal of Microbiology and Biotechnology
• /
• 제19권10호
• /
• pp.1230-1237
• /
• 2009

The selective plugging strategy of Microbial Enhanced Oil Recovery (MEOR) involves the use of microbes that grow and produce exopolymeric substances, which block the high permeability zones of an oil reservoir, thus allowing the water to flow through the low permeability zones leading to increase in oil recovery. Bacillus licheniformis TT33, a hot water spring isolate, is facultatively anaerobic, halotolerant, and thermotolerant. It produces EPS as well as biosurfactant and has a biofilm-forming ability. The viscosity of its cell-free supernatant is $120\;mPa{\cdot}s$ at $28^{\circ}C$. Its purified EPS contained 26% carbohydrate and 3% protein. Its biosurfactant reduced the surface tension of water from 72 to 34 mN/m. This strain gave $27.7{\pm}3.5%$ oil recovery in a sand pack column. Environmental scanning electron microscopy analysis showed bacterial growth and biofilm formation in the sand pack. Biochemical tests and Amplified Ribosomal DNA Restriction Analysis confirmed that the oil recovery obtained in the sand pack column was due to Bacillus licheniformis TT33.

• 한국군사과학기술학회지
• /
• 제25권6호
• /
• pp.553-560
• /
• 2022

This study investigates improvement of torsional strength of special wrench for K-series self-propelled howitzer power-pack maintenance. In order to maintain the power-pack, special wrench is one of the essential tools for assembling/disassemblimg the engine and transmission. However, failures(plastic deformation, fracture phenomenon and etc.) have been frequently reported even though special wrench was used within recommended standard torque range. Therefore, in this study, finite element analysis using ABAQUS was performed and modification of design parameters have been proposed. Prototypes based on the proposed parameters were manufactured and torsional experiment(torque about 130 % of recommend maximum torque) validated the newly proposed design parameters. Special wrench based on this study is applied to mass production and currently used for the maintenance.

• 대한물리치료과학회지
• /
• 제18권2호
• /
• pp.29-40
• /
• 2011

Purpose: The purpose of this study was to analyze the changes of parameters of foot contact by various carrying a pack methods during walking. Method: The subjects were consisted of normal forty four persons (males 30, females 14, mean age 23). The carrying a pack methods were classified into five conditions: carrying no bag(Con 1), carrying a backpack(Con 2), carrying a shoulder bag(Con 3), carrying a cross bag(Con 4), carrying a one-hand bag(Con 5). All subjects were participated in these five condition and measured foot pressure by F-scan system during walking. Then foot contact time, foot contact area, foot contact length and width were measured and analyzed. The repeated one-way analysis of variance (ANOVA) was used to get difference between conditions and independent t-test was used to get difference between left and right foot within condition. Result: In the comparison of parameters of foot, contact time, contact area and mid foot width were significantly different between conditions(p<.05), and in both foot contact time at condition 5 showed the most significant reduction(p<.05). In the comparison of parameters of foot between left and right foot within condition, every conditions were not significantly different(p>.05). Conclusion: In this study various carrying methods changed the parameters of foot contact and showed significant difference in some articles between carrying methods. However, asymmetric load of pack by carrying methods didn't affected symmetry of parameters of foot contact between left and right foot.

• 대한기계학회논문집B
• /
• 제41권10호
• /
• pp.693-698
• /
• 2017

원통형 리튬이온 배터리를 이용한 배터리 팩의 냉각을 위한 해석을 수행하였다. 파우치형에 비해서 원통형 셀을 이용한 배터리 팩은 저렴하면서 신뢰도가 우수한 것으로 알려져 있다. 단지 부피가 파우치 타입에 비해서 크고 디자인적으로 제약이 있다라는 단점을 가지고 있다. 본 논문에서는 18650 배터리를 이용한 배터리팩의 냉각성능을 해석을 통하여 예측하였다. 배터리팩의 온도 안정성은 자동차용 배터리 팩에서 가장 중요한 부분이기 때문이다. 해석을 수행하기 전에 발열 시험을 수행하였으며 열화상 카메라를 이용하여 온도를 측정하고 해석을 통해서 이에 해당하는 발열량 값을 예측하였다. 이를 바탕으로 배터리 팩의 자연대류와 강제대류 해석을 진행하였으며 각각의 냉각 성능을 비교하였다. 배터리 셀을 직접 냉각하는 직접냉각 방식, 배터리 케이스 상하면을 냉각하는 방식, 배터리 케이스 상하면에 공기 통로를 설치하는 세 가지 방식에 대해서 냉각 성능을 비교하였고, 공기채널 방식이 안정성과 냉각성능 면에서 우수함을 해석을 통하여 입증하였다.

• 한국산학기술학회논문지
• /
• 제18권4호
• /
• pp.527-535
• /
• 2017

연료전지 배터리 하이브리드 UPS용 연료전지 파워 팩 내부에 설치한 연료전지의 화학반응에 의해 생성되는 열을 제거하는데 어려움이 있다. 열을 제거하지 못할 경우 연료전지의 내구성과 성능에 영향을 끼쳐 수명 단축의 원인이 된다. UPS용 연료전지 파워 팩 제작을 위하여 연료전지의 적절한 냉각 방법을 선정하고 제시하는 것이 본 연구의 목표이다. 냉각방법 선정을 위해 냉각 성능에 영향을 주는 각각의 설계 인자를 변화시키면서 연구를 수행하였다. 전산해석은 상용프로그램인 COMSOL Multiphysics로 수행하였다. 먼저 연료전지 스택의 냉각 팬의 위치를 상단과 하단에 배치했을 때 1 kW급 연료전지 스택 표면온도를 비교하였으며, 각각의 위치에 따른 냉각 팬의 회전속도를 2,500, 3,000, 3,500, 4,000 RPM으로 변경하여 적절한 냉각 팬의 속도를 결정하였다. 또한 파워 팩 외부에서 내부로 들어오는 공기의 입구인 그릴의 타공면적을 달리하여 내부로 들어오는 공기의 유량이 냉각에 미치는 영향을 비교하였다. 본 연구는 UPS용 연료전지 파워 팩 내부 연료전지의 열관리 기술개발에 효과적으로 활용될 수 있을 것으로 판단된다.

• 한국전기화학회:학술대회논문집
• /
• 한국전기화학회 1998년도 제1회 총회 및 추계학술발표회
• /
• pp.40-40
• /
• 1998

• 한국지반공학회:학술대회논문집
• /
• 한국지반공학회 2008년도 춘계 학술발표회 초청강연 및 논문집
• /
• pp.1036-1041
• /
• 2008

In order to analysis the reason of sliding failure in embankment slope under construction in soft soil area, a model section located in Gimhae Region in Gyeongsangnam-Do, where the sliding failure had been occurred during embankment works in soft soil area, had been selected. This area had been firstly treated with the Pack Drain Method, and additional embankment works of 9.7 meters out of total 14 meters in thickness had been under construction. The results of analysis showed that the reason of sliding failure were overspeed in embankment construction and the overestimation of design factors in calculating strength of each layer of embankment and poor management and inaccuracy reading of measurement devices.