• Applied Chemistry for Engineering
• /
• v.33 no.4
• /
• pp.367-372
• /
• 2022

The effect of the addition of a polyvinylchloride (PVC) non-solvent to a PVC-tetrahydrofuran (THF) solution on the surface properties of the PVC thin film was analyzed. The non-solvents used were composed of alcohol-based and non-alcoholic ones. Surface morphologies of PVC thin films according to the addition of the non-solvent were compared. In addition, the hydrophobic properties relying on the surface characteristics were compared. The micro-bubbles generated in the preparation of PVC-THF solution affected the surface morphology of the thin film. In order to implement the normal surface physical properties of the coating thin film at the relatively high concentration of PVC-THF solution, the selection of appropriate drying method was required. When an alcohol-based non-solvent was added, a PVC thin film having a granular porous surface was obtained and exhibited super hydrophobic properties. The volume ratio of the PVC-THF solution to the non-solvent affects the surface shape of the coating thin film. The larger the amount of non-solvent was added, the more advantageous it was to form a super hydrophobic PVC thin film.

• Resources Recycling
• /
• v.11 no.1
• /
• pp.37-42
• /
• 2002

This study was conducted in order to remove Poly vinyl chloride(PVC) from the waste plastic film mixture. The fittings of Air Table was modified to increase the separation efficiency of PVC and PE(poly ethylene). PE and PVC was successfully separated from PVC-PE film mixture with the yield of PE 90% or more and with his grade of 99% or more, using the improved Air Table. The details of the separation condition and results will be discussed in this paper. Dry separation, Waste plastic film, PVC, Air Table. The details of the separation condition and results will be discussed in this paper.

• Applied Chemistry for Engineering
• /
• v.26 no.1
• /
• pp.35-39
• /
• 2015

Polyvinylchloride (PVC) thin films having a microporous structure could be prepared by using the solubility difference in solvents. PVC thin film with a water contact angle of $150^{\circ}$ or more was obtained from the PVC solution consisting of the mixture of tetrahydrofuran as a solvent and propanol as a non-solvent. In the drying process of dip-coated PVC film, the increase of drying temperature reduced the tendency of roughened surface, which led the decrease of surface hydrophobicity. As the addition of propanol in the solution with 1 wt% PVC increased, the uniformity of surface roughness was improved. In the case of oxygen plasma treatments, even though the surface structure of PVC thin film was not notably changed, the surface property of the film was changed from the super-hydrophobicity to hydrophilicity as a function of the plasma exposing time.

• Proceedings of the IEEK Conference
• /
• 2001.10a
• /
• pp.734-737
• /
• 2001

A study was conducted in order to remove PVC from the waste plastic film mixture. The fittings of Air Table was modified to increase the separation efficiency of PVC. By using the improved air table, the PE and PVC was successfully separated from PVC-PE film mixture with the yield of PE 90% or more and with the content of PVC in PE 1% or less. The detail of the separation condition and result will be discussed in this paper.

• Korean Journal of Air-Conditioning and Refrigeration Engineering
• /
• v.19 no.11
• /
• pp.797-802
• /
• 2007

The effects of window cover on the performance of the plate type radiant cooling test system are studied. The cover materials tested are 2mm, 1mm, 0.7mm glass, Cokin 007 filter, and PVC film. The measurements are performed during the September nights of 2005 at the rooftop of the building in Seoul. The equivalent height of the building is about a building with twelve floors. The radiant cooling performance of the black painted and aluminum film coated plate are compared under no cover condition. Also the results are compared when the system has cover over the plate. In general, the covers reduce the radiant cooling temperature differences during the nighttime. Among these covers, the PVC film cover shows the best performance. In some cases, the plate with PVC film cover shows lower temperatures than the system without cover.

• The monthly packaging world
• /
• s.295
• /
• pp.90-95
• /
• 2017

• Korean Journal of Materials Research
• /
• v.3 no.4
• /
• pp.388-394
• /
• 1993

The state of aggregation and optical contrast of poly(vinyl chlorich, )(PVC)!nematic liquid crystal(LC) composite film liave been studied for a wide range(30~70 wt% LC)of film composition. In addition. effects of temperature, frequency and voltage of the applied AV electric field on the film transmittance have heen measured for a film containing (6O wt % I, C, which showed maximum optical contrast. For this particular composition of film, tlw thn'shold voltage was smalkr than .40$V_{p-p}$ at I kHZ, $25^{\circ}C$, and the rise time and decay time were smalle, r than l0Oms at 100$V_{p-p}$, I kHz, and $25^{\circ}C$.

• Journal of the Korean Electrochemical Society
• /
• v.3 no.1
• /
• pp.49-56
• /
• 2000

In the present we.k, temperature dependence of oxygen diffusivity in the polyvinyl chloride (PVC) film $D_f$ formed on gold electrode was investigated using steady-state rotating disk electrode (RDE) technique and modulated electrohydrodynamic (EHD) impedance technique. Both the diffusion rate defined as the ratio of oxygen diffusivity in the PVC film to the film thickness $D_f/\delta_f$ and the time constant $\delta_f^2/D_f$ for oxygen diffusion through the PVC film were obtained from plot of the limiting current versus disk rotation speed and from filing the EHD impedance spectra experimentally measured to those theoretically calculated on the basis of the diffusion equation for mass transport through the non-conductive and porous film, respectively. By combining measured $D_f/\delta_f$ with $\delta_f^2/D_f$, we determined $\delta_f\;and\;D_f$ at room temperature separately. As temperature increased, it appeared that the $D_f$ value measured for the PVC film-covered gold RDE was enhanced more rapidly than that $D_s$ value in the solution measured for the PVC film-free gold RDE. This means that the pores glowing with increasing temperature act as effective diffusion paths within the film. The present in-situ steady-state and modulated EHD measurements prove to be effective for determining $\delta_f\;and\;D_f$, separately and at the same time the porosity of the PVC film at temperatures below glass temperature $T_g$ of the film.

• Proceedings of the Materials Research Society of Korea Conference
• /
• 1992.05a
• /
• pp.138-138
• /
• 1992

• Food Science and Preservation
• /
• v.20 no.1
• /
• pp.7-13
• /
• 2013

Mushrooms have a shorter shelf-life than most vegetables because of their very high respiration rates, sensitivity to enzymatic browning and susceptibility to microbial spoilage. This study was conducted to investigate effects of various packaging materials and precooling on the quality of mushrooms (Agaricus bisporus). Mushrooms were precooled at $4^{\circ}C$ for three hours and packaged using the following packaging materials; 1) polyethylene (PE) film bags of 0.03 mm thickness, 2) polypropylene (PP) film bags of 0.03 mm thickness, and 3) polystyrene (PS) tray+polyvinyl chloride (PVC) wrapper. The physiological changes (weight loss, gas composition, color, firmness, and sensory evaluation) associated with postharvest deterioration were monitored for 17 days at $10^{\circ}C$. The results showed that the PP film bag maintained quality of mushrooms most effectively, especially PP film bags inhibited decreasing firmness. The samples also exhibited smaller decreases in weight loss rate (0.57%) and Hunter L value (84.44) than PS tray+PVC wrapper (7.73%, 82.19) and PE film bags (0.89%, 82.96). Sensory evaluation level in all samples remained relatively constant during the first 5 days of storage. However, PE film bags and PS tray+PVC wrapper showed lower score of flavor, texture and color than PP film bags after 8 days of storage. This study suggested that PP film bag packaging effectively extends shelf-life of mushrooms during storage.