• Journal of the Society of Cosmetic Scientists of Korea
• /
• v.42 no.3
• /
• pp.247-255
• /
• 2016

In order to select a strain that forms a Biocellulose (BC), strain producing acetic acid was selected from commercially available kombucha. Through SM broth it was confirmed that the strain is a gram negative bacteria in the form of rods having no motility through a phase contrast microscope. The result of phylogenetic inference analysis based on 16S rDNA sequence analysis for the identification of strains was most closely related to Gluconobacter uchimurae (G. uchimurae) and was named G. uchimurae GYS15 strain. The strain showed the highest degree of growth when cultured for 14 days under the conditions of pH 5 and $25^{\circ}C$. Moreover, it showed the highest degree of growth in a Glucose addition disaccharide as the optimum carbon source sucrose and fructose. Also, 0.5% NaCl, upon the addition of Malto extract, showed the highest degree of growth. Based on investigation by the optimum growth conditions to confirm the physical properties of BC obtained by culturing G. uchimurae GYS15 strains. The surface structure was observed through an scanning electron microscope (SEM) showed a high networks structure. It until $8.6{\pm}0.38$ times when the water holding capacity is re-absorbed and re-absorbed holding oil up to $6.6{\pm}0.51$ times confirmed. In conclusion, using these material properties, it was possible to confirm the possibility of a variety of cosmetic materials and mask pack materials.

• Journal of the Korea Society for Simulation
• /
• v.28 no.2
• /
• pp.35-48
• /
• 2019

Domestic hydraulic drifters till now have been developed by benchmarking products from overseas leading companies. However, they do not have excellent impact performance as they are not suitable for characteristics (large flow rate and low pressure) of Korean hydraulic drill power pack, and therefore, research on the optimum design has not made much headway. This study performs multi-objective function optimization for hydraulic drifters whose capacity has been redesigned to deal with the large flow rate, and also with the help of this function, it aims to improve impact power and reduce supply and surge pressure. A summary of the research study is as follows: First, we set goals for improving impact power, supply pressure, and surge pressure, and then perform multi-objective function optimization on them. After that, we secure the reliability of the optimized analytical model by comparing the test results of the prototype built by the optimized design with the analysis results of the analytical model. This study used SimulationX, that is the hydraulic system analysis software, and EasyDesign, which is a multi-objective function optimization program. Through this research, we have achieved the results that satisfy the goal of developing high power drifters suitable for Korean type hydraulic drills.

• Journal of the Korean Chemical Society
• /
• v.64 no.6
• /
• pp.327-333
• /
• 2020

Performance of a portable GC that can be utilized for the real time determination of volatile organic compounds in air was evaluated. It employs purified/compressed ambient air as the carrier gas eliminating the need for high pressure gas tanks. The compact system with dimensions of 35 × 26 × 15 ㎤ and weight of 5 kg is powered by either a 24 V DC external adapter or battery pack. Chromatograms of the mixture sample including benzene, toluene, ethylbenzene, and oxylene at concentrations of 1 ppmv and 20 ppmv represent a good reproducibility: 3.79% and 0.48% relative standard deviations (RSDs) for peak area variations; 0.40% and 0.08% RSDs for retention times. The method detection limit was 0.09 ppmv. A 30 m long, 0.28 mm I.D. column operated at an optimal condition yielded a peak capacity of 61 with good resolution for a 10 min isothermal analysis. The relative standard deviations (RSD) of the peak area variations and retention times during consecutive measurements over 27 h were less than 2.4%RSD and 0.5%RSD, respectively. Thus, this instrument makes it suitable for continuous and field analysis of low-concentration VOC mixtures in the indoor/outdoor environment as well as the spillage accident of hazardous chemicals.

