• 제목/요약/키워드: PT-Ir

검색결과 182건 처리시간 0.029초

Octamethylenethiafulvalene과 염화오스뮴, 이리듐, 백금 및 금 화합물의 합성과 특성에 관한 연구 (Synthesis and Characterization of Octamethylenethiafulvalene Compounds with Osmium, Iridium, Platinium and Gold Chloride)

  • 정찬규;이홍우;김영진;최성낙;김영인
    • 대한화학회지
    • /
    • 제45권5호
    • /
    • pp.442-447
    • /
    • 2001
  • Octamethylenethiafulvalene(OMTTF)와 $HAuCl_4{\cdot}3H_2O$를 THF 용액 내에서 직접 반응시켜 $(OMTTF)AuCl_4$를 합성하였다. $(OMTTF)_2PtCl_4,\; (OMTTF)_2\;IrCl6{\cdot}2H_2O,\; (OMTTF)OsCl5{\cdot}THF$ 등은 각각 $H_2PtCl_6{\cdot}xH_2O,\;H_2IrCl_6{\cdot}xH_2O$$H_2OsCl_6$를 사용하여 유사한 방법으로 합성하였다. 합성된 화합물들은 자기적(EPR, 자화율 측정), 분광학적(IR, UV-Vis), 전기화학적(CV) 특성과 전기전도도를 측정하였다. 상온에서의 분말 전기전도도는 모두 ~$10^{-7}\; S{\cdot}cm^{-1}$ 이하의 낮은 전기전도도를 나타내었다. 합성 과정에서 OMTTF로부터 Au, Pt, Ir, Os 금속 화합물로 전하 이동이 이루어져 OMTTF는 완전히 이온화된 $OMTTF^+$ 양이온 라디칼로 존재하였다. $OMTTF^+$ 양이온 라디칼의 안정성은 산화·환원 전위 값에서 확인하였다. 자화율 결과로부터 $(OMTTF)_2IrCl_6{\cdot}2H_2O$$(OMTTF)OsCl5{\cdot}THF$에서는 $OMTTF^+$ 이온에 존재하는 홀전자와 중심 금속(Ir 및 Os)에 편재화된 홀전자들 사이에는 강한 반강자성 상호작용이 존재함을 알 수 있었다.

  • PDF

Preparation and Characterization of Dinuclear and Trinuclear Metal Complexes, $[(PPh_3)_2(CO)M({\mu}-E)M(CO)(PPh_3)_2]X_2$ (M=Rh, Ir; E=Pyrazine, 4,4'-Bipyridyl, $X=SO_3CF_3$; $E=Pd(CN)_4$, $Pt(CN)_4$, X=none)

  • Ko Jaejung;Lee Myunggab;Kim Moonsik;Kang Sang Ook
    • Bulletin of the Korean Chemical Society
    • /
    • 제13권2호
    • /
    • pp.158-162
    • /
    • 1992
  • Hydrocarbon solution of $(PPh_3)_2(CO)MOSO_2CF_3(M=Rh$, Ir)reacts rapidly with Pyrazine or 4,4'-bipyridyl to yield dinuclear metal complexes $[(PPh_3)_3(CO)M({\mu}-pyrazine)M(CO)(PPh_3)_2](SO_3CF_3)_2$ (I: M= RhH; III: M=Ir) or [$(PPh_3)_2$(CO)M(${\mu}$-44'-bipyridyl)M(CO)$(PPh_3)_2](SO_3CF_3)_2$, (II: M=Rh; IV: M=Ir), respectively. Compounds, I, II, III, and IV were characterized by $^1H-NMR$, $^{13}C-NMR$, $^{31}P-NMR$, and infrared spectrum. Ethanol solution of $(PPh_3)_2(CO)MOSO_2CF_3$ (M=Rh, Ir) also reacts with $(TBA)_2$M'$(CN)_4$ (M'=Pd, Pt) to yield trinuclear metal complexes [$(PPh_3)_2$(CO)dM-NCM'$(CN)_2$CN-M(CO)$(PPh_3)_2]$ (V : M=Rh, M'=Pd; VI : M=Rh, M'=Pt; VII: M=Ir, M'=Pd; VIII: M=Ir, M'=Pt). The trinuclear metal complexes V, VI, VII, and VIII are bridged by the cyanide groups. The infrared spectrum of V, VI, VII, and VIII supports the presence of the bridged cyanide and terminal cyanide group.

