• Proceedings of the KIPE Conference
• /
• 2015.11a
• /
• pp.97-98
• /
• 2015

에너지 저장 시스템(ESS, Energy Storage System)은 태양광(PV)발전, 풍력(WT)발전시스템 등과 같은 신재생 에너지 출력안정화, 계통 전력품질 개선, 수용가 에너지효율화 등의 분야에 이용되고 있다. 에너지 저장 시스템은 전력변환장치와 에너지 저장 장치로 구성되며, 에너지 저장 장치로 배터리를 많이 사용하고 있다. 전력변환장치 및 제어기의 설계 및 검증을 위해서는 배터리를 전력변환장치에 연계하여야 하지만 배터리의 경우 고가에 관리가 어려운 문제로 인해 일반적으로 배터리 모의 장치를 이용한다. 본 논문에서는 대용량 에너지 저장 시스템용 전력변환장치 및 제어기의 설계와 현실적인 검증이 가능한 MW급 PCS 성능검증용 배터리 모의장치를 개발하였다.

• Proceedings of the Korean Institute of IIIuminating and Electrical Installation Engineers Conference
• /
• 2008.10a
• /
• pp.315-318
• /
• 2008

In this paper proposed the solar tracking system to use a fuzzy control order to increase an output of the PV(Photovoltaic) array. The solar tracking system operated two DC motors driving by signal of photo sensor. The control of dual axes is not an easy task due to nonlinear dynamics and unavailability of the parameters. Recently, artificial intelligent control of the fuzzy control, neural-network and genetic algorithm etc. have been studied. The fuzzy control made a nonlinear dynamics to well perform and had a robust and highly efficient characteristic about a parameter variable as well as a nonlinear characteristic. Hence the fuzzy control was used to perform the tracking system after comparing with error values of setting-up, nonlinear altitude and azimuth. In this paper designed a fuzzy controller for improving output of PV array and evaluated comparison with efficient of conventional PI controller. The data which were obtained by experiment were able to show a validity of the proposed controller.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.357-358
• /
• 2014

본 논문에서는 태양광 모듈의 최대 전력점을 추종하기 위한 제어 기법으로 부스트 컨버터(boost converter)의 불연속 전류모드(Discontinuous Current Mode)에서 주파수를 제어하는 기법을 구현 하였다. 태양광 모듈에 연결된 부스트 컨버터는 전압루프를 통하여 Perturb and Observation(P&O)기법을 사용하여 최대 전력점을 추종하였다. 부스트 컨버터의 인덕터에 흐르는 전류는 불연속 전류모드로 제어 된다. 불연속 전류모드에서의 제어기 설계는 MATLAB과 PSIM의 전달함수특성을 수학적 모델링을 통하여 비교 검증 하였으며, 모든제어는 MCU(TEXAS INSTRUMENTS사의 DSPF28335)를 통해 디지털로 제어 하였다. 제안된 기법은 단일 PV모듈이 연결된 불연속전류모드 부스트 컨버터를 통해 동작특성을 분석하였다.

• Journal of IKEEE
• /
• v.19 no.1
• /
• pp.118-123
• /
• 2015

According to the recent report, solar street lamp connected to a non Maximum Power Point Tracking(MPPT) charger, can lead to a system-wide decline in power output with as much as 30%. This paper proposes the charge controller with direct duty ration control for 250W solar street lamp in order to improve the efficiency of photovoltaic from these output power reduction. This paper covers the Pulse Width Modulation(PWM) controller and power conversion topology and analyze the MPPT method for charge controller. The power conversion part consists of push pull converter based on PWM controller using 8bit MCU in order to have lower manufacturing cost. The PWM controller with direct duty ratio control algorithm is constantly tracking the maximum power point of photovoltaic module and increases energy output power. The test results shows 97.1~97.4% MPPT efficiency and the experimental hardware is implemented based on the solar simulator condition for 241W. Thus, the implemented charge controller shows its feasibility for the real application, especially under solar street lamp.