• Korean Circulation Journal
• /
• v.53 no.8
• /
• pp.535-547
• /
• 2023

Background and Objectives: Veno-arterial extracorporeal membrane oxygenation (VAECMO) as a bridge to eventual heart transplantation (HT) is increasingly used worldwide. However, the effect of different VA-ECMO types on HT outcomes remains unclear. Methods: This was a retrospective observational study of 111 patients receiving VA-ECMO and awaiting HT. We assessed 3 ECMO configuration groups: peripheral (n=76), central (n=12), and peripheral to central ECMO conversion (n=23). Cox proportional hazards regression and landmark analysis were conducted to analyze the effect of the ECMO configuration on HT and in-hospital mortality rates. We also evaluated adverse events during ECMO support. Results: HT was performed in the peripheral (n=48, 63.2%), central (n=10, 83.3%), and conversion (n=11, 47.8%) ECMO groups (p=0.133) with a median interval of 10.5, 16, and 30 days, respectively (p<0.001). The cumulative incidence of HT was significantly lower in the conversion group (hazard ratio, 0.292, 95% confidence interval, 0.145-0.586, p=0.001). However, there was no difference in in-hospital mortality (log-rank p=0.433). In the landmark analysis, in-hospital mortality did not differ significantly among the 3 groups. Although we did note a trend toward lower HT in the conversion group, the difference was not statistically significant. Surgical site bleeding occurred mainly in the central, while limb ischemia occurred mainly in the peripheral groups. Conclusions: We suggest that if patients are being stably supported with their initial ECMO configuration, whether it is central or peripheral, it should be maintained, and ECMO conversion should only be cautiously performed when necessary.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.37C no.9
• /
• pp.811-820
• /
• 2012

GNSS signal is vulnerable to jamming signal because of well-known signal structure and weak signal power. For these reasons, the need for analysis of jamming effects and anti-jamming techniques of is increasing. In this paper, a GNSS signal generator is designed which includes a radio wave propagation model for six kind of tactical environments and a body masking model for the reception environment of a vehicle. The radio wave propagation model for downtown, rural, forest, coastline, waste land and snow or ice area is designed using two-ray model. The body masking model is designed the effect which the antenna is affected by the reception environment of a vehicle and radiation pattern from a user configuration. The performance of generated signals from the GNSS signal generator considering reception environment of a vehicle is evaluated by a commercial GPS L1 receiver(NordNav) in normal and jamming environment. Also, the generated GNSS signal is compared to a commercial GPS L1 H/W based RF signal generator(STR4500). The results show that the designed GNSS signal generator in a normal environment compared to the same navigation performance. In jamming environment, it is shown that the body masking effect and GNSS signal acquisition and tracking loss in compliance with the jamming signal are precisely working in the reception environment of a vehicle.

• Journal of Preventive Medicine and Public Health
• /
• v.32 no.3
• /
• pp.297-305
• /
• 1999

Objectives: This study was conducted to evaluate factors related to the intention of participation in a worksite smoking cessation program. Methods: To explain the health behavior of participating intention in a worksite smoking cessation program, the health belief model(HBM) was used as study model, and 144 self-administered questionnaires were completed by electronic company workers. Variables of the health belief model were composed of perceived susceptibility to smokinginduced disease, perceived severity of smoking-induced disease, economical gain as perceived benefit of smoking cessation, and nicotine dependency as perceived barrier of smoking cessation. Variables of sociodemographics, smoking status, knowledge about adverse health effects of smoking, and cues to smoking cessation were used as modifying factors. Results: Perceived severity(POR=1.99, 95% CI: 1.03-3.83), perceived benefit(POR=2.11, 95% CI: 1.07-4.17), and perceived barrier(POR=0.29, 95% CI: 0.11-0.76) were significant variables to the intention of participation in a worksite smoking cessation program in the logistic regression analysis. The perceived severity was significantly affected by knowledge about adverse health effects of smoking(POR=2.17, 95% CI: 1.23-3.84). The perceived barrier was significantly affected by education level(POR=3.66, 95% CI: 1.17-11.44), age to first cigarette (POR=0.32, 95% CI: 0.10-0.98), pack-years(POR=5.47, 95% CI: 2.37-12.61). To the Perceived benefit, the model was not fitted. Conclusion: Our results found that counterplans improving the knowledge about adverse health effects of smoking, preventing early smoking, and decreasing smoking amount should be considered for an effective smoking ban policy.

