• 한국포장학회지
• /
• 제5권1호
• /
• pp.30-36
• /
• 1999

1. 슬라이스 치즈용 복합필름의 두께는 일부 단체필름의 두께를 알수없어 총 두께로 나타냈음을 전제로 한다. K/PET 필름은 종횡 $9{\sim}20kg/mm^2$ 범위로, 일반 범용플라스틱 필름(PE, PP등)과 비교해보면 강도가 우수하다. 또 겉 포장용의 경우 $61.6{\mu}PVDC/PE/Al-vac/CPS,\;96.9{\mu}PE/PVDC/PE,\;79.3{\mu}PET/PVDC/L-LDPE,\;72.2{\mu}PET/PVDC/PE/Al-vac/PE$ 복합필름도 종횡 $4{\sim}10kg/15mm$범위로 외부로부터 보호하는데 매우 우수하다. 2. 치즈의 투습도에서 $40{\mu}PVDC$나 $15{\mu}K/PET$필름은 대략 $10g/m^2/24hr$정도로 습기 차단성이 일반 범용플라스틱 필름과 비교해보면 매우 우수하다. 또 겉포장용 복합필름으로 $61.6{\mu}PVOC/PE/Al-vac/CSP{\cdot}4.91<96.9{\mu}PE/PVDC/PE$ 와 $79.3{\mu}PET/PVDC/L-LDPE$ 약 $3.8<72.2{\mu}PET/PVDC/PE/Al-vac/PE\;0.41g/m^2{\cdot}24hr$로서 모두 차단성이 우수 하지만 특히 $72.2{\mu}PET/PVDC/PE/Al-vac/PE$ 필름이 가장 우수하므로 장기저장시 사용이 좋을 것으로 사료된다. 3. 치즈의 기체투과도에서 1) 산소투과도는 PVDC 필름은 $130cc/m^2{\cdot}24hr{\cdot}atm$로 K/PET 필름의 $19.9cc/m^2{\cdot}24hr{\cdot}atm$에 비해 약 6.5배로 가급적 K/PET필름의 사용이 요망된다. 그리고 겉포장용으로 $61.6{\mu}PVDC/PE/Al-vac/CPS\;25.3>96.9{\mu}PE/PVDC/PE\;15.3>79.3{\mu}PET/PVDC/L-LDPE\;13.4>72.2{\mu}PET/PVDC/Al-vac/PE\;1.81cc/m^2.24hr{\cdot}atm$ 복합필름에서 PET/PVDC/Al-vac/PE필름은 장기저장시 사용이 좋을 것으로 사료된다. 2) 질소가스 및 탄산가스투과도 각각 $61.6{\mu}PVDC/PE/Al-vac/CPS\;12.5,\;59.8>96.9{\mu}PE/PVDC/PE\;7.1,\;42.0>79.3{\mu}ET/PVDC/L-LDPE\;6.4,\;34.2>72.2{\mu}PET/PVDC/PE/Al-vac/PE\;0.74,\;4.2cc/m^2.24hr{\cdot}atm$으로 가장 우수한 PET/PVDC/PE/Al-vac/PE 복합필름이 장기저장용으로 이용이 좋을 것으로 사료된다.

• 한국식품과학회지
• /
• 제21권2호
• /
• pp.252-257
• /
• 1989

OPP/PVDC 도포/LDPE 복합 필름과 Nylon/LDPE복합 필름을 사용하여 비엔나 소시지를 포장하며 품질수명을 비교한 결과는 다음과 같다. 두 복합 필름의 투습도와 가스투과도는 PVDC 도포 필름이 현저히 적었다. Nylon복합 필름은 가로, 세로 사이의 신장율이 비슷했으나 PVDC 도포 필름은 가로, 세로의 신장율이 4.5배 정도 차이가 있었다. 비엔나 소시지의 Critical Quality Index로서 VBN 이 더 적합했고 이 VBN 변화치로부터 구한 반응 속도상수로부터 $Q_{10}$치를 계산하여 예측한 품질수명은 $15^{\circ}C$ 저장의 경우 Nylon 복합 필름은 25일, PVDC 도포 필름은 31일, $5^{\circ}C$ 저장의 경우 Nylon복합 필름은 32일, PVDC도포 필름은 41일로 나타났다. PVDC도포 필름의 품질수명이 6일에서 9일정도 더 길었다.

