• Journal of Radiation Protection and Research
• /
• 제41권2호
• /
• pp.117-121
• /
• 2016

Background: Definition and grouping of initiating events (IEs) are important basics for probabilistic safety assessment (PSA). An IE in a spent fuel reprocessing plant (SFRP) is an event that probably leads to the release of dangerous material to jeopardize workers, public and environment. The main difference between SFRPs and nuclear power plants (NPPs) is that hazard materials spread diffusely in a SFRP and radioactive material is just one kind of hazard material. Materials and Methods: Since the research on IEs for NPPs is in-depth around the world, there are several general methods to identify IEs: reference of lists in existence, review of experience feedback, qualitative analysis method, and deductive analysis method. While failure mode and effect analysis (FMEA) is an important qualitative analysis method, master logic diagram (MLD) method is the deductive analysis method. IE identification in SFRPs should be consulted with the experience of NPPs, however the differences between SFRPs and NPPs should be considered seriously. Results and Discussion: The plutonium uranium reduction extraction (Purex) process is adopted by the technics in a model reprocessing plant. The first extraction cycle (FEC) is the pivotal process in the Purex process. Whether the FEC can function safely and steadily would directly influence the production process of the whole plant-production quality. Important facilities of the FEC are installed in the equipment cells (ECs). In this work, IEs in the FEC process were identified and categorized by FMEA and MLD two methods, based on the fact that ECs are containments in the plant. Conclusion: The results show that only two ECs in the FEC do not need to be concerned particularly with safety problems, and criticality, fire and red oil explosion are IEs which should be emphatically analyzed. The results are accordant with the references.

• Nuclear Engineering and Technology
• /
• 제39권6호
• /
• pp.731-736
• /
• 2007

Radioactive organic wastes containing acetone, alcohol, and particularly tributyl phosphate (TBP)/dodecane contaminated with uranium are extracted from the PUREX process and the decontamination of related equipment. An evaporation method that utilizes existing DU oxidation apparatuses and ventilation systems and a typical muffle furnace installed with an aspirating system are adopted. A separation method using phosphoric acid especially for the TBP/dodecane waste is also studied and evaluated. The results show that a simple evaporation process is utilizable for wastes containing acetone or alcohol with a lower boiling point. A modified muffle furnace is more appropriate to dispose directly of organic wastes having a higher boiling point, such as TBP/dodecane, without generating a condensed waste solution. It is recommended that, when the uranium concentration of TBP/dodecane waste is much higher than stipulated levels, separation technology should be applied to remove uranium from the mixture. Each type of solvent after separation can then be considered disposable below the regulatory limit in the modified furnace discussed in this study.

• 융복합기술연구소 논문집
• /
• 제2권1호
• /
• pp.7-12
• /
• 2012

Spent fuels are discharged from nuclear reactors as a result of power generations. The spent fuels would be considered as a useful resources because the main constituent is uranium and some other actinides are included in them. In order to utilize the resources chemical processes should be developed to treat the spent fuels and obtain uranium and other actinides to be fueled in a fast reactor. The technologies are categorized into wet and dry processes. In this study, the current status of such technologies is summarized to give a insight and a deep understanding on nuclear fuel cycles.

• Bulletin of the Korean Chemical Society
• /
• 제26권11호
• /
• pp.1692-1694
• /
• 2005

Spent nuclear fuel is reprocessed commercially by the chemical process to recover U and Pu. Recently, new salt-free reagents to separate plutonium and neptunium from uranium suitable for use in a single cycle flowsheet have been developed. Acetohydroxamic acid $(CH_3CONHOH)$ has been taken much interest in as a complexing agent capable of selective stripping of tetravalent actinides from U(VI) when actinides are present in the solvent stream of the advanced PUREX process. Additionally acetohydroxamic acid will rapidly reduce Np(VI) to inextractable Np(V) thus allowing the separation of Np from U. In this study, the rate equation for the reduction of Np(VI) to Np(V) in nitric acid aqueous solution has been determined as: $-[NpO_2^{2+}]$/dt = $k[NpO_2^{2+}]$[AHA] with k = 191.2 ${\pm}$ 11.2 $M^{-1}s^{-1}$ at 25 ${\pm}$ 0.5 ${^{\circ}C}$ and $[HNO_3]$ = 1.0 M. Comparison with other reductants available in the literature, acetohydroxamic acid is a strong one for $NpO_2^{2+}$.

