• 펄프종이기술
• /
• 제44권1호
• /
• pp.58-64
• /
• 2012

As a first step to apply PVAm (polyvinylamine) on packaging paper by surface treatment, three types of linerboards were impregnated with PVAm solution. The effect of PVAm pick-up on strength properties of linerboard was investigated. The pick-up of PVAm was controlled by varying concentration of PVAm solution. It was found that dry tensile strength, tensile energy absorption, burst strength and compressive strength of linerboard were increased by applying PVAm. In addition, wet tensile strength was significantly improved with increasing PVAm pick-up. However, folding endurance was found to be decreased with increasing PVAm pick-up.

• 펄프종이기술
• /
• 제48권3호
• /
• pp.23-29
• /
• 2016

Effects of cationic polyvinylamine (PVAm) dry strength agent on effectiveness of optical brightening agent (OBA) during fine papermaking and the mechanism for brightness reduction of paper by PVAm was investigated by UV/Vis spectroscopy and turbidity measurement of OBA solution with PVAm. It was shown that PVAm reduced brightness of paper while opacity was not varied and tensile strength of paper was increased. Tetra-type OBA solution showed the peaks around the wavelength of 280 nm and 330 nm and the increase in the OBA concentration increased the UV absorbance in all wavelength. Addition of PVAm into the OBA solution decreased the UV absorbance at 280 nm. Turbidities of OBA and PVAm solutions were close to zero, respectively, while the turbidity value increased for the mixed solution of OBA and PVAm in various mixing ratios and the highest value was obtained when the mixing ratio of PVAm and OBA was 5:5, meaning that cationic PVAm formed complex with anionic OBA. In conclusion, cationic PVAm could form a complex with anionic OBA and that reduced UV absorbance, resulting in the reduced brightness of paper.

• 펄프종이기술
• /
• 제47권5호
• /
• pp.104-111
• /
• 2015

Factors influencing penetration of PVAm solution into paper during impregnation were investigated with ultrasonic Penetration Evenness Analyzer (PEA). Paper structure was varied by changing basis weight, freeness of pulp, calendering, and filler addition, and hydrophobicity of paper was varied by adding AKD. In addition, the viscosity of PVAm solution was varied by changing the concentration of PVAm solution. Important factors influencing penetration of PVAm solution into paper were found to be the pore structure and the hydrophobicity of paper, and the viscosity of PVAm solution. Pore structure of paper could be controlled by refining degree and filler addition and hydrophobicity of paper could be controlled by internal sizing. Denser structure of paper, higher hydrophobicity and higher liquid viscosity slowed down the penetration of PVAm solution into paper.

• 펄프종이기술
• /
• 제42권3호
• /
• pp.50-57
• /
• 2010

A mill trial was performed in a kraft paper mill in order to evaluate the possibility of utilizing dual polymer dry strength aids system consisting of cationic PVAm and anionic PAM. It was found that the cationic PVAm - anionic PAM dry strength additives can improve paper strength without significantly disturbing the stability of the kraft papermaking process when virgin UKP was used as a furnish. Tensile strength (25.3% in machine direction, 48.4% in cross machine direction), elongation of paper (31.6%, 15.6%) and tensile energy absorption (48%, 54%) were improved. Air permeability of the kraft paper was improved as well (22%). Tear strength was decreased with PVAm dry strength aids system, but it can be compensated with decreasing refining degree. In addition, the mill trial results indicate that highly air permeable kraft sack paper can be produced by the addition of PVAm dry strength agents at the stock with reduced freeness.

• 멤브레인
• /
• 제26권1호
• /
• pp.62-69
• /
• 2016

본 연구에서는 양이온 교환막으로 Sulfonated poly(ether ether ketone) (SPEEK)를 사용하였고, 음이온 교환막은 poly(vinyl alcohol) (PVA)과 poly(vinyl amine) (PVAm)을 혼합하여 가교시킨 막을 이용하였으며, 이에 대한 막결합형 축전식 탈염 공정(Membrane capacitive deionization, MCDI)의 성능실험을 진행하였다. 음이온 교환막의 함수율, 이온교환용량, FT-IR 측정을 통하여 막의 특성을 알아보았다. 음이온 교환막의 가교 시간이 3 h에서 5 h으로 증가할수록 염 제거 효율은 81.3%에서 65.7, 53.8%로 감소하였다. PVAm의 농도를 40, 60, 80%로 달리하여 실험한 결과 염 제거 효율은 81.3, 75.2, 37.7%로 PVAm이 80% 함량일 때 가장 효율이 떨어졌다. 이는 음이온 교환막의 가교 시간과 PVAm의 농도가 염제거 성능에 영향을 미치는 것으로 사료된다.