• Solar Energy
• /
• v.18 no.1
• /
• pp.27-34
• /
• 1998

A maximum power point tracking(MPPT) converter, to enhance the converter efficiency is evaluated within the laboratory. The converter is controlled to track the maximum power point of the input photovoltaic(PV) source by varying the input and output parameter-conditions of irradiation, temperature, etc. The purpose of this paper is to develop a new maximum power point tracking(MPPT) using neural controller. Neural controller are applied to control of MPPT by boosting converter duty ratios compensation effect with 8 bit single chip 8051 microcontroller.

• Proceedings of the KIPE Conference
• /
• 2004.07b
• /
• pp.606-609
• /
• 2004

Maximum power point tracking(MPPT) is usually used for a solar power system. Many maximum power tracking techniques have been considered in the past. The microprocessors with appropriate MPPT algorithms are favored because of their flexibility and compatibility with different solar arrays. In this paper, four MPPT algorithms are analyzed and studied. Perturbation and Observation(P&O), Incremental Conductance(IncCond), which are used from the past. Improved P&O and Two-mode , which are developed P&O and IncCond algorithms. Also, the author introduces grid-connected fransformerless PV PCS to apply MPPT control. MPPT efficiency is measured by changing irradiance from $0.1kW/m^2\;to\;1kW/m^2$ and simulation was performed for each MPPT algorithm.

• Proceedings of the Korea Society for Energy Engineering kosee Conference
• /
• 1998.10a
• /
• pp.209-215
• /
• 1998

This paper deals with stand-alone Photovoltaic system(SPVS) with charge and discharge controller. Main power source of SPVS are generally solar cell and battery. therefore SPVS can be classified into variable types in accordance with connection type between battery and solar cell. Mainly used one of them is direct connection type which has advantages such as simple structure and simple controller. However most big drawback of this system is energy loss by voltage disharmony between solar cell and battery. Therefore SPVS with charge and discharge controller which can operate solar cell at maximum power point is designed and analyzed by simulation in this paper.

• Proceedings of the KIPE Conference
• /
• 2008.10a
• /
• pp.199-201
• /
• 2008

In this paper proposed the solar tracking system to use direct fuzzy control order to increase an output of the PV (Photovoltaic) array. The solar tracking system operated two DC motors driving by signal of photo sensor. The control of dual axes is not an easy task due to nonlinear dynamics and unavailability of the parameters. Recently, artificial intelligent control of the fuzzy control, neural-network and genetic algorithm etc. have been studied. The fuzzy control made a nonlinear dynamics to well perform and had a robust and highly efficient characteristic about a parameter variable as well as a nonlinear characteristic. Hence the fuzzy control was used to perform the tracking system after comparing with error values of setting-up, nonlinear altitude and azimuth. In this paper designed a DFC(Direct Fuzzy Control)controller for improving output of PV array and evaluated comparison with efficient of conventional PI controller. The data which were obtained by experiment were able to show a validity of the proposed controller.

• Journal of Advanced Marine Engineering and Technology
• /
• v.28 no.6
• /
• pp.916-921
• /
• 2004

This paper describes microprocessor-based control of photovoltaic power conditioning system. where the microprocessor is responsible for control of output power in accordance with the generated array DC power. The microprocessor includes the control algorithm of maximum power point tracking and converter control algorithm. In this power, we have designed a MPPT(Maximum Power Point Tracker) algorithm with environment factors and a PWM(Pulse Width Modulation) algorithm for high efficiency. The controller has been tested in the laboratory with the power conditioner and shows excellent performance.

• Proceedings of the KAIS Fall Conference
• /
• 2010.11a
• /
• pp.66-69
• /
• 2010

본 논문에서는 태양광전원용 3상 인버터의 배전계통 연계시의 동특성을 이해하고 해석하기 위하여, dq좌표변환과 원하는 전압의 크기와 위상을 만들어 내기 위해 사용한 비례적분 제어기(Proportinal Controller : PI), 출력전류 제어를 위한 전류제어 알고리즘, 2상/3상 변환 및 인버터의 Sinusoidal PWM방식의 인버터 설계에 대한 이론적인 알고리즘을 제시하였다. 이를 바탕으로 PSCAD/EMTDC를 이용한 태양광발전의 모델링을 수행하여, Simulation 결과와 산술적 해석의 비교, 분석을 통하여 모델링의 유효성을 확인하였다.