• Culinary science and hospitality research
• /
• v.21 no.2
• /
• pp.230-242
• /
• 2015

The purpose of this study is to investigate the quality characteristics of bread added with different levels of Pu'er tea. The overall effects of Pu'er tea on white pan bread were examined through mixograph, fermentation rates, TPA, volumes, crumbScan, color value, moisture content, and sensory evaluation. The result of the mixogram showed that all samples were found to be adequate between 3 and 5 minutes of peak time and their peak values were at 60%. Among the samples, PRaw15 had the highest fermentation rate, and it showed the lowest hardness in TPA. In addition, PRaw15 had the highest specific volume and moisture content. The results of the crumbScan showed that there were significant differences in crumb fineness, volume, and thickness between the samples. Color value also exhibited significant differences between the samples. The acceptance test showed that PRipe15 had the best overall acceptance. In conclusion, Pu'er tea affects the quality of dough and bread. Therefore, Pu'er tea could be added when bread is baked for improved health and better quality of the bread.

• Applied Chemistry for Engineering
• /
• v.9 no.4
• /
• pp.491-496
• /
• 1998

The composition of isocyanates and polyols influence prepolymeric properties of adhesive and calking sealant based on polyurethanes (PU). One component moisture curing prepolymers, which reacted with surface humidity of substrate, were synthesized in several kinds of composition. Reactivity, structural change and properties of the prepolymers were studied as a preliminary step to manufacture PU based adhesive and sealant. To study the effects of mole ratio ([NCO]/[OH]), we used toluene diisocyanate (TDI), 4, 4'-diphenylmethane diisocyanate (MDI), and ether-polyols such as PTMG and PPG which have good resistance to hydrolysis and excellent low-temperature properties. The each prepolymers could be prepared in different molecular weight without any significant structural change. The mole ratio 1.78 of [NCO] to [OH] showed the fastest reactivity. It was confirmed that effect of polyols was larger than that of isocyanates on the prepolymer in reactivity. Several kinds of compounds were manufactured with each prepolymer, and tensile and properties were tested. And the optimum quantity of curing accelerator for the PU was 0.05~0.1%. In the tensile test, TDI based PU was superior to MDI based PU, and also PTMG based PU was superior PPG based PU.

• Journal of Korean Medicine Rehabilitation
• /
• v.20 no.4
• /
• pp.57-61
• /
• 2010

Objectives : The purpose of this paper is to establish theoretical bases upon which to complement the clinical evidence in representative literature "Dongeuibokam(東醫寶鑑)" of Korean medicine. Methods: We searched applicable paragraphs about thermotherapy in "Dongeuibokam(東醫寶鑑)" and defined them as historical and theoretical bases of thermotherapy in Korean medicine. Results : Three paragraphs about thermotherapy are in "Yehyung(外形篇)" and "Jabbyung(雜病篇)" of "Dongeuibokam(東醫寶鑑)". These records to treat the disease of the internal organs and meridian are enough to explain historical and theoretical evidences. Conclusions : Although only three paragraphs are associated with thermotherapy, they mean that thermotherapy has been explained under the system of Korean medicine. It is necessary for more literatural study and clinical trials to be carried out to secure the evidence of physical therapies in Korean medicine.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2011.03a
• /
• pp.96-96
• /
• 2011

본 연구에서는 스포츠 캐주얼 웨어(스노우보드복, 골프복, 등산복 등)로 사용되는 신축성 소재의 개발로 Stretch성을 부여하기 위하여 Nylon 66 POY 소재의 가연가공 기술을 통하여 Mechanical Stretch 성능이 발현되는 소재를 개발하고자 한다. 섬유소재에 일반적으로 신축성을 부여하기 위해서는 Spandex(Polyurethane, PU)를 방적공정에서 복합 제조하는 Core Yarn과 장섬유에 Spandex를 피복하는 Covering Yarn(직물용) 형태가 있는데, Spandex로 인한 신축성은 200~800% 발현되나 PU를 사용함에 따라서 공정추가에 대한 원가상승, 균제도 불량, 몰림현상 및 PU 수축에 의한 중량감이 있으며, 또한 PU에 의한 견뢰도불량, 피복사의 벗겨짐성 등 외관상 트러블 발생빈도가 높다. 이에 따라 Spandex를 사용하지 않고 단일소재로서 사가공기술에 의해 Stretch성이 부여되는 소재를 개발하고 이의 기술을 상용화 하고자 한다. Nylon 66 POY 소재를 Disc 가연기, Pin 가연기 등의 설비를 이용하여 70d급 원사의 가연가공 공정을 진행하였다. 그리고 개발된 원사의 섬도(d), 강도(g/d), 신도(%), 크림프율(%)의 물성 시험을 통하여 Nylon66의 공정상 변화인자에 따른 기본 물성 및 Stretch 발현성을 분석하여 최적의 설비 및 공정조건을 확립하였다.

• Transactions on Electrical and Electronic Materials
• /
• v.14 no.1
• /
• pp.1-8
• /
• 2013

The present approach shows the use of nano-silica/nano-alumina in polyurethane (PU) matrix, which lead to significant improvements in the mechanical and thermal properties of the nano-composite. It is observed that with incorporation of 1% of nano-alumina into the PU matrix, there is an improvement in the tensile strength of around 50%, and for nano-silica the improvement is around 41%, at the same concentration. The morphological data shows that above 3% of the nano particles there are agglomerations in the nanocomposite. Again with the absorption of moisture, there is a decrease in the thermal and mechanical properties of the PU resin, but in this research work it is observed that with the incorporation of the nano particles, in the presence of absorbed moisture there is an improvement in mechanical and thermal properties of the composite, over that of the PU matrix.

