• Journal of Radiation Protection and Research
• /
• v.38 no.4
• /
• pp.189-193
• /
• 2013

Annual dose on the containment building wall of the interim storage facility at normal condition was calculated to estimate the dose rate transition of the facility of PWR spent nuclear fuel. In this study, source term was generated by ORIGEN-ARP with 4.5 wt% initial enrichment, 45,000 MWd/MTU burnup and 10 years cooling time. Modeling of the storage facility and the containment building and radiation shielding evaluations were conducted by MCNP code depending on the distance between the wall and the facility in the building. In the case of the centralized storage system, the distance required for the annual dose rate limit from 10CFR72 was estimated to be 50 m.

• Nuclear Engineering and Technology
• /
• v.24 no.2
• /
• pp.178-182
• /
• 1992

Spent PWR fuel rods have been scanned axially and sectionally to measure the relative gamma-ray intensity of Cs-137 and then bumups of the scanned rods determined by measuring Nd-148 which has been chemically separated. From these experimental results, a linear relation(LR) between the gamma-ray intensity of Cs-137 and the bumup in the range of 10∼35 GWD/MTU was obtained. In order to validate the LR, the Cs-137 gamma-ray intensity of unknown sample was nondestructively measured and the bumup obtained by the LR was compared with that of the Nd-148 method. It is revealed that the results from both methods are in good agreement, and thus it seems to be possible to estimate the bumup of spent PWR fuel rod by measuring nondestructively gamma-ray of fission product Cs-137.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2006.11a
• /
• pp.87-88
• /
• 2006

사용후 핵연료용 수송용기의 설계 안전평가에서는 이제까지 용기에 수납되는 연료는 미조사, 즉 신연료라 가정해서 보수적으로 임계안전설계를 수행하여 왔다. 이것은 연소에 따른 연료내의 핵연료 물질의 감손 및 생성의 의한 반응도의 변동을 계산 평가하는 것이나 또는 연소로 인해 생성되는 중성자 흡수 핵종의 조성 및 함유량 등을 정확히 계산 평가하는 것이 복잡해서 곤란했던 것으로 그 요인을 들 수 있다. 사용 후 핵연료를 신 연료로 가정하는 등의 불합리성을 해소하고, 안전성을 잃지 않고 사용 후 핵연료 운반용기 들의 경제성을 추구하는 기운이 높아지고, 관련 연구가 적극적으로 진척되게 되었다. 그 결과 연소에 따른 연료내의 핵연료 물질의 감손 생성과 핵분열 생성물 등에 의한 반응도의 저하, 즉 중성자 실효 증배율의 저하를 고려한 것을 사용 후 핵연료용 캐스크 설계 안전평가에 취할 수 있게 되었다. 연소도 크레디트를 채용함으로서 사용후 핵연료내의 핵연료물질량은 실제로 존재하는 양을 사용하는 것이 되므로 초기 농축도가 높은 고연소도 연료에서 그 효과가 보다 크게 될 것이다. 이것은 연소도 크레디트 채용에 따라 연료 바스켓의 중성자흡수제 사용량 감소가 가능해져 사용 캐스크의 수를 줄일 수 있어 경제성 향상이 기대되고 아울러 그이 취급 횟수 및 수송횟수가 감소됨에 따라 안전성의 향상도 기대된다.

• Journal of the Korean Chemical Society
• /
• v.44 no.6
• /
• pp.581-586
• /
• 2000

Separation and coulometric titration method were applied for the determination of plutonium content in samples of PWR spent fuel. Plutonium was separated on an anion exchange(AG MP-1) column and determined by the controlled-potential coulometric titration. In this study, we discussed some experimental conditions related to the separation and determination of plutonium in PWR spent fuel samples. Average accuracy(recovery of plutonium) for the determination of 0.230∼3.02 mg plutonium standard was 99.36%. Average precision(relative standard deviation, RSD) for the determination of 0.250∼0.450 mg plutonium in PWR spent fuel samples was 0.38%.

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.11a
• /
• pp.475-476
• /
• 2009

CFD 방법을 이용하여 건식저장 용기내 사용후핵연료 열전달 해석을 수행한 결과 연료봉의 붕괴열에 의한 내부 유체의 자연대류 현상과 상세 핵연료 온도분포를 예측할 수 있음을 확인하였다. 향후에는 다양한 시험조건에서 복사열전달을 포함한 정밀한 CFD 계산을 수행하여 피복관 온도분포의 예측치를 실험결과와 비교할 예정이다.

• Journal of Nuclear Fuel Cycle and Waste Technology(JNFCWT)
• /
• v.14 no.4
• /
• pp.435-443
• /
• 2016

This paper describes the development of a dry operation process for PWR spent nuclear fuel, which is currently stored in the domestic NPP's storage pool, using a dual purpose metal cask. Domestic NNPs have had experience with wet type transportation of PWR spent nuclear fuel between neighboring NPPs since the early 1990s, but no experience with dry type operation. For this reason, we developed a specific operation process and also confirmed the safety of the major cask components and its spent nuclear fuel during the dual purpose metal cask operation process. We also describe the short term operation process that was established to be completed within 21 hours and propose the allowable working time for each step (15 hours for wet process, 3 hours for drain process and 3 hours for vacuum drying process).

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2010.05a
• /
• pp.279-280
• /
• 2010

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2009.11a
• /
• pp.477-478
• /
• 2009

• Proceedings of the Korean Radioactive Waste Society Conference
• /
• 2016.10a
• /
• pp.205-206
• /
• 2016

• Analytical Science and Technology
• /
• v.17 no.5
• /
• pp.381-387
• /
• 2004

To characterize chemically a spent pressurized water reactor (PWR) fuel, an analytical method for trace amounts of tritium ($^3H$) in it has been established. Considering the effective management of radioactive wastes generated through the whole experimental process and the radiological safety for analysts, a separation condition under which $^{14}C$ and $^3H$ can be sequentially recovered from a single fuel sample was optimized using simulated spent PWR fuel dissolved solutions. $^{14}CO_2$ evolved during dissolution of the spent PWR fuels with nitric acid was trapped in an aliquot of 1.5 M NaOH. $^{129}I_2$ which was volatilized along with $^{14}CO_2$ was removed using a silver nitrate-impregnated silica gel absorbent. $^3H$ remaining in the fuel dissolved solution as $^3H_2O$ was selectively recovered by distillation. Its recovery yield was 97.9% with a relative standard deviation of 0.9% (n=3). $^3H$ in a spent PWR fuel with burnup value of 37,000 MWd/MtU was analyzed, reliability of this analytical method being evaluated by standard addition method.