• KSBB Journal
• /
• v.18 no.6
• /
• pp.479-484
• /
• 2003

34 strains were isolated from dyeing wastewater in order to improve treatment efficiency of dyeing wastewater containing PVA. Two strains of them were finally selected through the PVA degrading test, and identified as Microbacterium barkeri LCa and Paenibacillus amylolyticus LCb. As a result, optimal conditions for microbial growth and PVA degradation were 30$^{\circ}C$, neutral pH, starch as a carbon source, and peptone as a nitrogen source. And it was concluded that these two strains have good ability for PVA degradation. And 90% over PVA was degraded by single culture as well as a mixed culture of 2 different strains.

• Journal of Microbiology and Biotechnology
• /
• v.14 no.5
• /
• pp.1009-1013
• /
• 2004

The purpose of this study was to investigate the degradation of PVA (polyvinyl alcohol) contained in dyeing wastewater by a mixed culture of Microbacterium barkeri KCCM 10507 and Paenibacillus amylolyticus KCCM 10508. Firstly, synthetic wastewater which contained different initial concentrations of PVA varying from 50 to 3,500 mg/l were tested to obtain optimal PVA biodegradation activity of isolated strains, and the above two strains were found to degrade PVA up to 90%, when the initial concentration of PVA was 750 mg/l and below. Next, dyeing wastewater was tested by a nixed culture of the two isolated strains, and 42% and 55% of the initial concentrations of PVA and COD, respectively, was removed after five days. MLSS was gradually increased from an initial 1,400 to 2,500 mg/l, and the pH was also increased from 5.1 to 7.8. Sterilized dyeing wastewater was tested to find the effect of strains only on the biodegradation of PVA, and PVA degradation ratio and COD removal ratio were 50% and 72.8%, respectively. Thus, the results indicated that these two strains have good ability to degrade PVA and remove COD in dyeing wastewater, Finally, it is expected that if these two strains were used in the dyeing wastewater treatment, good efficiency for PVA degradation and COD removal could be achieved.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.28 no.2
• /
• pp.417-422
• /
• 1999

Algin and chitosan are known as biodegradable natural polymers. PVA is useful for the production of water soluble packaging, paper, textile sizes. PVA/Algin and PVA/chitosan films were prepared by solution blends method in the weight ratio of chitosan, algin for the purpose of useful biodegradable films. Thermal and mechanical properties of blend films such as DSC, impact strength, tensile strength and morphology by SEM were determined. As a result, The ratio of 10.0wt% PVA/chitosan films were similar to PVA at thermal and mechanical properties. PVA/Algin films were found that phase separation was occured as more than 25wt% increasing the blend ratio of algin. PVA/Algin films were observed to be less partially compatibility than 10wt% increasing the blend ratio of algin by DSC, mechanical properties and SEM. Blend films were completely degraded pH 4.0 better than 7.0, 10.0 in the buffer solution. Also, they were rapidly degraded in the enzyme( glucosidase) solution better than pH solution by enzymolysis.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.41 no.3
• /
• pp.517-526
• /
• 2017

The biodegradation and water absorption properties of lignin/poly(vinyl alcohol) (PVA) nanofibrous webs are investigated. Lignin/PVA nanofibrous webs containing 0, 50, and 85wt% of lignin were prepared via an electrospinning process to observe the effect of the lignin concentration on the biodegradability and water absorption properties of lignin/PVA nanofibrous webs. The morphology of the materials was examined by field emission scanning electron microscopy (FE-SEM) and atomic force microscopy (AFM). To understand the wetting behavior and hydrophilic nature of the electrospun lignin/PVA nanofibrous webs, the water absorbency, contact angle, and water uptake were examined. The enzymatic degradation of lignin/PVA nanofibrous webs was investigated using laccase by measuring total organic carbon (TOC) concentration over a course of 50 days. Water drops were absorbed immediately into all of the specimens. The water uptake of lignin/PVA nanofibrous webs increased as the amount of PVA in the lignin/PVA hybrid webs increased. The enzymatic degradation experiment indicated that the inherent biodegradability of lignin was retained after its transformation into nanofibers. Our findings imply that blending these two types of polymers is promising because it can lead to the development of a new range of multifunctional materials such as antimicrobial absorbent nanotextiles based on sustainable biopolymers.

• Journal of Microbiology and Biotechnology
• /
• v.11 no.6
• /
• pp.928-933
• /
• 2001

Approximately 0.1 mg/ml of polyvinyl alcohol (PVA) was degraded by the growing cell, Brevibacillus laterospours, for 30 h, and 0.2 mg/ml of PVA was degraded by the cell-free extract that was isolated from Brevibacillus laterosporus. Approximately $0.29{\mu}g$/ml of acetic acid was produced from PVA by using the cell-free extract as a catalyst for 40 min. $V_{max}\;and\;K_m$ value of purified PAV-degradation enzyme was 3.75g/l and 2.75 g/l/min in reaction with EDTA and 3.99 g/l and 2.98 g/l/min in reaction without EDTA, respectively. Molecular weight of the purified enzyme determined by SDS-PAGE was 63,000 Da. Alcohol dehydrogenase and aldehyde dehydrogenase activities were qualitatively detected on a native acrylamide gel by an active staining method, indicating the existence of the metabolic pathway to use PVA as a substrate.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.15 no.1
• /
• pp.25-32
• /
• 2009

It is now widely recognized that the disposal of packaging waste is an increasing environmental concern. Recent interest in polymer waste management of packaging materials has added incentive to the research. Poly(vinyl alcohol) is a readily biodegradable water-soluble polymer. However, this polymer cannot be processed by conventional extrusion technologies because the melting point of PVA is close to its decomposition temperature. Therefore, PVA films have been mostly prepared by solvent casting from water. Applications of PVA include sizing, binders, fibers, and films for agricultural chemicals and hospital laundry bags. A better understanding of PVA films, which also play important roles in the degradation of plastics, will expand the usage of PVA. Composite films based on PVA generally exhibit better mechanical and thermal properties than pure PVA. The aim of this review article is to review types, formation, and properties of PVA films and PVA based composite films used in packaging related researches.

