• Journal of the Korean Institute of Intelligent Systems
• /
• v.14 no.6
• /
• pp.726-731
• /
• 2004

This paper proposes a pulse-width-modulation (PWM) controller design technique using intelligent digital redesign. Intelligent digital redesign is to convert a well-designed analog fuzzy-model-based controller into an equivalent pulse-amplitude-modulation (PAM) digital controller maintaining the original analog control system in the sense of state-matching. In similar line of conversion concept, the redesigned PAM intelligent digital controller is converted into a PWM controller using the equivalent area principle. To convincingly visualize the proposed technique, an computer simulation example-attitude control of nonlinear artificial satellite system is included.

• Proceedings of the Korean Institute of Intelligent Systems Conference
• /
• 2008.04a
• /
• pp.373-376
• /
• 2008

본 논문은 퍼지 펄스 폭 변조 (Pulse-width-modulation: PWM) 시스템의 안정도에 대해 다루게 된다. 복잡성을 가진 비선형 시스템은 Takagi-Sugeno (T-S) 퍼지 모델에 의해 효율적으로 논의될 수 있다. 본 논문에서는 기존의 LTI 시스템에서 논의 되었던 PWM 제어기 설계 문제를 퍼지 시스템으로 확장시킴으로써 PWM 제어기에 대한 논의의 저변을 확대시키고자 한다. 또한, 리아푸노프 (Lyapunov) 안정도에 기반 한 안정도 증명을 통해 퍼지 PWM 시스템의 안정도를 분석하고자 한다.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.7 no.3
• /
• pp.224-236
• /
• 2002

In this paper, a comparative study on the performance of two-phase and three-phase randomized pulse position PWM scheme for mitigation of audible switching acoustic noise in motor drives is done. In the randomized Pulse Position PW, each of two-Phase or three-phase PWM Pulses is located randomly in each switching interval. Simulation and experimental efforts were executed to investigate the spread effects of Power spectra of inverter output voltage, waveforms of ripple current and audible switching acoustic noise. As results, two-phase RP% scheme is more effective from the viewpoint of switching loss and ease of implementation while the three-phase RPWM scheme is more effective from the viewpoint of the spread effects of power spectra. Also, from the view point of the audible switching acoustic noise in motor drives, two-phase and three-phase RPW schemes are nearly the same.

• Proceedings of the KIPE Conference
• /
• 2002.07a
• /
• pp.347-354
• /
• 2002

In this paper, a comparative study on the performance of two-phase and three-phase randomized pulse position PWM scheme for mitigation of audible switching acoustic noise in motor drives Is done. In the randomized pulse position PWM, each of two-phase or three-phase PWM pulses is located randomly in each switching interval. Simulation and experimental efforts were executed to investigate the spread effects of power spectra of inverter output voltage, waveforms of ripple current and audible switching acoustic noise.

• Proceedings of the KIPE Conference
• /
• 2003.11a
• /
• pp.163-167
• /
• 2003

본 논문에서는 PWM 펄스를 랜덤하게 위치시킬 수 있는 새로운 3상 공간벡터 RPWM (Random PWM) 기법을 제안하고 있다. 기존의 RPWM 방식과 달리 SVPWM에 의해 발생된 PWM 펄스를 랜덤하게 위치시키는 원리를 각 섹터마다 달리 적용하여 쉽게 RPWM을 구현하는 기법을 제안한다. 제안된 기법의 타당성 검증을 위하여, 제안된 RPWM (Random PWM) 기법 알고리즘에 대해 DSP를 이용한 IGBT 인버터 구성에 의한 실험을 수행하였다. 이에 대한 결과 중, 특히 10000 rpm 이상의 고속운전특성에서의 인버터 출력 전압 및 전류의 고조파 스펙트럼을 넓은 주파수 영역으로 고루 분산시켜 제안된 RPWM의 특정고조파의 저감효과를 입증하고자 한다

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.241-242
• /
• 2014

본 논문에서는 PWM 스위칭 주파수 신호 주입 센서리스 제어와 전압 펄스 인가 방법을 혼합한 회전자의 초기 위치 추정 기법을 제안하였다. d축 전류제어기 출력에 PWM 스위칭 주파수의 펄스 전압 신호를 주입하여 회전자의 위치를 추정하고, 추정한 위치에 해당하는 전압 벡터를 인가하여 자기 포화에 따른 인덕턴스의 차이를 이용함으로써, 회전자 영구자석의 극성을 판별하였다. 실험을 통하여 제안된 기법의 타당성을 검증하였다.

• Proceedings of the KIPE Conference
• /
• 2015.07a
• /
• pp.157-158
• /
• 2015

본 논문 에서는 펄스폭 변조 영전류 천이 (PWM-ZCT) 승압형 컨버터에서 보조 회로로 흐르는 전류로 인한 도통 손실을 최소화 할 수 있는 공진 파라미터 최적화 방안을 제시한다. 제안된 해석을 통한 소프트 스위칭 기술 적용 시 추가적으로 발생한 보조 회로의 도통 손실을 최소화할 수 있다. 시뮬레이션 결과를 통하여 제안된 해석의 타당성을 입증 하였다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.13 no.1
• /
• pp.59-65
• /
• 2014

To obtain an elliptical trajectory at the cutting edge during elliptical vibration cutting, sinusoidal voltage excitations of two piezoelectric actuators have commonly been used. In this study, PWM excitation, which is relatively simple to generate, was employed and its characteristics were investigated. In experimental and analytical analyses, we found that for PWM excitation, the integer-multiple frequencies of the excitation voltage distorted the shape of the elliptical trajectory, whereas at a duty ratio(DR) of 50%, the distortion of the elliptical trajectory was minimized due to disappearance of the first overtone. When the magnitude of the maximum excitation voltage was maintained at the same level for both PWM and sinusoidal excitation, PWM (DR=50%) excitation produced a greater vibration amplitude than sinusoidal excitation but resulted in more rapid saturation of a high-frequency power amplifier.

• Journal of IKEEE
• /
• v.18 no.3
• /
• pp.409-419
• /
• 2014

This paper proposes a new temperature control algorithm and system configuration of the pTMS(personal Thermal Massage System). By controlling the pulse width of the PWM(Pulse Width Modulation), the temparature of the heating lamp can be controlled stably, which is indispensable to the massage function. This technology is also adapted to the 'thermal massage', 'thermal acupressure', 'thermal moxibustion' functions of medical equipments. The temperature could be set at between $40^{\circ}C{\sim}70^{\circ}C$ by increments of $5^{\circ}C$, the control could be made in real time by increments of $1^{\circ}C$, and the temperature is displayed on the monitor by triggering every 2 seconds. when the present temperature is equal to the preset temperature, the PWM signal is minimized, and when the present temperature is higher than the preset temperature, overheating is prevented by interrupting the PWM output signal. When the difference of temperature exceeds $4^{\circ}C$, the PWM control is maximized in order for the system to reach the target temperature within a short period of time.

• Proceedings of the Korean Society of Precision Engineering Conference
• /
• 1995.04b
• /
• pp.283-288
• /
• 1995

Dynamic model of 3-way PWM high speed solenoid valve was derived considering reluctance and inductance of electromagnet through valve spool by Bondgraph modeling method. Computer simulations of hydraulic system with 3-wayhigh speed solenoid valve were performed and the results were compared to te experimental results in order to validate the PWM valve dynamic model obtained.