• Proceedings of the KIEE Conference
• /
• 2000.11a
• /
• pp.113-115
• /
• 2000

So far, it was very difficult to simulate the dispersed generation system including PV generation system using EMTP or EMTDC because the source of the dispersed generation system has a particular VI characteristic equation. In this paper, a novel simulation method of PV generation system has proposed and a new solar cell component for EMTDC is also developed. The VI characteristic equation of solar cell is used in order to realize the solar generation system in EMTDC simulation. Consequently the simulation of PV power generation system using field data is realized and acceptable results, which show close match between the real data of PV panel and the simulated data, were obtained.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.520-521
• /
• 2008

This paper deals with simulation model of the micro-grid system based on the real power system and applying PV generation system to micro-grid system. PSCAD/EMTDC simulation model is developed for use in studying the effect of the dynamics of PV generation to the micro-grid system. Simulation results show that the addition of the PV system improves the voltage profile of the area. Case studies also show that power quality at the load side is improved via voltage compensation at the load bus.

• Proceedings of the KIEE Conference
• /
• 2008.07a
• /
• pp.1144-1145
• /
• 2008

기존의 MPPT제어의 방식은 태양전지의 출력을 비교하여 최대점을 추종하는 방식으로써 최대전력점을 추종하는데 많은 시간이 필요하다. 따라서 본 논문에서는 새로운 MPPT제어법인 POS(PV Output Senseless) MPPT법에 최대전력추종의 시간이 빠른 퍼지제어를 적용하여, 기존의 MPPT제어의 방식과 퍼지제어와의 최대전력점의 추종시간을 예측할 수 없는 기상조건에서 비교분석하여 제안된 방법의 유효성을 시뮬레이션 결과를 통해 확인하였다.

• Proceedings of the KIPE Conference
• /
• 2020.08a
• /
• pp.10-12
• /
• 2020

차동 전력 조절기 시스템은 PV 모듈의 부분 음영으로 인해 전체 발전량이 감소하는 현상을 방지하기 위해서 사용한다. 기존의 차동 전력 조절기는 PV 패널과 바이패스 다이오드를 연결하여 구성한 PV 스트링당 한 개의 전력변환 장치가 필요하므로, 전력변환 장치의 개수가 증가하고 전력 시스템의 설치비용이 증가한다. 본 논문에서는 복수의 스트링에 단일 전력변환장치를 사용할 수 있는 차동 전력 조절기 모듈의 구조와 동작 알고리즘을 제안한다. 차동 전력 조절기에 대한 동작 알고리즘을 통해 다양한 부분 음영 조건 시에도 기존의 직렬 연결방식이나 차동 전력 조절 방식에 비하여 최대 발전량을 유지할 수 있다. 제안하는 차동 전력 조절기의 동작 알고리즘은 Matlab/Simulink 시뮬레이션을 통해 성능을 검증하였다.

• Journal of the Korean Solar Energy Society
• /
• v.28 no.3
• /
• pp.60-66
• /
• 2008

This study is to investigate an optimal size and position of PV system for apartment complex through the electrical load matching analysis. The 4 types of arrangements of apartment buildings are considered as follows; ㅡtype, alternative ㅡtype, ㄱtype and ㅁtype. We assume that the studied site is composed of 9 buildings. Firstly, solar access evaluation of roof and facade in apartment buildings was performed with the hourly simulations of total received insolation on each surface considering the shading effect of buildings. Electrical load profile of typical Korean apartments were investigated for the load matching analysis. To calculate an annual total PV output, we used MERIT program which is a hourly based load matching tool developed by ESRD. TRY weather data of Daejeon are applied for this analysis. Result shows that approximately 11% of total electric load of the site can be supplied by the PV system in the case of full installation of PV system at the whole south-face roof area of 9 buildings in this stuided apartment complex. Depending on a various installation option of roof and facade area, the possible ratio of PV supply in total electrical load varies from 9% to 42%. Among the 4 arrangement types, the ㅡtype revealed the best option for the maximum output of PV system.