• Nuclear Engineering and Technology
• /
• 제40권7호
• /
• pp.581-592
• /
• 2008

In this study, a conceptual pyroprocess flowsheet has been devised by combining several dry-type unit processes; its applicability as an alternative fuel cycle technology was analyzed. A key point in the evaluation of its applicability to the fuel cycle was the recovery yield of fissile materials from spent fuels as well as the proliferation resistance of the process. The recovery yields of uranium and transuranic elements (TRU) were obtained from a material balance for every unit process composing the whole pyroprocess. The material balances for several elemental groups of interest such as uranium, TRU, rare earth, gaseous fission products, and heat generating elements were calculated on the basis of the knowledge base that is available from domestic and foreign experimental results or technical information presented in open literature. The calculated result of the material balance revealed that uranium and TRU could be recovered at 98.0% and 97.0%, respectively, from a typical PWR spent fuel. Furthermore, the anticipated TRU product was found to emit a non-negligible level of $\gamma$-ray and a significantly higher level of neutrons compared to that of a typical plutonium product obtained from the PUREX process. The results indicate that the product from this conceptual pyroprocessing should be handled in a shielded cell and that this will contribute favorably to retaining proliferation resistance.

• Nuclear Engineering and Technology
• /
• 제40권3호
• /
• pp.183-190
• /
• 2008

Pyroprocessing is the optimal means of treating spent metal fuels from metal fast fuel reactors and is proposed as a potential option for GNEP in order to meet the requirements of the next generation fuel cycle. Currently, efforts for research and development are being made not only in the U.S., but also in Asian countries. Electrorefining, cathode processing by distillation, injection casting for fuel fabrication, and waste treatment must be verified by the use of genuine materials, and the engineering scale model of each device must be developed for commercial deployment. Pyroprocessing can be effectively extended to treat oxide fuels by applying an electrochemical reduction, for which various kinds of oxides are examined. A typical morphology change was observed following the electrochemical reduction, while the product composition was estimated through the process flow diagram. The products include much stronger radiation emitter than pure typical LWR Pu or weapon-grade Pu. Nevertheless, institutional measures are unavoidable to ensure proliferation-proof plant operations. The safeguard concept of a pyroprocessing plant was compared with that of a PUREX plant. The pyroprocessing is better adapted for a collocation system positioned with some reactors and a single processing facility rather than for a centralized reprocessing unit with a large scale throughput.

• Nuclear Engineering and Technology
• /
• 제43권4호
• /
• pp.317-328
• /
• 2011

Pyroprocessing technology was developed in the beginning for metal fuel treatment in the US in the 1960s. The conventional aqueous process, such as PUREX, is not appropriate for treating metal fuel. Pyroprocessing technology has advantages over the aqueous process: less proliferation risk, treatment of spent fuel with relatively high heat and radioactivity, compact equipment, etc. The addition of an oxide reduction process to the pyroprocessing metal fuel treatment enables handling of oxide spent fuel, which draws a potential option for the management of spent fuel from the PWR. In this context, KAERI has been developing pyroprocessing technology to handle the oxide spent fuel since the 1990s. This paper describes the current status of pyroprocessing technology development at KAERI from the head-end process to the waste treatment. A unit process with various scales has been tested to produce the design data associated with the scale up. A performance test of unit processes integration will be conducted at the PRIDE facility, which will be constructed by early 2012. The PRIDE facility incorporates the unit processes all together in a cell with an Ar environment. The purpose of PRIDE is to test the processes for unit process performance, operability by remote equipment, the integrity of the unit processes, process monitoring, Ar environment system operation, and safeguards related activities. The test of PRIDE will be promising for further pyroprocessing technology development.

