• The Journal of Korean Institute of Communications and Information Sciences
• /
• v.35 no.9B
• /
• pp.1342-1349
• /
• 2010

Full-mesh IPSec tunnels, which constitute a black network, are required so that the dynamically changing PT (Plain Text) networks can be reachable across the black network in military environments. In the secure and mobile black networks, dynamically re-configuring IPSec tunnels and security policy database (SPD) is very difficult to manage. In this paper, for the purpose of solving mobility and security issues in military networks, we suggest the relating main technologies in association with DMIDP (Dynamic Multicast-based IPSec Discovery Protocol) based on existing IPSec ESP (Encapsulating Security Payload) tunnels and IPSec key managements. We investigate the main parameters of the proposed DMIDP techniques and their operational schemes which have effects on mobility and analyze operational effectivemess of the DMIDP with proposed parameters.

• Journal of the Korea Institute of Information Security & Cryptology
• /
• v.31 no.6
• /
• pp.1237-1246
• /
• 2021

This paper is about Asynchronous Transfer Mode (ATM) cell security in which an Output Feedback (OFB) mode is applied to an AES block ciphers. ATM cells are divided into user data cells and maintenance cells, and each cell is 53 octets in size and consists of a header of 5 octets and a payload of 48 octets. In order to encrypt/decrypt ATM cells, the boundaries of cells must be detected, which is possible using the Header Error Control (HEC) field in the header. After detecting the boundary of the cell, the type of payload is detected using a payload type (PT) code to encrypt only the user cell. In this paper, a security method for ATM cells that satisfies the requirements of ISO 9160 is presented.

• Clean Technology
• /
• v.21 no.3
• /
• pp.184-190
• /
• 2015

Most of LNT catalysts use noble metals such as Pt for low temperature NO_x oxidation but there is an economic weakness. For the purpose of overcoming this, this study is to develop DeNO_x catalyst for LNT excluding PGM (platinum group metal) such as Pt, Pd, Rh, etc. To do so, Al/Co/Ni catalyst selected as a preliminary test is used to study fundamental property and NO_x’s conversion according to calcined temperature. Ultimately, that is, Al/Co/Ni mixed metal oxide which does not use PGM is selected and physicochemical characterization is performed by way of XRD, EDS, SEM, BET and ramp test and NO_x conversion is also analyzed. This study shows that all samples consist of mixed oxides of spinel structure of Co₂AlO₄ and NiAl₂O₄ and have enough pore volume and size for redox. But as a result of NH₃-TPD test, it is desired that calcined temperature needs to be maintained at 700 ℃ or lower. Also only samples which are processed under 500 ℃ satisfied NO and NO_x conversion simultaneously through ramp test. Based on this study’s results, optimum calcined temperature for Al/Co/Ni=1.0/2.5/0.3 mixed metal oxide catalyst is 500 ℃.

• Applied Chemistry for Engineering
• /
• v.25 no.4
• /
• pp.409-413
• /
• 2014

This study was carried out to design the optimum mixing ratio of aggregate, cyclic aggregate, and binder (moisture, emulsified asphalt, and emulsion type additives) and produce recycling cold asphalt paving mixture satisfying site work standard. The cyclic aggregate satisfying KS F 2572 was collected from waste asphalt by adequate processing. As the moisture content increased, the shearing strength was decreased. The maximum marshall stability was shown at the 3.0 wt% moisture content. So the optimum moisture content was 3.0 wt%. The marshall stability and flow value with the amount of emulsified asphalt was satisfied in the range of 0.5~2.5 wt%, and the porosity was satisfied in the range of 0.7~2.5 wt%. So the optimum amount of emulsified asphalt was 1.6 wt%. The optimum amount of emulsion type additive was 0.1 wt% in the light of marshall stability and degree of saturation of recycling cold asphalt mixture.

• Journal of Chest Surgery
• /
• v.29 no.9
• /
• pp.971-976
• /
• 1996

From March 1988 to October 1992, 201 CarboMedics cardiac valve prostheses (150 mitral, 50 aortic and 1 tricuspid) were implanted in 166 consecutive patients (mean age 38 years, male/female 66/100) by one surgical team operating on adult cardiac patients at Kyungpook University Hospital. Total follow up represen:toed 6646 patient-months (mean 40mon1hs) and follow up rate was 96%. One hundred and twenty-four patients (74.7 %) were in NYHA functional class 111 or tV preoperatively and 164 patients (98.7 %) were in class I or ll postoperatively. Hospital mortality was 4.2 % and late death was 4.2%. The actuarial survival at 78 months was 89.4%. The linearized incidence of valve related death, prosthetic valve thrombosis, anticoagulant related hemorrhage, non-structural dysfunction and reoperation was 0.72%/pt-yr, 0.18%/pt-yr, 0.18%trapt-yr, 0.18 %/pt-yr and 0. 36%/pt-yr respective y. The 78 month rates of freedom from valve related death, prosthetic valve thrombosis, anticoagulant related hemorrhage, non-structural dysfunction and reoperation were 94.9%, 99.4%, 99.4%, 98.6 % and 97.9 % respectivly. The 78 month rate of freedom from all valve related complications and deaths including hospital mortality was 90.9%. These fact suggest that the CarboMedics cardiac valve has execellent result, low incidence of valve-ie-lated complications and no structural deterioration, and long term follow up study is necessary.

