• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 1999.05a
• /
• pp.317-320
• /
• 1999

In this study, the piezoelectric ceramics PZT powder was synthesized by Wet-Dry combination method. And the flexible 1-3-0 type composites were fabricated with piezoceramic PZT and Eccogel polymer matrix embedded 3rd phase. Dielectric constant of 1-3-0 type composites was lower than that of single phase PZT ceramics. Thickness mode coupling factor k/sub t/ which was comparable with single phase PZT ceramics and mechanical quality factor Qm were about 0.65 and 6, respectively. These composites are considered as a good candidates for broad-band type transducer applications. The acoustic impedance of 1-3-0 type composites was lower than that of single phase PZT ceramics. Therefore, these composites would be better used for hydrophone applications.

• Electrical & Electronic Materials
• /
• v.9 no.2
• /
• pp.146-151
• /
• 1996

PZT powders were prepared by the molten salt synthesis method. The porous PZT ceramics were made from a mixture of PZT and polyvinylalcohol(PVA) by BURPS(Bumout Plastic Sphere) technique. The 3-3 type composites were fabricated by impregnating an sintered porous PZT ceramics with various polymer matrices. The relative permittivity of 3-3 type composite specimens was shown 860-1,100 smaller than that of solid PZT ceramics(2,100), and the dissipation factors of composite specimens were about 0.02 to 0.03. The piezoelectric coefficient d$_{33}$ of composite specimens(285-328*10$^{12}$ C/N) was comparable with that of single phase PZT specimens(364*10$^{-12}$ C/N). The thickness mode coupling factor k$_{t}$(O.5-0.6) of composite specimens was comparable with that of single phase PZT specimens(k$_{t}$-0.7), and the mechanical quality factor of composite specimens was smaller than 10, and thus these 3-3 type composite specimens would be believed as a good candidates for broad band transducer applications.ons.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.35 no.5
• /
• pp.471-479
• /
• 2022

Recently, piezoelectric devices, such as ultrasonic surgery, ultrasonic atomizer, and ultrasonic speaker, are analyzed and designed by finite element simulation methods. However, the discrepancy between the design and the experiment results of the device typically occurs due to the inaccuracy of the piezoelectric material properties. To improve the simulation accuracy, the material properties of the PZT ceramics were better refined using parameter estimation method. The material parameters are elastic stiffness c^E_ij and piezoelectric constant e_ij of PZT ceramics. The impedance curve characteristics for the LTE mode of PZT ceramics were calculated. The mismatch between the simulation and the experimental data were compared and minimized by a least square method. Finally, the simulated impedance data were compared with the experimental data for the various vibration modes of PZT ceramics and the optimized material properties of PZT ceramics were verified. To further verify the accuracy, this method was also applied to piezoelectric PMN-PT single crystals.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.16 no.10
• /
• pp.892-896
• /
• 2003

In this study, microstructure and piezoelectric properties of PSN-PZT ceramics modified with BiFeO$_3$ were investigated as a function of PNW substitution. With the increase of PNW substitution, tetragonality, Curie temperature and mechanical quality factor were decreased but grain size and electromechanical coupling factor(kp) was gradually increased. At 4 mol[%] PNW substitution, maximum kp of 0.567 was obtained.

• Journal of the Korean Ceramic Society
• /
• v.30 no.11
• /
• pp.919-924
• /
• 1993

Domain structure and the spatial arrangement of tetragonal and rhombohedral phases in PZT ceramics at MPB composition were investigated with a transmission electron microscope. Fringe Contrast and doublet spot splitting were observed in the image mode and the selected area diffraction pattern, respectively. Besides, triplet spot splitting was also observed in the other part of the specimen. These observations indicate that both the single phase regions and the regions which are comosed of alternatively arranged tetragonal and rhombohedral domains coexist in a PZT ceramics at the MPB composition.