• 멤브레인
• /
• 제22권6호
• /
• pp.481-488
• /
• 2012

폴리아마이드 역삼투막 표면에 음이온 수용성 고분자인 poly(vinyl amine)(PVAm)을 코팅한 후 오염물질인 bovine serum albumin (BSA), humic acid (HA), sodium alginate (SA)에 대하여 파울링 개선효과가 있는지를 알아보고자 하였다. PVAm의 코팅과 파울링 여부는 scanning electron microscopy (SEM)을 통해 관찰하였다. BSA, HA, SA 100 ppm 공급원액을 이용하여 2, 4, 8 bar로 압력을 변화시켜 투과성능실험을 수행한 결과 PVAm으로 코팅되지 않은 막과 코팅된 막 모두 압력증가에 따라 파울링 현상이 심화되었으나 PVAm으로 코팅된 막이 BSA, HA, SA의 경우 모두에서 약 30%이상 투과도가 향상되어 파울링 개선효과가 나타나는 것을 확인할 수 있었다. HA > SA > BSA의 순으로 파울링 개선효과가 나타났으며 HA의 경우 가장 두드러지게 나타났다.

• 펄프종이기술
• /
• 제47권4호
• /
• pp.46-53
• /
• 2015

Paper strengthening system of PVAm (polyvinylamine) has been used with strong negative charge polymer for electrostatic neutralization due to strong positive charge of PVAm. Recently, because of the controversy caused by the possibility of remaining PAM monomers in white water, a search for paper strength agent that can substitute for PAM was suggested. Therefore, this study was carried out to evaluate a dry strength polymer of PVAm. Starch and CMC were used as a substitute for PAM. The dual polymer system of PVAm and anionic charge control agent such as anionic starch or CMC (carboxy methyl cellulose) were found to be very effective as strength agent compared to the chemicals based on acrylamide.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2006년도 PAN PACIFIC CONFERENCE vol.2
• /
• pp.413-415
• /
• 2006

In this article, we tried to find out the potential of new PVAm (Polyvinylamine) Polymer for optimizing Retention and Drainage system. From the mill experimental in Carton board mill, we could find out PVAm can reduce a significant chemical cost with preserving Drainage. Another case of Newsprint laboratory survey, we could find out the formation benefits from optimizing PAM system to PAM + PVAm dual system.

• 한국펄프종이공학회:학술대회논문집
• /
• 한국펄프종이공학회 2011년도 춘계학술발표회 논문집
• /
• pp.31-35
• /
• 2011

Factors influencing penetration kinetics of PVAm solution into paper were investigated with ultrasonic Penetration Evenness Analyzer (PEA). Paper structure was varied by changing basis weight, freeness of pulp, calendering, number of plies and filler addition and hydrophobicity of paper was varied by adding AKD. Important factors affecting liquid penetration are found to be pore structure and hydrophobicity of paper. Pore structure of paper can be designed by controlling refining degree and filler addition. Hydrophobicity of paper can be controlled by internal sizing.

• 한국염색가공학회지
• /
• 제2권2호
• /
• pp.33-38
• /
• 1990

Nitrocellulose [NC]-Poly(vinylamine) [PVAm] blended membranes with the change of amino group contents were prepared. The sorption and permeation of a mono-sulfonic acid dye, Orange II, in the membranes were investigated by the steady-state permeation method at $50^{\circ}C$ and pH 2.2. The results were discussed in the framework of dual sorption and diffusion theory. It was found that thesorption isotherms comprise a partition and two Langmuir type adsorption having similar binding constants. One of the latter sorption modes is due to unknown adsorption sites in NC and the other is due to the amino groups in PVAm. Apparent diffusion coefficients for collective P and L dye species, $D_P\; and D_L$, were obtained. Interpretation of $D_P$ values leads to two modes of partitions; one is such that dye is immobilized in NC and the other is the dissolution of the dye into the internal water phase.