• Journal of the Korean Society of Food Science and Nutrition
• /
• v.11 no.3
• /
• pp.81-86
• /
• 1982

Ginseng saponins separated from Panax ginseng C.A. Meyer were analyzed by high-performance liquid chromatography using a carbohydrate analysis column. The effect on the resolution and retention time of each ginsenosides, as well as the addition effect of n-butanol on a acetonitrile/water system, was examined using various proportions of acetonitrile/water system (80/20-94/6) which have been used with typical solvent of carbohydrate analysis column. The retention time of each ginsenosides was greatly affected by the compositions and mixture proportions of the mobile phase and also markedly increased as the proprotion of acetonitrile in mobile phase increased. It was proved that acetonitrile/water system (80/20) and acetonitrile/water/n-butanol system (86/14/10) were very effective mobile phases for diol and triol sapoin analyses, respectively. According to the result obtained by this method, the PT/PD ratios of white and red ginseng saponins were 0.401 % and 0.561 %, respectively. Red ginseng increased PT/PD ratio, compared with white ginseng. This is attributed to the change of saponin pattern by processing method and the change of PT/PD ratio would greatly influence on the biochemical and pharmacological effects of ginseng and its products.

• Proceeding of EDISON Challenge
• /
• 2016.03a
• /
• pp.330-332
• /
• 2016

수소 발생 반응 촉매는 주로 백금(Pt)족 물질로 만들어져왔으나, 그 높은 가격과 희귀성으로 인해 이를 대체할 촉매의 개발이 요구되고 있다. 그중에서 주목받는 물질이 판상 $MoS_2$인데, 순물질로써의 $MoS_2$는 오직 모서리 부분만이 촉매로 기능하며 표면은 안정하여 촉매로써 기능을 하지 못한다는 한계가 있었다. 따라서 $MoS_2$의 표면도 촉매로 기능하여 보다 효율적인 촉매가 될 수 있도록, 자연계에 비교적 풍부한 원소들로 Mo원자를 치환해 보고 평면 스트레인을 줌으로써 표면이 촉매로 기능할 수 있는 조건을 밀도 범함수 이론에 근거해 계산해 보았다. 그 결과, Ge로 치환되고 -10% 스트레인이 걸린 $MoS_2$의 표면이 촉매로 기능할 수 있는 조건을 만족시켰다. 한편 Ge로 치환된 샘플에 수소를 흡착시켰을 때, 치환된 원자와 수소 원자가 반발력을 나타내는 듯한 현상이 관찰되었다.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.19 no.5
• /
• pp.167-175
• /
• 2018

Load transfer experiments have been carried out to evaluate the performance of the anchorage and it has been stated that the specimens were manufactured and tested according to ETAG 013. On the other hand, the amount of spiral reinforcement and auxiliary reinforcement exceeded the amount specified in ETAG 013. In this study, the load transfer test method and the criteria specified in ETAG 013 were considered and the PT anchorage system was applied to manufacture specimens with high strength concrete and a high tensile prestressing strand. A load transfer test according to ETAG 013 was performed to evaluate the performance of the circular anchorage. As a result, it was confirmed that ETAG 013 is a very strict specification that does not satisfy the performance of an anchorage unless the specimens of an appropriate size and spiral reinforcement are used. To assess the stability of the specimens, increasing the size of the specimen by 15%, rather than increasing the amount of auxiliary reinforcement, is considered to be the correct method in accordance with ETAG 013.

• Journal of radiological science and technology
• /
• v.39 no.4
• /
• pp.577-585
• /
• 2016

The purpose of this study is to evaluate the accuracy of beam delivery QA software using the MLC dynalog file, about the VMAT plan with AAPM TG-119 protocol. The Clinac iX with a built-in 120 MLC was used to acquire the MLC dynalog file be imported in MobiusFx(MFX). To establish VMAT plan, Oncentra RTP system was used target and organ structures were contoured in Im'RT phantom. For evaluation of dose distribution was evaluated by using gamma index, and the point dose was evaluated by using the CC13 ion chamber in Im'RT phantom. For the evaluation of point dose, the mean of relative error between measured and calculated value was $1.41{\pm}0.92%$(Target) and $0.89{\pm}0.86%$(OAR), the confidence limit were 3.21(96.79%, Target) and 2.58(97.42%, OAR). For the evaluation of dose distribution, in case of $Delta^{4PT}$, the average percentage of passing rate were $99.78{\pm}0.2%$(3%/3 mm), $96.86{\pm}1.76%$(2%/2 mm). In case of MFX, the average percentage of passing rate were $99.90{\pm}0.14%$(3%/3 mm), $97.98{\pm}1.97%$(2%/2 mm), the confidence limits(CL) were in case of $Delta^{4PT}$ 0.62(99.38%, 3%/3 mm), 6.6(93.4%, 2%/2 mm), in case of MFX, 0.38(99.62%, 3%/3 mm), 5.88(94.12%, 2%/2 mm). In this study, we performed VMAT QA method using dynamic MLC log file compare to binary diode array chamber. All analyzed results were satisfied with acceptance criteria based on TG-119 protocol.

