• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.19 no.2
• /
• pp.200-206
• /
• 2008

To implement a mobile radio system, wave-propagation models are necessary to determine propagation characteristics accurately, Currently, the empirical/theoretical prediction models for urban environments are fairly well-developed. But there is a lack of a suitable prediction model for mountain region. So in this paper, to develop the prediction model for mountain region, propagation environments are classified based on three basic mechanisms: reflection, diffraction, penetration(absorbtion and scattering), and measurements have been performed for the classified mountain regions including open area, forest and ridge. Using the measurement data, empirical modeling of propagation characteristics are performed, and then a prediction model for mountain region is proposed.

• Journal of Life Science
• /
• v.28 no.4
• /
• pp.472-477
• /
• 2018

Pravastatin sodium is a 3-hydroxy-3-methylglutaryl-coenzyme A (HMG-CoA) reductase inhibitor used in the treatment of hypercholesterolemia by reducing cholesterol biosynthesis. Pharmaceutical excipients of commonly used including water, diluents, stabilizers, disintegrants, lubricants and colorants, and were identified for compatibility. All tests were performed by means of physical mixture of pravastatin and the excipients, which were placed in a press-through-pack (PTP) and incubated under accelerated conditions ($40^{\circ}C$ and 75% relative humidity) for 3 months. The blends of pravastatin with all excipients developed white, off white, and light brown powders, which showed no changes upon visual analysis. Accelerated conditions changed the degradation profile of pravastatin calcium in the HPLC system when mixed with different excipients. Although most excipients can have minor effects on pravastatin stability, the major degradation product from pravastatin was lactone. Low-level interaction (assay and impurity) was induced by all excipients except for microcrystalline cellulose and croscarmellose sodium. These excipients increased lactone impurity in 3 months by as much as 0.22% and 0.18% respectively. The total mixture slightly increased the lactone impurity (by 0.43% in 3 months) of pravastatin. There was no change in the assays of all excipients. These results will be helpful in studying tablet size reductions for convenience of use.

• Journal of Preventive Medicine and Public Health
• /
• v.31 no.2 s.61
• /
• pp.265-274
• /
• 1998

To investigate the change of nitric oxide(NO), copper, and zinc in serum on smoking and alcohol ingestion in young adults, this study was performed in a cross-sectional study in 127 healthy men in Korea who had HBsAg(-), HCVAb(-), and no symptomatic liver, heart, gastrointestinal, chronic diseases, and inflammatory sign(lower than 10,000 white blood cell count in CBC). At the men's entry into the study, blood samples were drawn from each subject and immediately centrifuged for analysis of NO, copper, and zinc. Each man completed a questionnaire that provided information on smoking, alcohol intake and present and past medical history NO was analyzed by HPLC(Green et al., 1982), copper and zinc by atomic absorption spectrophotometer with air-acetylene flame and total cholesterol(TC) by Spectrum EPX. Smoking(number of cigarettes per day and pack-year) and alcohol intake was grouped fertile. Copper was adjusted for age and zinc and for age and TC. NO, copper, and zinc on smoking and alcohol ingestion were analyzed in general linear models, respectively. NO, copper and zinc in serum did not show statistical differences between non-smoking and high-smoking group and no-alcohol intake and high-alcohol intake group. This study suggested that copper, zinc, and NO was not. good biological marker for early effect by smoking and alcohol intake in young adults. However, selection bias should be considered in evaluation of this result. A large prospective study will be needed in advance on usefulness of copper, zinc, and NO as a marker for risk factors and early change of atherosclerosis.

• The Journal of Korean Physical Therapy
• /
• v.21 no.3
• /
• pp.61-68
• /
• 2009

