• 전력전자학회논문지
• /
• 제2권3호
• /
• pp.51-57
• /
• 1997

본 논문은 기존의 히스테리시스 전류 제어기에 N.P.C(Neutral-Point-Clamped) 인버터의 구조를 교류 전동기 시스템의 적용하므로서 전동기 시스템의 토오크 특성의 개선 및 손실의 원인이 되는 고조파 성분을 감소시키기 위한 기법을 제안하였다. 제안된 스위칭 기법은 기존의 히스테리시스 전류제어기를 적용하는 인버터와 비교하여 50%의 스위칭 주파수의 저감 효과를 기할 수 있다. 본 논문에서는 제안된 스위칭 기법의 특성을 기존의 스위칭 기법과 비교하여 시뮬레이션을 시행함으로서 제안된 스위칭 기법의 우수성을 입증하였다.

• 대한전기학회논문지
• /
• 제36권4호
• /
• pp.259-266
• /
• 1987

In order to drive motor control system precisely, the motor is to be controlled by mmfs and current with sinusoidal waveforms. In this paper the Delta Modulation (DM) Technique is used for generating PWM pulse with sinusoidal waveform. However the motor currents yet contain odd harmonics due to leakage inductances, speed and exitation. To reduce harmonics, the parameter adaptive control method is introduced. That is, Req.C parameter of Delta Modulator is controlled adaptively by parameter adaptor. The adaptive signal is achieved by the difference between motor current and reference waveform, and this signal is converted to the voltage commend signal by adaptive mechanism. The test reslts show that this system is operated smoothly over a wide range of motor speed and motor current is controlled to be sinusoidal waveform adaptively.

• 전력전자학회논문지
• /
• 제27권4호
• /
• pp.305-315
• /
• 2022

In this paper, phase current ripples and torque ripples of six-phase PM synchronous motor controlled by interleaved PWM are analyzed. The cause of the increase of phase current ripple in the interleaved PWM was mathematically analyzed based on the mutual inductance of stator windings and effective voltage vector. Simulation and experiment verified that the DQ current ripple and torque ripple can be reduced by interleaved PWM control. The FFT analysis of torque waveform confirmed that the magnitude of harmonic torque corresponding to double the PWM frequency was reduced.

• 대한전기학회논문지
• /
• 제39권3호
• /
• pp.273-280
• /
• 1990

To prevent the shoot-through phenomena in a PWM inverter, a short dead time is usually provided between a pair of switching transistors in the same leg of the inverter. In this approach, the amount of the dead time is designed to meet the worst case condition of the inverter transistors and the base drive elements. So, in normal cases, relatively large portion of the dead time is unnecessary and it results in an undesirablecurrent waveform distortion and generates ripple torque on the motor shaft. In this paper, a new base drive method to remove the undesirable portion of the dead time is described. The method senses the transistor on/off states to interlock the other transistor of the leg without the external dead time. Also, for the transistors of large current rating, the Darlington drive circuit is combined to the proposed method and is tested to verify the effectiveness. The experimental results of the proposed method are described and compared with those of the conventional dead time method.

• Journal of Electrical Engineering and Technology
• /
• 제8권5호
• /
• pp.1107-1115
• /
• 2013

A new PWM technique for a two-phase BLDC motor fed by a two-phase eight-switch inverter is proposed in this paper. It is well known that a two-phase eight-switch inverter can significantly improve power output compared with a two-phase six-switch inverter in a two-phase motor drive. To drive the two-phase BLDC motor simply and effectively, two normal PWM strategies are investigated to manage speed regulation. However, under the conditions of low speed and light load, especially during the braking process, the current in a short time of one period is near zero, which is a discontinuous waveform every half period. To solve it, a novel PWM technique is investigated to improve the operational performance of normal technique. Using the new PWM scheme, the current continues every half period and the braking performance is improved. The effectiveness of the proposed PWM method is verified through the experiments.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2002년도 전력전자학술대회 논문집
• /
• pp.63-68
• /
• 2002

In a utility interactive photovoltaic generation system, a PWM inverter is used for the connection between the photovoltaic arrays and the utility. The do current becomes pulsated when the conventional inverter system operates in the continuous current mode and dc current pulsation causes the distortion of the ac current waveform. To reduce pulsation of dc input current, This paper presents a Buck-Boost PWM power inverter and its application for residential photovoltaic system. The PWM power inverter is realized by combining two sets of a high frequency Buck-Boost chopper and by making it operate in the discontinuous conduction mode. In this paper, we show the Buck-Boost PWM power inverter circuit, its equivalent circuit and basic differential equations and the power flow characteristics are clarified when the proposed Inverter is interconnected with the utility lines. In conclusion, the proposed inverter system provides a sinusoidal ac current for domestic loads and the utility line with unity power factor

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1997년도 추계학술대회 논문집 학회본부
• /
• pp.426-428
• /
• 1997

This paper presents the linearized optimal PWM techniques for current source GTO converter. This proposed method is to linearize an optimal PWM modulation strategy so that the turn-on/off-periods of the GTO switches can be computed on-line in real-time for any modulation index. This allows the rapid and continuous regulation of the DC output current while producing the sinusoidal AC input current waveform and unit power factor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 춘계학술대회 논문집 전기기기 및 에너지변환시스템부문
• /
• pp.50-52
• /
• 2003

This paper presents characteristics analysis of brushless DC motor(BLDCM) which driven by two types of PWM mode. The phase current and torque ripples are generated differently at each PWM mode. So they have a different influence on motor characteristics. In this paper, we have analyzed characteristics of BLDCM using time-stepped voltage source finite element method. The effect of two types of PWM mode had been confirmed by comparing each phase current and torque ripple waveform. The compared simulation result is useful to select a better PWM mode.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 B
• /
• pp.744-746
• /
• 2003

This paper presents characteristics analysis of brushless DC motor(BLDCM) which is driven by four types of PWM mode. The Phase current, radial forte and torque ripples are generated differently at each PWM mode. So they have different influences on motor characteristics. In this paper, we analyzed characteristics of BLDCM using time-stepped voltage source finite element method. The effect of four types of PWM mode had been confirmed by comparing each phase current and torque ripple waveform. The compared simulation result is useful to select a better PWM mode.

• 한국조명전기설비학회지:조명전기설비
• /
• 제7권3호
• /
• pp.27-33
• /
• 1993

본 논문은 캐리어 주파수 20kHz 이상의 고주파 전압형 PWM 인버터를 구동하기 위한 디지털 제어기에 관한 연구이다.적절한 PWM 패턴을 선택하기 위하여 기존의 PWM을 분석하였고, 비동기형 계단 정현파를 기준신호로 하여 제어기의 PWM 패턴을 구하였으며, PWM 제어방법은 가변 캐리어 비를 이용하였다.PWM 제어기는 모두 디지털 방식으로 구성하였다. 특히, 제시된 제어기의 구성은 연산 및 데이터 처리와 PWM 패턴 합성을 8비트 원칩 마이크로프로세서와 디지털 로직으로 나누어 설계하므로써 제어에 대한 속응성 및 제어성을 개선하였다. 또 변조도 데이터를 9비트로 출력하도록 프로그램을 적절히 이용하여 데이터 처리능력을 높였다.디지털 제어기는 회로구성을 i8051과 원칩 EPLD로 구성하였고, 설계된 제어기는 전압형 인버터를 동작시켜 제어성을 고찰하였다. 그리고 전압형 인버터 시스템의 고조파와 전류파형을 평가 분석하였다.