• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2006.06a
• /
• pp.300-300
• /
• 2006

일반적으로 PZT계 세라믹스는 높은 결정격자 이방성을 가지고 있으며, 우수한 압전특성을 가지고 있다. 이러한 특성을 보이기 위해서는 높은 온도($1200^{\circ}C$)에서 소결을 해야하기 때문에 PbO의 휘발로 인하여 환경문제가 야기되고 있다. 이러한 문제를 해결하기 위해서 Li, Na같은 액상소결제를 첨가시켜 소결온도를 낮추는 연구를 하고 있다. 본 연구에서는 $Pb(Mn_{1/3}Nb_{2/3})O_3$-PZT세라믹스가 갖는 높은 결정격자 이방성을 유지시키고, 저온소결시 압전 및 유전특성을 향상시키기 위해서 $Pb(Mg_{1/2}W_{1/2})O_3$를 치환시켜 attrition milling 시간에 따른 PWM-PMN-PZT세라믹스의 압전특성을 조사하였다.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.20 no.9
• /
• pp.766-770
• /
• 2007

In this study, in order to develop low temperature sintering ceramics for multilayer piezoelectric actuator, $0.07Pb(Mn_{1/3}Nb_{2/3})O_3-xPb(Ni_{1/3}Nb_{2/3})O_3-(0.93-x)Pb(Zr,Ti)O_3$ ceramics system were fabricated using $Li_2CO_3-Bi_2O_3-CuO$ sintering aids and the specimens were sintered at $930^{\circ}C$. Thereafter, their piezoelectric and dielectric characteristics were investigated according to the amount of PNN substitution. At 9 mol% PNN substitution, density, electromechanical coupling factor ($k_p$), dielectric constant, mechanical quality factor ($Q_m$) and piezoelectric constant ($d_{33}$) showed the optimum value of $7.86g/cm^3$, 0.60, 1640, 1323 and 387 pC/N, respectively. It is considered that these values are suitable for piezoelectric divece application such ad multilayer piezoelectric actuator and ultrasonic vibrator with pure Ag internal electrode.

• Electrical & Electronic Materials
• /
• v.8 no.2
• /
• pp.190-195
• /
• 1995

Temperature dependences of the dielectric constant K(T), remanent polarization $P_{r}$, (T), effective birefringence overbar .DELTA.n(T), transmitted light intensity and quadratic electro optic coefficient R(T) of the two-stage sintered xBa(L $a_{1}$2/N $b_{1}$2/) $O_{3}$-(1-x)Pb(Z $r_{y}$ $Ti_{1-y}$) $O_{3}$(x=0.085, 0.09, 0.40.leq.y.leq.0.70) ceramics were investigated. Increasing the PbZr $O_{3}$ contents, the crystal structure of a specimen was changed from a tetragonal phase to a rhombohedral and cubic phase, and the phase transition was showed a diffuse phase transition(DPT) characteristics. In the compositions which located on the PE-FE phase boundary, the discrepancy was observed between the Curie temperature and temperature which a microscopic polarization and effective birefringence were disappeared.red.d.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2002.11a
• /
• pp.326-329
• /
• 2002

In this study, to develop the low temperature sintering ceramics for multilayer piezoelectric transformer, $0.02Pb(Sb_{1/2}Nb_{1/2})O_{3}-0.13Pb(Ni_{1/3}Nb_{2/3}O_3-0.85Pb(Zr,Ti)O_{3}$ system ceramics were manufactured with the variations of sintering temperature between 1,090 and $1240^{\circ}C$ and its dielectric and piezoelectric characteristics were investigated. With increasing the sintering temperature, electromechanical coupling factor (kp) and mechanical quality factor(Qm) were decreased. At $1,180^{\circ}C$ sintered specimen showed maximum value of 0.535 electromechanical coupling factor (kp). On the other hand,. The specimen sintered at $1,180^{\circ}C$ showed the maximum value of ${\varepsilon}r$=1,571, Qm=1,181 respectively.

• The Korean Journal of Ceramics
• /
• v.6 no.1
• /
• pp.64-67
• /
• 2000

Reactively sputtered $Pb(Zr,Ti)O_3$(PZT) films on $IrO_2$and Ir were evaluated with particular consideration on interface properties. The $IrO_2$and Ir were previously annealed at $650^{\circ}C$ in $O_2$or $N_2$atmosphere, respectively. There was no appreciable roughening in the interface of the $PZT/IrO_2$respective to that of the PZT/Ir; the rms roughness of $IrO_2$and Ir was about 3nm and 10nm, respectively. The ferroelectric properties of the $PZT/IrO_2$were found to be better than that of the PZT/Ir; however, the leakage current of the $PZT/IrO_2$was slightly larger than that of the PZT/Ir. The $PZT/IrO_2$thin films did not exhibit any fatigue up to $10^{11}$ cycles; the $P^*\;_r-P^r$ value decreased only from 16.6 to 14$\mu$C/$\textrm{cm}^2$ until $10^{12}$ polarization reversals. On the other hand, although thin $IrO_2$layer was formed between PZT and Ir, the PZT/Ir thin films began to undergo fatigue after $10^9$ polarization reversals.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1989.06a
• /
• pp.107-109
• /
• 1989

Based on the ferroelectric microstructural residual stress model, the relation between grain size and residual elastic energy was proposed. It was found that the residual elastic energy increased with decreasing grain size by modeling and DSC results. This residual elastic energy change with grain size which induce the phase transituion mode change was the cause of a diffuse phase transition in small grain size.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2003.04a
• /
• pp.179.2-179
• /
• 2003

• Proceedings of the Materials Research Society of Korea Conference
• /
• 2005.05a
• /
• pp.132-132
• /
• 2005

• Electrical & Electronic Materials
• /
• v.1 no.4
• /
• pp.311-318
• /
• 1988

초음파센서(수신기)에 응용가능한 압전세라믹스를 제조하기 위하여 Ba변조된 Pb(ZR, Ti)O$_{3}$계 세라믹스에 MnO$_{2}$를 첨가하여 첨가량과 소성온도에 따른 영향을 조사하였다. 또한 제조된 압전세라믹스를 이용하여 초음파 수신기를 제작하여 수신특성을 확인하여 보았다. 그 겨로가 MnO$_{2}$가 0.4(wt%)첨가되었을 때 압전 g정수가 가장 크고 수신감도가 우수한 것으로 밝혀졌다.

• Proceedings of the Korean Ceranic Society Conference
• /
• 2002.10a
• /
• pp.95.2-95
• /
• 2002