• Proceedings of the Korean Society of Dyers and Finishers Conference
• /
• 2012.03a
• /
• pp.50-50
• /
• 2012

투습방수필름으로 많이 사용되고 있는 폴리우레탄(PU)에 광촉매 기능성을 가지고 있는 나노-$TiO_2$(Degussa P25)를 1~10wt% 복합시킨 후, 은(Ag)이온 수용액에서 자외선 조사에 의한 광증착시키는 과정을 거쳐 은이 도핑된 PU/$TiO_2$/Ag 하이브리드 멤브레인 필름을 제조하였다. (주)비에스지에서 제공받은 PU/DMF/MEK 용액에 $TiO_2$를 초음파로 균일하게 분산배합한 후, 필름캐스팅하여 만든 필름을 AgNO3 수용액에 침지시키고 254nm의 자외선을 30~120초 동안 조사하는 광증착법으로 은을 환원시켜 도핑시켰다. 은 도핑된 하이브리드 필름을 Shaking flask method에서 폐렴간균, 황색포도상구균에 대한 항균성을 측정하고, Clear zone method에서 대장균에 대한 항균성을 측정한 결과, $TiO_2$ 함량이 3wt% 이상이고 UV조사시간이 60초 이상인 경우 99.9% 이상의 항균성을 나타내는 것을 확인하였다.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.15 no.4
• /
• pp.265-273
• /
• 1995

Seeds of chicory were collected and selected with good germination, emergence and productivity. To develop chicory as a new forage crop seeds were primed with polyethylene glycol (PEG 6000) and coated with some chemicals, and tested in laboratory and field. The results obtained are summarized as follows: 1. Among the seed lines collected, PUlgAH, PU21TH, PU37CH and PU30TK were germinated more quickly and took less time for germination than the others. 2. PUI8AH was the best in emergence and growth although PU21TH showed superior germinative ability among the lines collected. 3. Chicory seeds primed with 20~25% PEG solution for three days at $10^{\circ}C$, or the seeds treated with 25% PEG solution at $15^{\circ}C$ regardless the treatment period showed good germination performances. 4. Osmotic priming with PEG accelerated the germination of chicory, but not in the field. 5. Coated seeds geminated more slowly in Petridishes but showed superior emergence and growth to those of primed or untreated seeds. Treatment 3 showed the best performances in pot experiment. 6. Coated seeds showed remarkable increase in establishment and dry matter yield especially in sod sowing compared to the other sowing method. 7. Most nutrient contents except iron and manganese of chicory were much higher than those of mixed pasture .

• Applied Chemistry for Engineering
• /
• v.9 no.2
• /
• pp.238-242
• /
• 1998

Wood powder filled phenolic resin composites of different composition were prepared and their mechanical properties were investigated for optimum conditions. The composites showed maximum mechanical strength when the phenolic resin content was 45 wt%. Polyurethane prepolymer(PU) was evaluated as a modifier of the phenolic resin composites. Blocking of the isocyanates in the PU with phenol was necessary for homogeneous mixing of raw materials for the components. Maximum mechanical strength of the PU modified composites was observed when the PU content was 5 wt%. It was found that the mechanical strength of the composites cured at $210^{\circ}C$ were higher than those of the composites cured at $150^{\circ}C$.

• Journal of Microbiology and Biotechnology
• /
• v.13 no.1
• /
• pp.70-76
• /
• 2003

The benzene removal characteritics of the polyurethane (PU) biofilter immobilized with S. maltophilia T3-c, that could efficiently degrade benzene, was investigated. Maximum capacity to eliminate benzene was maintained at $100-110g{\cdot}m^-3{\cdot}h^-1$ when space velocity (SV) ranged from 100 to $300 h^-1$ -1/, however, it decreased sharply to $55 g{\cdot}m^-3{\cdot}h^-1^$ as SV increased to $400 h^-1$. The critical elimination capacities that guaranteed $90\%$ removal of inlet loading of the PU biofilter were determined to be 70,30, and $15 g{\cdot}m^-3{\cdot}h^-1$ at SV 100,200, and $300 h^-1$, respectively. Based on the result of a kinetic analysis of the PU biofilter, maximum benzene elimination velocity ($V_m$) was $125 g{\cdot}m^-3^\;of\;PU{\cdot}h^-1$ and saturation constant ($K_m$) was $0.22 g{\cdot}m^-3^$ of benzene ($65{\mu}{\cdot}I^-1$). This study suggests that the biofilter utilizing S. maltophilia T3-c and polyurethane is a very promising technology for effectively degrading benzene.

• Journal of Biomedical Engineering Research
• /
• v.16 no.1
• /
• pp.1-8
• /
• 1995

A variety of experiments of endothelial cell seeding onto artificial vessels have been performed. To improve endothelialization, one or two components of the extracellular matrix (ECM) have been used as an underlying matrix. In this study, the whole ECM excreted from fibroblasts was used as an underlying matrix. Fetal human fibroblasts were cultured on a polyurethane (PU) sheet. After a conflu; ence was attained, the cytoskeleton and the nuclei of the fibroblast were destroyed using Triton-X. Mitomycin, or irradiation. Omental microvascular endothelial cells from adult human were seeded onto various substrates. After 12 days in culture, the cells were counted. It was observed that the ECM treated by irradiation had the highest cell number. In addition, the cells on this substrate exhibited the most typical endothelial cell morphology. For preliminary animal experiments the PU vessels (inner diameter, 1.5mm) coated with ECM were implanted in the infrarena] abdominal aorta of rat. After the vessels had been implanted for 5 weeks, it was found that the surface of the PU vessels was completely covered with endothelia] cells. In conclusion, we can state that the fibroblast-derived whole ECM makes a better underlying substrate for the endothelialization of small diameter artificial vessels.