• Proceedings of the KIPE Conference
• /
• 2018.07a
• /
• pp.120-122
• /
• 2018

본 논문은 최대 전력점을 추종하는 기존 P&O 방식의 동적 응답 특성을 향상시키기 위해 가변 스텝 사이즈를 적용한 P&O 방식 기반의 MPPT 알고리즘을 제안하였으며, 시뮬레이션 및 실험을 통해 검증하였다. 제안된 알고리즘은 듀티 제어를 통해 최대 전력점을 추종하며, 2가지 동작모드로써 가변 스텝 모드와 고속모드로 구성된다. 일사량이 일정한 경우, 가변 스텝 모드에서 듀티의 스텝 사이즈 감소를 통해 최대 전력점에서 동작점의 전압변동이 작아짐에 따라 진동이 감소하여 발전 효율이 증가한다. 일사량이 변동하는 경우, MPPT 오류를 피하기 위해 듀티와 PV 전압은 일정하게 유지하며, 일사량 변화가 끝난 시점에서 고속모드 동작을 통해 빠르게 최대 전력점으로 추종한다. 최대 전력점에 도달하면 가변 스텝 모드로 변경하여 듀티 스텝 사이즈를 감소시켜 최대 전력점을 추종한다. PV 패널, 부스트 컨버터로 구성된 PV 시스템의 시뮬레이션 및 실험을 통해 제안된 알고리즘의 타당성을 검증하였다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.13 no.11
• /
• pp.5452-5457
• /
• 2012

It is saving material cost and construction cost by replacing conventional building materials, and It has advantages for aesthetic value. In the Europe, the United States, Japan and other country research about BIPV is actively being carried out and marketability is also being infinity expanding. Arch type PV systems efficiency characteristics is different depending on PV array's directly connection, parallel connection and arches angle, but is a lack of analysis on this nowadays. When the arch type PV system design up, they consider about aesthetic value and they didn't consider about generation efficiency. In this paper, we try to improve the efficiency through optimization of arch type PV system and estimation of the efficiency parameters of the arch type PV system, such as latitude, longitude, temperature, insolation, arch angle and each kind loss from system organization. For improving Arched PV system efficiency, proposed multiple control inverter system, and using simulation tool of Arched PV system "Solar pro", flat-plate type and many arch type PV system configuration the driving characteristics were compared and analyzed.

• Proceedings of the KIEE Conference
• /
• 2002.07b
• /
• pp.1345-1347
• /
• 2002

This paper describes the computer simulation results of the photovoltaic(PV) power system for the grid-connection. The major contents of this paper consist of the modeling of the PV power system for grid-connection, the analysis of the steady-state characteristics of the system, and the analysis of the transient-state characteristics of the system, respectively.

• Journal of the Korea Convergence Society
• /
• v.2 no.3
• /
• pp.15-23
• /
• 2011

This paper deals with the analysis for the operation characteristic of PV 3 phase inverter, considering the state equation through d-q coordinates transformation, and proposes an algorithm of controlling current using PI(Proportional Integral) controller to control the output and the theory algorithm of sinusoidal PWM method to design inverter. And also this paper performs PV modelling using PSCAD/EMTDC S/W which is commonly used in analysis of distribution system and confirms effectiveness of the modelling proposed in this paper by analyzing and comparing the EMTDC/PSCAD simulation result with the theoretical method.

• 한국신재생에너지학회:학술대회논문집
• /
• 2011.11a
• /
• pp.59.2-59.2
• /
• 2011

This study presents a new method for coupling ArcGIS (popular GIS software) with TRaNsient SYstems Simulation (TRNSYS, reference software for researchers and engineers around the world) to use capabilities of the 4 and 5-parameter PV array performance models within the ArcGIS environment. Using the validated and industry-proven solar energy simulation models implemented in TRNSYS and other built-in ArcGIS functionalities, dynamic characteristics of distributed PV potential in terms of hourly, daily or monthly power outputs can be investigated with considerations of diverse options in selecting and mounting PV panels. In addition, the proposed method allows users to complete entire procedures in a single framework (i.e., a preliminary site survey using 3D building models, shading analyses to investigate usable rooftop areas with considerations of different sizes and shapes of buildings, dynamic energy simulation to examine the performances of various PV systems, visualization of the simulation results to understand spatially and temporally distributed patterns of PV potential). Therefore tedious tasks for data conversion among multiple softwares can be significantly reduced or eliminated. While the programming environment of TRNSYS is proprietary, the redistributable executable, simulation kernel and simulation engine of TRNSYS can be freely distributed to end-users. Therefore, GIS users who do not have a license of TRNSYS can also use the functionalities of solar energy simulation models within ArcGIS.