• Korean Journal of Food Science and Technology
• /
• v.50 no.4
• /
• pp.377-382
• /
• 2018

An HPLC method was developed to quantitate a marker, oxyresveratrol (ORT), for the standardization of mulberry branch extracts (MBE) as a functional ingredient. HPLC was performed on a $C_{18}$ column with a gradient elution using 0.05% $H_3PO_4$ and acetonitrile at a flow rate of 0.8 mL/min, and detected at 320 nm. The HPLC method was validated according to Korea Food and Drug Administration (KFDA) guideline of analytical procedures with respect to specificity, linearity, accuracy and precision. Calibration curve of ORT showed high linearity ($R^2=1$), and limits of detection and quantification were 0.3 and $1.0{\mu}g/mL$, respectively. Relative standard deviation values from intra-and inter-day precision were less than 3.52 and 4.70%, respectively. Recovery rate ranged from 97.64% to 103.69%, and ORT content in MBE was approximately 3.78%. These results suggest that the HPLC method developed for the analysis of ORT in MBE is simple, efficient, and could contribute to the quality control of MBE.

• Journal of Food Hygiene and Safety
• /
• v.35 no.3
• /
• pp.213-218
• /
• 2020

This study was conducted to develop a method of analysis for 4-hydroxy-L-isoleucine in the seed extract of fenugreek (Trigonella foenum graecum), a health functional food that contains dietary fiber. The analytical method for 4-hydroxy-L-isoleucine was derived with O-phthaldialdehyde reagent (OPA) and determined by HPLC-PDA. The method was performed on a Capcell Pak C₁₈ UG 120 column (4.6×250 mm, 5 ㎛) in isocratic elution mode using disodium phosphate and acetonitrile. The validation of the developed analytical method was conducted by evaluating several parameters; selectivity, linearity, limit of detection (LOD), limit of quantification (LOQ), accuracy and repeatability. Excellent linearity (R²=0.999) was observed for 4-hydroxy-L-isoleucine in the concentration range (5-100 ㎍/mL). Observed recoveries of these compounds were found to be between 91.7 and 96.4%. Precision was between 0.2 and 2.4% relative standard deviation (%RSD).

• Journal of the Korea Concrete Institute
• /
• v.19 no.5
• /
• pp.585-593
• /
• 2007

This paper presents a model for durability evaluation of concrete structures exposed to marine environment, considering mainly a build-up of surface chloride $(C_s)$ as well as diffusion coefficient (D) and chloride threshold level $(C_{lim})$. In this study, time dependency of $C_s$ and D were extensively studied for more accurate evaluation of service life of concrete structures. An analytical solution to the Fick's second law was presented for prediction of chloride ingress for time varying $C_s$. For the time varying $C_s$, a refined model using a logarithm function for time dependent $C_s$ was proposed by the regression analysis, and averaging integrated values of the D with time over exposed duration were calculated and then used for prediction of the chloride ingress to consider time dependency of D. Durability design was also carried out for railway concrete structures exposed to marine environment to ensure 100 years of service life by using the proposed models along with the standard specification on durability in Korea. The proposed model was verified by the so-called performance-based durability design, which is widely used in Europe. Results show that the standard specification underestimates durability performances of concrete structures exposed to marine environment, so the cover depth design using current durability evaluation in the standard specifications is very much conservative. Therefore, it is found that utilizing proposed models considering time dependent characteristics of $C_s$ and D can evaluate service lift of concrete structures in marine environment more accurately.

• Journal of Preventive Medicine and Public Health
• /
• v.28 no.3 s.51
• /
• pp.715-725
• /
• 1995

This study was done for identifying the factors which affect psychologic symptoms of low back(LBP) patients. The study subjects were 43 work-related low back pain patients, 28 work-related non-low back pain patients and 47 general low back injury patients. The study materialis SCL 90-R for checking psychologic symptoms and questionnaire for obtaining general information about the subjects. The data were analyzed by model of analysis of covariance adjusted by several variables such as gender, age, education and marital status and then compared the least square means of symptom score between groups. To identify the factors that affect psychologic symptom, duration of suspension, return to work and interaction factor of these two variables were analyzed by multivariate model and we calcuated partial correlation coefficient of these variables. As a result, work-related LBP patients showed higher score of symptoms in somatization, depression and psychosis than work-related non-LBP and non-work-related LBP. Duration of suspension and return to work were significant explanatory variables for psychologic symptom score of work-related LBP. Then, we may conclude that the treatment and rehabilitation programe for work-related LBP should cover the strategy of early return to work.