• 한국표면공학회지
• /
• 제52권6호
• /
• pp.326-333
• /
• 2019

The microporous carbon derived from PVDC-resin by a simple heat-treatment under an inert atmosphere exhibits a reasonable specific capacitance for a supercapacitor's electrode. However, the capacitance was rapidly decreased at high charge/discharge rate. The micropores present in an electrode surface hinder the entrance of an electrolyte ion onto the entire surface. To induce the meso-sized pores during the carbonization of PVDC-resin, Mg(OH)₂ was utilized as a hard template. The porous carbon made from the mixture of PVD-Cresin and Mg(OH)₂ include mesopores as well as micropores. The induced mesopores does not homogeneously distributed on the entire surface of the synthesized carbon. The PVDC-resin and Mg(OH)₂ are dissolved in the dimethylformamide for the hard template to evolve the pores on the synthesized carbon uniformly. The carbon made from PVDC-resin with solvent and a hard template contains mostly mesopores resulting in the high power performance. The reduced amount of solvent in the precursor derives the carbon with high specific surface area and high power density.

• 한국표면공학회지
• /
• 제57권4호
• /
• pp.285-295
• /
• 2024

PVDC-resin transforms into porous carbon through the removal of heteroatoms during heat treatment. When PVDC-resin mixed with chemical agent undergoes heat treatment, it transforms into porous carbon with a significant surface area. In this study, we aim to produce porous carbon using PVDC-resin as a precursor by mixing it with an inexpensive CuO agent in various ratios (1:1, 1:2) and varying the process temperatures (750℃, 950℃). To utilize the developed porous carbon as electrode for supercapacitors, this study explored the formation of micropores and mesopores during the activation process. The porous characteristics and specific surface area of the synthesized porous carbon were estimated using N₂ isotherm. The specific capacitance and rate capability required for supercapacitor electrodes were evaluated through cyclic voltammetry. Experimental results demonstrated that when the precursor and agent were mixed in a 1:2 ratio, a high surface areal carbon with numerous micropores and mesopores was obtained. When the activation was performed at 950℃, no impurities remained from the agent, resulting in high rate performance. The porous carbon synthesized using PVDC-resin and CuO demonstrated high specific surface area and excellent rate capability, indicating its potential as an electrode material for supercapacitors.

• 한국미생물·생명공학회지
• /
• 제23권4호
• /
• pp.492-498
• /
• 1995

Net type polyvinylidene chloride (PVDC) media and cillium type polyethlene polypropylene (PEPP) media were installed in the aereted submerged biofilm reactors. Synthetic phenol wastewater for feed were made to contain 1,480 mg of phenol per liter of water. The organic loading range of reactors were 0.439-0.456 kg COD/m$_{3}$, 0.882 - 0.919 kg COD/m$_{3}$ and 1.199-1.339 kg COD/m$_{3}$. Comparing PVDC to PEPP media, the bacterial number found in biofilm on PEPP were slightly higher. With the low temperature (10$\circ$C), the number of bacteria was some what deceered. Number of bacterial strains identified from PVDC were 23 and those from PEPP were 42. Genera identified in the PVDC media were Flavobacterium (47.8%), Unidentified (17.6%), Pseudomonas (13.0%), Micrococcus (8.7%) and Beggratoa (8.7%). Genera identified in the PEPP media reactor were Pseudomonas (35.7%), Alcaligenes (19.0%), Aeromonas (14.33%) and Micrococcus (11.9%), In the steady, state, a filamentous bacteria, type 1701 was identified in all of the reactors. Paramecium sp. and fungi were present in the PVDC media reactor. While, Difflugia sp, Paramecium sp. and fungi were found in the PEPP media reactor. The low diversity of protozoa was ascribed to high concentration of phenol.