• Journal of Biomedical Engineering Research
• /
• v.41 no.1
• /
• pp.1-7
• /
• 2020

Polyvinyl alcohol (PVA)/gelatin hydrogels were prepared by repeating freezing/thawing three times to evaluate the influence of PVA concentration on the strength and the cell growth behavior of the PVA/gelatin hydrogels. The swelling rate of the PVA/gelatin hydrogels decreased with raising the PVA content from 6 wt% to 12 wt% due to the formation of 3-D network inside the hydrogel. No appreciable degradation of the hydrogels was detected. As the PVA content increased from 6 wt% to 12 wt%, the strength of the PVA/gelatin hydrogels increased drastically from 6.4±0.9 kPa to 46.6±9.0 kPa. The PVA/gelatin hydrogels did not show any evidence of causing cell lysis or toxicity, implying that the hydrogels are clinically safe and effective. Although the strength increased with increasing the PVA content, the PVA/gelatin hydrogels containing 8 wt% exhibited the fastest cell growth, which is highly suitable for wound dressing requiring fast healing regeneration.

• Polymer(Korea)
• /
• v.30 no.3
• /
• pp.259-265
• /
• 2006

Small intestinal submucosa (SIS) consists of some growth factors which can stimulate cell activity, and PVA has been widely utilized in the area of wound dressing as hydrogel which is easy to be removed from wounds. In this study, native SIS sheets were coated with PVA by immersing them into 2, 4, and 10 wt% of PVA solution and then lyophilized on two type of molds to endow the prepared wound dressing with easy removal property from wounds. The mechanical properties were examined through tensile test. Moreover, enzymatic degradation, water uptake, and in vitro test were carried out to characterize the prepared SIS sheets. The tensile strength of the SIS sheets coated with PVA (PVA-SIS) were decreased, whereas the elongation were increased. Degradation ratio of the PVA-SIS sheets was decreased compare to native SIS. Water uptake ability was improved at 2 and 4 wt% of PVA. The degree of fibroblast attachment was lower than the native SIS sheets. In conclusion, this study suggests that the PVA coated SIS sheets have a potential for the applications of wound dressing and biodegradable injectable materials.

• Microbiology and Biotechnology Letters
• /
• v.23 no.2
• /
• pp.203-208
• /
• 1995

The Polyvinyl alcohol (PVA) oxidase is a key enzyme involved in degradation of PVA with PVA hydrolase. The PVA oxidase has been purified to homogeneity from the culture broth of PVA grown Pseudomonas cepacia G5Y strain by ammonium sulfate precipitation, DEAE-cellulose column chromatography, and Sephadex G-150 gel filtration. The molecular weight of the purified enzyme was estimated about 60, 000 daltons by SDS-polyacrylamid gel electrophoresis. The enzyme is most active at 45$\circ$C and at pH 8.5, and is stable below 55$\circ$C and between pH 6 and 9. The enzyme activity was strongly inhibited by Ag$^{2+}$ and Hg$^{2+}$.

• Journal of the Korean Society of Clothing and Textiles
• /
• v.35 no.11
• /
• pp.1297-1308
• /
• 2011

This research investigates the application of ZnO (zinc oxide) nanoparticles and $TiO_2$ (titanium dioxide) nanoparticles to polypropylene nonwoven fabrics via an electrospinning technique for the development of textile materials that can decompose harmful gases. To fabricate uniform ZnO nanocomposite fibers, two types of ZnO nanoparticles were applied. Colloidal $TiO_2$ nanoparticles were chosen to fabricate $TiO_2$ nano- composite fibers. ZnO/poly(vinyl alcohol) (PVA) and $TiO_2$/PVA nanocomposite fibers were electrospun under a variety of conditions that include various feed rates, electric voltages, and capillary diameters. The morphology of electrospun nanocomposite fibers was examined with a field-emission scanning electron micro- scope and a transmission electron microscope. Decomposition efficiency of gaseous materials (formaldehyde, ammonia, toluene, benzene, nitrogen dioxide, sulfur dioxide) by nanocomposite fiber webs with 3wt% nano-particles (ZnO or $TiO_2$) and 7$g/m^2$ web area density was assessed. This study shows that ZnO nanoparticles in colloid were more suitable for fabricating nanocomposite fibers in which nanoparticles are evenly dispersed than in powder. A heat treatment was applied to water-soluble PVA nanofiber webs in order to stabilize the electrospun nanocomposite fibrous structure against dissolution in water. ZnO/PVA and $TiO_2$/PVA nanofiber webs exhibited a range of degradation efficiency for different types of gases. For nitrogen dioxide, the degradation efficiency was 92.2% for ZnO nanocomposite fiber web and 87% for $TiO_2$ nanocomposite fiber web after 20 hours of UV light irradiation. The results indicate that ZnO/PVA and $TiO_2$/PVA nano- composite fiber webs have possible uses in functional textiles that can decompose harmful gases.