• Nuclear Engineering and Technology
• /
• 제7권3호
• /
• pp.213-222
• /
• 1975

알카리로 처리한 국산 blown asphalt를 사용해서 방사성 폐액을 180-20$0^{\circ}C$ 범위 내에서 고화처리한 것이 산처리 한것보다 좋은 결과를 얻었으며, 방사선 조사선량이 4.0$\times$$10^{7}$ rad까지도 안정된 고화체로 존재하고 있다. 한편 40wt%의 고형분이 함유되어 있는 $^{137}$Cs-asphalt 고화체의 증류수에 의한 $^{137}$Cs의 용출율이 8.27$\times$$10^{-4}$ g/$\textrm{cm}^2$-day 인데 반하여 $^{90}$ Sr은 낮았으며, 일반적으로 증류수보다 해수때가 또한 pH가 증가함에 따라 용출율은 낮아진다.

• 방사성폐기물학회지
• /
• 제5권4호
• /
• pp.339-350
• /
• 2007

전세계 주요 원자력선진국들의 사용후핵연료 처리에 대한 기술 및 정책현황을 알아보고 향후 우리나라의 연구방향을 제시해 보았다. 재처리 정책을 가진 소위 핵연료주기 국가들은 최근 선진핵 연료주기기술에 기초한 새로운 사용후핵 연료 관리정책을 발표하였다. 그 정책은 사용후핵연료 내에 함유된 우라늄 또는 초우란 원소들을 재순환하고 고독성의 방사성 물질 및 장반감기를 가진 물질들을 소멸하거나 단반감기 원소로 변환하는데 초점을 맞추고 있다. 이러한 정책은 원자력의 자원 활용성을 높일 뿐만 아니라, 영구 처분할 고준위폐기물의 양을 감소시켜 궁극적으로 원자력의 지속가능성을 높여 준다. PUREX 방법에 기초한 습식재처리를 우선순위로 선택한 대부분의 국가들은 이 습식방법이 건식방법에 비해 실용화에 앞서 있음을 그 선택 의 근거로 든다. 그러나 습식방법은 건식에 비해 핵확산저항성 측면에서 더욱 민감하다. 왜냐하면 이 습식방법은 약간의 공정수정에 의해 순수 플루토늄을 회수 할 수 있기 때문이다. 반면에 아직까지 실용화 단계까지는 도달해 있지 않지만 고온 용융염을 사용하는 Pyroprocess와 같은 건식처리 방법은 순수한 플루토늄을 회수 할 수 없어서 핵비확산성 측면에서 유리하며, 제4세대 원자로로 고려되는 고속로의 핵연료주기 등에도 여러 가지 이점을 가지고 있다. 따라서 우리나라의 경우 현재 이 Pyroprocess에 대한 연구가 활발히 진행되고 있다.

• 방사성폐기물학회지
• /
• 제13권4호
• /
• pp.243-251
• /
• 2015

국내 원자력발전은 현재 두 번째로 큰 전력 공급 방법이며 원전의 수 역시 증가되는 것으로 계획되어 있다. 그러나, 원자력발전에 의해 발생되는 사용후핵연료에 대해서는 아직 명확한 관리 정책이 확립되어 있지 않다. 원자로 이 후 핵물질 흐름과 관련된 후행 핵연료주기는 사용후핵연료 관리를 위한 기술들의 집합이다. 따라서, 사용후핵연료 관리 정책은 핵연료주기 선택과 함께한다. 핵연료주기 선택의 중요 항목은 경제성으로 이는 사적비용과 함께 외부비용을 더해 결정되어야 한다. 직접비용 인 사적비용과 달리 간접비용인 외부비용에 대한 연구는 원전에 집중되어 있으며 핵연료주기에 대한 연구는 없는 상황이다. 본 연구에서는 핵연료주기에 적용할 수 있는 외부비용 항목들을 도출하고 정량화를 시도하였다. 핵연료주기 외부비용 평가를 위해 고려될 수 있는 핵연료주기로 OT(직접처분), DUPIC(PWR-CANDU 연결), PWR-MOX(PWR 습식재처리), Pyro-SFR (파이로 처리와 고속로 연계)의 네 가지를 선정하였다. 원자력발전의 외부비용 평가에 고려되었던 항목들을 분석하여 핵연료주기에서 에너지 공급 안보비용, 사고위험비용과 수용성 비용을 외부비용 항목으로 도출하고 추산하였다.