• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1989년도 하계종합학술대회 논문집
• /
• pp.567-570
• /
• 1989

A constant V/F control system of voltage contrlled PWM inverter has a unstable operation of the low- speed and the light-load. In this paper, the authors propose stability control with idealized operation of induction motor by the neglect of primary leakage inductance and resistance. Also ldealized operation system is adopted voltage error, feed back impedance circuit, and increasing resistance from dead time of switching is compensated by the soft ware with u-processors. The proposed simulation of the idealized control method is proved at the low-speed operation for three phase induction motor.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1999년도 하계학술대회 논문집 B
• /
• pp.630-632
• /
• 1999

In this paper, we develop intelligent digitally redesigned PAM and PWM fuzzy controllers for nonlinear systems. Takagi-Sugeno fuzzy model is used to model the nonlinear systems and a continuous-time fuzzy-model-based controller is designed based on the extended parallel-distributed-compensation method. The digital controllers are determined from existing analogue controllers. The proposed method provides an accurate and effective method for digital control of continuous·time nonlinear systems and enables us to efficiently implement a digital controller via pre-determined continuous-time TS fuzzy-model-based controller. We have applied the proposed method to the balancing problem of the inverted pendulum to show the effectiveness and feasibility of the method.

• 전기학회논문지
• /
• 제64권9호
• /
• pp.1380-1384
• /
• 2015

The DC motor has the strong characteristics in the speed response, the system parameter variations and the external influence and is used as the speed controller with its good starting torque in the distributing industry. However development of the Microprocessor which is for high speed switching program can make better control system. This paper introduce to design of the high-effective DC motor controller that is using Software Bang-Bang Program of Fuzzy algorithm and to verify a PI controller and a Fuzzy controller.

• 전기학회논문지
• /
• 제58권1호
• /
• pp.69-76
• /
• 2009

This paper describes sensorless high-speed control for 45,000rpm/22kw type PMSM by using iterative adaptive sliding mode observer. The proposed algorithm is based on sensorless vector control by on-line estimating the speed of rotor in the wide speed operating range between the starting operation. In addition, it shows the enhanced performance of the iterative adaptive observer by lessening its chattering and getting stable response in limited PWM period. The simulation and experiment results show the reliable performance of the proposed algorithm through starting to high speed operating range.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1990년도 하계학술대회 논문집
• /
• pp.319-323
• /
• 1990

VSS controller is suited for systems where the robust performances in the presence of parameter variations and disturbances are most important. The practical realization of such robust VSS algorithm using DSP ($TMS_{32020}$) is dicussed in this paper. PWH-like control signal which is produced by directly using VSS control algorithm substitutes the PWM amplifier. And the armature current is used in construction of switching function for the purpose of increasing switching frequency. In order to compensate steady state error produced by various external disturbances practical integral compensator is considered.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2000년도 하계학술대회 논문집 B
• /
• pp.1151-1154
• /
• 2000

Phase angle control ac drives system gains a high popularity due to their simple implementation despite the disadvantage of their poor input power factor especially for large values of phase delay angle. Furthermore it generates subharmononic current at specific phase angle. As input current of do drive systems are sinusoidal, the power factor and subharmonic current characteristics are improve. This paper presents the application of a PWM control technique of do chopper system to reduce the subharmonic current and its characteristics using single-phase dc chopper drive system of universal motor.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2001년도 하계종합학술대회 논문집(5)
• /
• pp.143-146
• /
• 2001

Servomotors, especially linear brushless servomotors have numerous advantages over ball screws, timing belts, rack/pinion drives and friction drives compared wi th rotary servomotors This paper proposes an linear regression method as the estimated ion of unknown parameters from the linear brushless DC motor The estimated parameters are used to tune the gain of controller. In order to agree with this purpose, Digital Signal Processor (TMS320F240), developed for implementation of the motor control, is adopted in this study. The processor playing an important role in controller has A/D converters, PWM generators, riched I/O ports internally.

• 한국지능시스템학회:학술대회논문집
• /
• 한국퍼지및지능시스템학회 1998년도 추계학술대회 학술발표 논문집
• /
• pp.244-249
• /
• 1998

Abstract-A speed controller of a induction motor using Microcontroller and Fuzzy logic is presented in the paper. Generally fuzzy logic controller is known as a controller which 춤 be coped with a non-linear and a complex system. A fuzzy logic is used for robust and fast speed control and space vector modulation method is used for PWM wave generation in this proposed system. The results of experiment show excellence of the proposed system and that the proposed system is appropriate to control the speed of a induction motor for industrial application

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 2003년도 하계학술대회 논문집 D
• /
• pp.2772-2774
• /
• 2003

The power source of inverter welder stable power of low voltage and high current. Because if shouldn't be, it is caused to spark between the parent metal and the peak. So that, we designed to be base on high frequency transformer and reactor of DC part. Then, we optimized control of PWM, current rising slant, voltage, current, pulse current and inverter out-put voltage. Also we designed PCB for EMI and noises.

• 전력전자학회:학술대회논문집
• /
• 전력전자학회 2008년도 추계학술대회 논문집
• /
• pp.54-56
• /
• 2008

본 논문은 연료전지 발전출력을 이용해서 정전 시에도 연속적으로 부하에 전력을 공급하기 위한 백업 시스템을 구성하는데 있어 필요한 보상장치를 제안한다. 보상장치는 삼상 PWM 정류기와 Load Bank로 구성되어 있으며 다음과 같은 기능을 수행한다. 첫째, 보상전력에 해당하는 유효전력을 소비하는 역할을 한다. 둘째, 부하에서 발생하는 무효전력을 보상해서 역률을 개선하는 기능을 수행한다. 셋째, 삼상부하에서 언밸런스가 발생할 때 역상분 유효 또는 무효전력에 해당하는 성분을 보상하는 역할을 수행한다. 넷째, 비선형 부하에서 발생하는 고조파를 보상하는 역할을 수행한다. 상기 기능을 수행하기 위한 제어알고리즘을 제안한다. 본 논문에서 제안한 보상장치의 우수성을 시뮬레이션을 통해 검증하였다.