Purpose: The purpose of this study was to analyze the changes of the relative impulse of the foot when carrying 5 types of schoolbag during level walking. Methods: Forty-four normal subjects were divided into 5 groups according to the method of carrying a bag: carrying no bag (condition 1), a backpack (condition 2), a shoulder bag (condition 3), a cross bag (condition 4) and a one-hand bag (condition 5). To evaluate the partial relative impulse, 7 areas were measured on the sole of a foot: the hallux, toe, 1st metatarsal head (Met1) and the 2nd & 3rd metatarsal heads (Met2/3), the 4th & 5th metatarsal heads (Met4/5), mid foot and heel. Repeated one-way analysis of variance (ANOVA) and independent t-tests were used to analyze the statistical data. Results: In the right foot, the relative impulses in every areas revealed no significant difference (p>0.05), however, the relative impulses at Met1, Met2/3, Met4/5 and heel were significantly different between the different conditions (p<0.05). There were significant differences on comparing the relative impulse between left and right foot within one condition, the mid foot in condition 2, as well as the hallux and Met1 in condition 3 (p<0.05). In condition 4, the toe, Met1, Met4/5 and mid foot were significantly different (p<0.05). The values at the hallux, toe and Met1 in condition 5 also were significantly different (p<0.05). Conclusion: These findings showed that the symmetrical relative impulse of the foot was present in the case of carrying a backpack, but there was an extra load on specific regions and asymmetrical relative impulses in the case of carrying a shoulder bag, a across bag and a one-hand bag. (ED note: this abstract is not clear. You need to work on it.)

• Asian Pacific Journal of Cancer Prevention
• /
• v.14 no.2
• /
• pp.993-996
• /
• 2013

To evaluate the relation between smoking, alcohol drinking and risk of breast cancer in Chinese women, we conducted a case-control study with 669 cases and 682 population-based controls in Jiangsu Province of China. A structured questionnaire was used to elicit detailed information. Unconditional logistic regression analysis was performed to calculate odds ratios (ORs) and 95% confidence intervals (CIs). The results revealed that smoking, whether active or passive through the husband, was related to increased risk of breast cancer. The ORs (adjusted for age, menopausal status, educational levels, occupation, body mass index and income) were 3.55 (95%CI: 1.27-9.91) for active smoking and 1.47 (95%CI: 1.18-1.84) for passive smoking from husbands, respectively. A significant positive relationship was observed between breast cancer risk and the degree of husbands' smoking. There were significant increase trend in ORs with the daily smoked number of cigarettes of husbands, the passive smoking years from husbands and the pack-years of husbands' smoking (trend test: p=0.00003, 0.00013 and 0.0001, respectively). Alcohol consumption was also found to be a risk factor. The findings of this study in particular suggest that husbands' smoking increases risk of breast cancer in Chinese women.

• Proceedings of the KOSOMBE Conference
• /
• v.1998 no.11
• /
• pp.155-156
• /
• 1998

Screw loosening and subsequent pullout can be attributed to the reduction in bone mineral density in the vertebrae manifested by osteoporosis in which the decrease in fixation strength between the cancellous bone and screw threads are accelerated by repeated loads exerted by patients own weight and activities following the surgery. In this study, the change in pullout strength of the pedicle screws was investigated before and after repeated loads were imparted. For this purpose. Diapason pedicle screws $(6.7\times40mm)$ were inserted onto fresh porcine spine specimens (T1-L5) after bone mineral density was measured using a DEXA. With an MTS, an axial load was applied at a loading rate of 0.33mm/sec until failure to measure the maximum pullout strength. Flexion moment of 7.5N-m was then imparted at 0.5Hz for 2000 cycles. It was found that the maximum pullout strength was exponentially related to BMD regardless of load types ($107.71\;\times\;\exp^{(1.43{\times}BMD)}r^2=0.93$, P<0.0001 without repeated load; ($107.71\;\times\;\exp^{(2.19{\times}BMD)}r^2=0.78$, P<0.0001 with repeated load). The results suggest that the reduction in pullout strength for pedicle screws is far more prominent in osteoporotic spine than in normal spine especially as number of repeated load was increased. More importantly, it was demonstrated that the level of bone mineral density and the activity level of the patient should be evaluated in more detail for successful implementation of pedicle screw systems in spinal surgery.