활성탄에 담지된 귀금속 촉매를 이용한 셀룰로우스의 폴리올로의 전환 (Conversion of Cellulose into Polyols over Noble Metal Catalysts Supported on Activated Carbon)

  • 유수진;김샛별;김용태;박은덕
    • 청정기술
    • /
    • 제16권1호
    • /
    • pp.19-25
    • /
    • 2010
  • 결정성의 셀룰로우스를 수소분위기하에서 다양한 귀금속 촉매를 이용하여 폴리올로 전환시키는 연구를 수행하였다. 촉매는 단일 귀금속(Pt, Ru, Ir, Rh, Pd)을 활성탄에 습식함침법으로 담지시켜서 제조하였으며, Pt/$\gamma-Al_2O_3$와 Pt/H-mordenite를 비교촉매로 사용하였다. 생성물은 고압액체크로마토그래피로 분석하였다. 촉매는 질소흡착, X-선 회절법, 유도결합플라즈마분광법(ICP-AES), 수소-승원환원분석($H_2$-TPR), 그리고 일산화탄소 화학흡착을 통하여 분석하였다. 셀룰로우스의 전환율은 사용한 촉매와 연관관계가 낮은 것으로 나타났으며 활성탄에 담지된 귀금속 촉매중에서 Pt/AC가 높은 폴리올의 수득률에 바람직한 것으로 조사되었다.

3 M의 염산용액에서 팔라듐(II), 백금(IV), 이리듐(IV) 및 로듐(III)의 분리를 위한 용매추출 (Solvent Extraction for the Separation of Pd(II), Pt(IV), Ir(IV) and Rh(III) from 3 M Hydrochloric Acid Solution)

  • 응우엔 티홍;이만승
    • 자원리싸이클링
    • /
    • 제26권3호
    • /
    • pp.26-31
    • /
    • 2017
  • LIX 63 은 6 M의 염산용액에서 백금(IV), 이리듐(IV) 및 로듐(III)에 비해 팔라듐(II)에 대한 선택성이 크다. 또한 염산용액의 농도는 이리듐과 LIX 63간에 일어나는 산화-환원반응에 큰 영향을 미친다. 따라서 상기 4개의 백금족 금속을 함유한 3 M의 염산용액에서 LIX 63에 의한 분리성을 검토하였다. 3 M의 염산용액에서 LIX 63은 오직 팔라듐만을 추출했으며, 6 M의 염산용액에 비해 추출율이 높았다. TBP를 사용하면 팔라듐 추출여액으로부터 백금만을 추출하는 것이 가능하였다. 백금 추출후 $NaClO_3$로 추출여액에 함유된 이리듐을 산화시킨 다음 Aliquat 336를 접촉시키면 이리듐만이 추출되었다. 각각의 용매추출단계에 대해 최적의 탈거조건을 구했다. 본 논문의 공정으로 4개의 백금족 금속을 3 M의 염산용액에서 분리하는 것이 가능하였다.

Observation of Electrocatalytic Amplification of Iridium Oxide (IrOx) Single Nanoparticle Collision on Copper Ultramicroelectrodes

  • Choi, Yong Soo;Jung, Seung Yeon;Joo, Jin Woo;Kwon, Seong Jung
    • Bulletin of the Korean Chemical Society
    • /
    • 제35권8호
    • /
    • pp.2519-2522
    • /
    • 2014
  • Recently, the observation of the electrocatalytic behavior of individual nanoparticles (NPs) by electrochemical amplification method has been reported. For example, the Iridium oxide ($IrO_x$) NP collision on the Pt UME was observed via electrocatalytic water oxidation. However, the bare Pt UME had poor reproducibility for the observation of NP collision signal and required an inconvenient surface pre-treatment for the usage. In this manuscript, we has been investigated other metal electrode such as Cu UME for the reproducible data analysis and convenient use. The $IrO_x$ NP collision was successively observed on the bare Cu UME and the reproducibility in collision frequency was improved comparing with previous case using the $NaBH_4$ pre-treated Pt UME. Also, the adhesion coefficient between NP and the Cu UME was studied for better understanding of the single NP collision system.