• Carbon letters
• /
• 제13권4호
• /
• pp.236-242
• /
• 2012

Poly(vinylidene chloride) (PVDC)-derived nanoporous carbons were prepared by various activation methods: heat-treatment under an inert atmosphere, steam activation, and potassium hydroxide (KOH) activation at 873, 1073, and 1273 K. The pore structures of PVDC-derived nanoporous carbons were characterized by the $N_2$ adsorption technique at 77 K. Heat treatment in an inert atmosphere increased the specific surface area and micropore volume with elevating temperature, while the average micropore width near 0.65 nm was not significantly changed, reflecting the characteristic pore structure of ultramicroporous carbon. Steam activation for PVDC at 873 and 1073 K also yielded ultramicroporosity. On the other hand, the steam activated sample at 1273 K had a wider average micropore width of 1.48 nm, correlating with a supermicropore. The KOH activation increased the micropore volume with elevating temperature, which is accompanied by enlargement of the average micropore width from 0.67 to 1.12 nm. The average pore widths of KOH-activated samples were strongly governed by the activation temperature. We expect that these approaches can be utilized to simply control the porosity of PVDC-derived nanoporous carbons.

• 한국축산식품학회지
• /
• 제43권3호
• /
• pp.441-453
• /
• 2023

The objective of this study was to investigate the physicochemical and microbiological characteristics of round of Hanwoo by vacuum packaging film materials, polyvinylidene chloride (PVDC) and ethylene vinyl alcohol (EVOH). The packaged beef samples were stored in refrigerated conditions (2±1℃) for 12 weeks. Physicochemical analysis with pH, surface color, thiobarbituric acid reactive substances (TBARS) values, and volatile basic nitrogen (VBN) values and microbiological analysis with aerobic plate count (APC) and metagenomic analysis of packaged beef samples were performed. The pH and surface color did not change substantially during the 12 weeks and EVOH-packaged beef tended to be lower than those of PVDC-packaged beef. PVDC- and EVOH-packaged samples showed low TBARS and VBN values below standard limits. APC did not exceed 7 Log CFU/g for both samples during storage. In metagenomic analysis, Firmicutes and Lactobacillaceae were dominant phylum and family of the PVDC- and EVOH-packaged beef. In both packaged samples, Dellaglioa algida was the dominant species during storage, with the notable difference being the presence of Lactococcus piscium. Therefore, this study provided the information on the quality of vacuum-packaged beef according to different vacuum films for long-term refrigerated storage.

• 발명특허
• /
• 제14권10호통권164호
• /
• pp.62-65
• /
• 1989

• 한국고분자학회지:고분자과학과기술
• /
• 제12권2호
• /
• pp.233-238
• /
• 2001

• 한국건축시공학회:학술대회논문집
• /
• 한국건축시공학회 2009년도 추계 학술논문 발표대회
• /
• pp.55-59
• /
• 2009

The epoxy resin without hardener can harden by a ring-opening reaction in the presence of the alkalies produced by the hydration of cement in epoxy-modified mortars and concretes. This paper investigates the effect of curing conditions on the strength improvement of polymer-modified mortars using bisphenol A-type epoxy resin without hardener. The polymer-modified mortars using epoxy resin are prepared with various polymer-cement ratios, and subjected to ideal, water, dry and heat cures. In the heat cure, the epoxy-modified mortars are sealed or unsealed with a PVDC (polyvinylidene chloride) film. The epoxy-modified mortars are tested for flexural and compressive strengths at desired curing methods. The microstructures of the epoxy-modified mortars are also observed by scanning electron microscope. The effects of curing conditions on the strength development of the epoxy-modified mortars are examined. From the test results, the marked effectiveness of the heat cure under the PVDC film sealing against the development of the strength of the epoxy-modified mortar without the hardener is recognized. The flexural and compressive strengths of 7-day-90℃ heat-cured, PVDC film-sealed epoxy-modified mortars without hardener reach 7 to 17MPa and 24 to 44MPa respectively, and are two to three times of Unmodified mortar. Such high strength development of the epoxy-modified mortars may be achieved by the dense microstructure formation by cement hydrates and the hardening of the epoxy resin in the mortars.