• Journal of the Korean Ceramic Society
• /
• v.25 no.2
• /
• pp.168-172
• /
• 1988

In order to prevent the PbO vaporization during calcination and to produce the powder of good sinterability, a coprecipitation method for preparing homogeneous Lead-Zirconate-Titanate (PZT) powder from aqueous salt solution is described. In this method, the PZT-ceramics show low calcining and sintering temperature, and they have good sintering and electronic properties.

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1326-1329
• /
• 1997

In this paper, PNN-PZN-PZT ceramics were fabricated with various mole ratio of the PZT[$Pb(Zr_{1/2}Tid_{1/2})O_3$]. PNN [$Pb(Ni_{1/3}Nb_{2/3})O_3$] and PZN[$Pb(Ni_{1/3}Nb_{2/3})O_3$ powders prepared by double calcination and PZT powders prepared by molten-salt synthesis method. The formation rate of perovskite phase in PNN-PZN-PZT ceramics could be obtained about 92% at PZT 0.3 mole ratio. The relative permittivity of specimen with PZT 0.3 mole ratio was shown 5,320 and appeared the relaxor ferroelectric feature. The maximum piezoelectric coefficient $d_{31}$ to be used for evaluation the displacement of piezoceramics in PNN-PZN-PZT ceramics was $324{\times}10^{-12}$(C/V) at the vicinity of morphotropic phase boundary and was larger than that of solid PZT ceramics($120{\times}10^{-12}C/V$).

• Proceedings of the KIEE Conference
• /
• 1997.07d
• /
• pp.1330-1332
• /
• 1997

In this paper, PNN-PZN-PZT ceramics were fabricated with various mole ratio of the PZT[$Pb(Zr_{1/2}Tid_{1/2})O_3$]. PNN [$Pb(Ni_{1/3}Nb_{2/3})O_3$] and PZN[$Pb(Ni_{1/3}Nb_{2/3})O_3$ powders prepared by double calcination and PZT powders prepared by molten-salt synthesis method. The formation rate of perovskite phase in PNN-PZN-PZT ceramics could be obtained about 92% at PZT 0.3 mole ratio. The relative permittivity of specimen with PZT 0.3 mole ratio was shown 5,320 and appeared the relaxor ferroelectric feature. The maximum piezoelectric coefficient $d_{31}$ to be used for evaluation the displacement of piezoceramics in PNN-PZN-PZT ceramics was $324{\times}10^{-12}$(C/V) at the vicinity of morphotropic phase boundary and was larger than that of solid PZT ceramics($120{\times}10^{-12}C/V$).

• Journal of the Korean Chemical Society
• /
• v.24 no.1
• /
• pp.53-62
• /
• 1980

The present work is concerned with the studies on the production of PZT ceramics by newly developed mixing process, which tentatively named "precipitation mixing method", consists of precipitating lead carbontate in the presence of $TiO_2$ and/or $ZrO_2$. Mixtures of $PbCO_3$ and $TiO_2$ or $ZrO_2$ were compared with those obtained by ball-milling with special emphasis on the rate and mechanism of formation of lead titanate and lead zirconate. A possiblity for obtaining PZT ceramics by "precipitation mixing method" was established.

• Journal of the Korean Ceramic Society
• /
• v.31 no.3
• /
• pp.305-311
• /
• 1994

In this paper, a change of fracture toughness and hardness in PZT-PYW ceramics system before and after poling treatment was measured to investigate the effect of composition on the mechanical properties in PZT-PYW ceramics. The hardness of the PZT-PYW ceramics increased with increasing mole fraction of PYW. The fracture toughness achieved maximum values for x=0.03. Both of the hardness and the fracture toughness also increased with poling treatment. The variation of both hardness and fracture toughness with increasing PYW mole fracture was explained by the change in microstructures such as grain size and second phase. The difference in hardness and fracture toughness in the electrically poled and unpoled specimens was also explained on the bases of internal stress.