• Proceedings of the Korean Vacuum Society Conference
• /
• 2000.02a
• /
• pp.113-113
• /
• 2000

직접천이형 wide band gap(3.4eV) 반도체중의 하나인 GaN를 청색 및 자외선 laser diode, 고출력 전자장비 등으로 응용하기 위해서는 낮은 접합저항을 갖는 Ohmic contact이 선행되어야 한다. 그러나 만족할만한 p-type GaN의 Ohmic contact은 아직 실현되고 있지 못하며, 이는 GaN와 접합 금속과의 구체적인 반응의 연구를 필요로 한다. 본 연구에서 앞서 Pt, Pt, Ni등의 late transition metal을 p-GaN에 접합시킨 결과 이들은 접합 당시 비교적 평탄하나 후열 처리과정에서 비교적 낮은 온도에서 기판과 열팽창계수의 차이로 인하여 평탄성을 잃어버리면서 barrier height가 증가한다는 사실을 확인하였다. 따라서 본 연구에서는 이러한 열적 불안정성을 극복하기 위하여 Ni과 Pd를 차례로 증착하고 가열하면서 interfacial reaction, film morphology, Fermi level의 움직임을 monchromatic XPS(x-ray photoelectron spectroscopy) 와 SAM(scanning Auger microscopy) 그리고 ex-situ AFM을 이용하여 밝히고자 하였다. 특히 후열처리에 의한 계면 반응에 수반되는 구성 금속원소 간의 합금현상과 금속 층의 평탄성이 밀접한 관계가 있다는 것을 확인하였다. 이러한 합금과정에서 나타나는 금속원소들의 중심 준위의 이동을 체계적으로 규명하기 위해서 Pd1-xNix와 Pd1-xGax 합금들의 표준시료를 arc melting method로 만들어 농도에 따른 금속원소들의 중심 준위의 이동을 측정하여, Pd/Ni/p-GaN 및 Ni/Pd/p-GaN 계에서 열처리 온도에 따른 interfacial reaction을 확인하였다. 그 결과 두 계가 상온에서 nitride 및 alloy를 형성하지 않고 고르게 증착되고, 열처리 온도를 40$0^{\circ}C$에서 $650^{\circ}C$까지 증가시킴에 따라 계면반응의 부산물인 metallic Ga은 증가하고 있으마 nitride는 여전히 형성되지 않는 것을 확인하였다. 증착당시 Ni이 계면에 있는 Pd/Ni/p-GaN의 경우에는 52$0^{\circ}C$까지의 열처리에 의하여 Ni과 Pd가 골고루 섞이고 그 평탄성도 유지되고 barier height의 변화도 없었다. 더 높은 $650^{\circ}C$ 가열에 의해서는 surface free energy가 작은 Ga의 활발한 편석 현상으로 인해 표면은 Ga이 풍부한 Pd-Ga의 합금층으로 덮이고, 동시에 작은 pinhole들이 발생하며 barrier height도 0.3eV 가량 증가하게 된다. 반면에 증착당시 Pd이 계면에 있는 Ni/Pd/p-GaN의 경우에는 40$0^{\circ}C$의 가열까지는 두 금속이 그들 계면에서부터 섞이나, 52$0^{\circ}C$의 가열에 의해 이미 barrier height가 0.2eV 가량 증가하기 시작하였다. 더 높은 $650^{\circ}C$가열에 의해서는 커다란 pinhole, 0.5eV 가량의 barrier height 증가, Pd clustering이 동시에 관찰되었다. 따라서 Ni과 Pd의 일함수는 물론 thermal expansion coefficient가 거의 같으며 surface free energy도 거의 일치한다는 점을 감안하면, 이렇게 뚜렷한 열적 안정성의 차이는 GaN와 contact metal과의 반응시작 온도(disruption onset temperature)의 차이에 기인함을 알 수 있었다. 즉 계면에서의 반응에 의해 편석되는 Ga에 의해 박막의 strain이 이완되면, pinhole 등의 박막결함이 줄어 들고, 이는 계면의 N의 out-diffusion을 방지하여 p-type GaN의 barrier height 증가를 막게 된다.