내구성 향상을 위한 연료전지 촉매 개발 (Synthesis and Durability of Carbon-Supported Catalysts for PEMFC)

  • 이미혜;최진성;노범욱
    • 한국수소및신에너지학회논문집
    • /
    • 제26권4호
    • /
    • pp.318-323
    • /
    • 2015
  • For commercialization of fuel cell electric vehicles, one of the key objectives is to improve durability of MEA and electrocatalysts. Regarding electrocatalysts, the major issue is to reduce carbon corrosion and dissolution of Pt caused by harsh conditions, for example, SU/SD (Start-up/Shut-down). In this research, OER (Oxygen Evolution Reaction) catalyst has been developed improvement of durability. A modified polyol process is developed by controlling the pH of the solvent to synthesize the PtIr nanocatalysts on carbon supports. Each performance of the MEAs applying PtIr and Pt are equivalent because PtIrnanocatalysts have both ORR and OER activity. Breadboard test for catalyst durability in harsh conditions and high potentialsis found that the MEA applying PtIrnanocatalysts durability is improved more than the MEA applying Pt nanocatalysts.

Characteristics of Surface Micromachined Pyroelectric Infrared Ray Focal Plane Array

  • Ryu, Sang-Ouk;Cho, Seong-Mok;Choi, Kyu-Jeong;Yoon, Sung-Min;Lee, Nam-Yeal;Yu, Byoung-Gon
    • JSTS:Journal of Semiconductor Technology and Science
    • /
    • 제5권1호
    • /
    • pp.45-51
    • /
    • 2005
  • We have developed surface micromachined Infrared ray (IR) focal plane array (FPA), in which single $SiO_{2}$ layer works as an IR absorbing plate and $Pb(Zr_{0.3}Ti_{0.7})O_{2}$ thin film served as a thermally sensitive material. There are some advantages of applying $SiO_{2}$ layer as an IR absorbing layer. First of all, the $SiO_{2}$ has good IR absorbance within $8{\sim}12{\mu}m$ spectrum range. Measured value showed about 60% absorbance of incident IR spectrum in the range. $SiO_{2}$ layer has another important merit when applied to the top of Pt/PZT/Pt stack because it works also as a supporting membrane. Consequently, the IR absorbing layer forms one body with membrane structure, which simplifies the whole MEMS process and gives robustness Ito the structure.

SBT 박막의 저온화 공정을 위한 솔-젤법과 $IrO_2$하부전극의 효과 (Effects of Sol-Gel Process and $IrO_2$Bottom Electrode for Lowering Process Temperature of SBT Thin Films)

  • 선봉균;송석표;김병호
    • 한국세라믹학회지
    • /
    • 제38권1호
    • /
    • pp.39-44
    • /
    • 2001
  • 솔-젤법으로 S $r_{0.9}$B $i_{2.1}$T $a_2$$O_{9}$ stock solution을 합성하고, Ir $O_2$/ $SiO_2$/Si 및 기판 위에 스핀코팅법으로 약 2000$\AA$ 정도의 두께를 가지고 SBT 박막을 제조하였다. Pt/Ti $O_{x}$ 전극을 사용한 SBT 박막과 비교하였을 때 Ir $O_2$전극을 사용한 SBT 박막의 경우 더 낮은 급속 열처리 온도 즉, 72$0^{\circ}C$에서 형석상에서 층상 페롭스카이트 상으로의 상전이가 관찰되었다. 그리고, Ir $O_2$전극을 사용한 SBT 박막은 낮은 열처리에서 결정성장이 이루어졌다. Ir $O_2$전극을 사용한 SBT 박막은 $650^{\circ}C$에서 열처리하였을 때 포화된 이력곡선을 얻었지만, Pt/Ti $O_{x}$ 전극을 사용한 SBT 박막은 $700^{\circ}C$에서 열처리하였을 때 이력곡선이 관찰되었다. Ir $O_2$전극을 사용한 SBT 박막은 $700^{\circ}C$의 열처리에서 8.79 $\mu$C/$ extrm{cm}^2$ (3V)의 2Pr 값을 나타내었다.나타내었다.다.

  • PDF