• Tribology and Lubricants
• /
• v.33 no.2
• /
• pp.71-78
• /
• 2017

The drag torque in the wet clutch system of a dual clutch transmission system is investigated because it is relatively high, up to 10 of the total output torque of the engine, even when the clutch is in the disengagement state with zero torque transfer. Drag torque results from the shear resistance of the DCTF between the friction pad and separator plate. To reduce the drag torque for ensuring fuel economy, the groove pattern of the wet clutch friction pad is designed to have a high flow rate through the pattern groove. In this study, four types of groove patterns on the friction pad are designed. The volume fraction of the DCTF (VOF) and hydrodynamic pressure developments in the gap between the friction pad and separator plate are computed to correlate with the computation of the drag torque. From the computational results, it is found that a high VOF and hydrodynamics increase the drag torque resulting from the shear resistance of the DCTF. Therefore, a patterned groove design should be used for increasing the flow rate to have more air parts in the gap to reduce the drag torque. In this study, ANSYS FLUENT is used to solve the flow analysis.

• Journal of Fashion Business
• /
• v.19 no.4
• /
• pp.92-108
• /
• 2015

This study aimed at developing a down jacket prototype that utilized sunlight as an alternative energy source with no air pollution. The jacket is filled with flexible solar panels and has a heat-generating function and LED function. In this study, three smart down jacket prototypes were developed, and the jacket's capabilities were demonstrated through the thermal effect on the performance test. The typical output voltage of the flexible solar panels was 6.4V. By connecting the 2 solar cell modules in series, the final output voltage was 12.8V. A battery charge regulator module was used the KA 7809 (TO-220) of 9V. Three heating pads were to be inserted into the belly of the jacket as direct thermal heating elements, and the LED module was configured, separated by a flash and an indicator. The smart down jacket was designed to prevent damage to the down pack without the individual devices' interfering with the human body's motion. Because this study provides insulation from extreme cold with a purpose, the jacket was tested for heat insulation properties of non-heating, heating on the back, heating on the abdomen, and heating on both the back and abdomen in a sitting posture in a static state. Thermal property analysis results from examining the average skin temperature, core temperature, and the temperature and humidity within clothing showed, that placing a heating element in one place was more effective than distributing the heating elements in different locations. Heating on the back was the most effective for maintaining optimal skin temperature, core temperature, and humidity, whereas heating on the abdomen was not effective for maintaining optimal skin temperature, core temperature, or humidity within clothing because of the gap between the jacket and the body.

• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.31 no.6C
• /
• pp.637-644
• /
• 2006

This paper presents performance and implementation comparisons of standard and fast DCT algorithms that are commonly used for subband filter bank in MPEG audio coders. The comparison is made according to the architectural difference of the implementation hardware. Fast DCT algorithms are known to have much less computational complexity than the standard method that involves computing a vector dot product of cosine coefficient. But, due to structural irregularity, fast DCT algorithms require extra cycles to generate the addresses for operands and to realign interim data. When algorithms are implemented using DSP processors that provide special operations such as single-cycle MAC (multiply-accumulate), zero-overhead nested loop, the standard algorithm is more advantageous than the fast algorithms. Also, in case of the finite-precision processing, the error performance of the standard method is far superior to that of the fast algorithms. In this paper, truncation errors and algorithmic suitability are analyzed and implementation results are provided to support the analysis.

• Korean Journal of Agricultural Science
• /
• v.45 no.2
• /
• pp.248-257
• /
• 2018

Overexpression of AtCYP78A7, a gene encoding a cytochrome P450 protein, has been reported to improve tolerance to drought stress in genetically modified (GM) rice (Oryza sativa L.). The aim of this study was to evaluate the potential allergenicity and acute oral toxicity of the AtCYP78A7 protein expressed in GM rice. Bioinformatics analysis of the amino acid sequence of AtCYP78A7 did not identify any similarities with any known allergens or toxins. It showed that no known allergen had more than a 35% amino acid sequence homology with the AtCYP78A7 protein over an 80 amino acid window or more than 8 consecutive identical amino acids. The gene encoding the AtCYP78A7 protein was cloned in the pGEX-4T-1 vector and expressed in E. coli. Then, the AtCYP78A7 protein was purified and analyzed for acute oral toxicity. The AtCYP78A7 protein was fed at a dose of 2,000 mg/kg body weight in mice, and the changes in mortalities, clinical findings, and body weight were monitored for 14 days after the dosing. Necropsy was carried out on day 14. The protein did not cause any adverse effects when it was orally administered to mice at 2000 mg/kg body weight. These results indicate that the AtCYP78A7 protein expressed in GM rice would not be a potential allergen or toxin.