• Proceedings of the KIEE Conference
• /
• 1994.07a
• /
• pp.310-312
• /
• 1994

A partial shunt regulator (PSR) which is the power regulator of KOREASAT is modeled. The modeling of the PSR consist of solar array, power circuit, controller. and load models. To realize simple structure. a voltage source of the PSR controller is used the output voltage of the PSR. The model of the PSR has very complex structure with two additional coupled feedback loops. The complex model is simplified to a simple meaningful model with only main feedback control loop. The proposed model is compared to a PSR model with DC voltage source at the PSR controller. The proposed PSR model is verified by comparing the model with SPICE simulation for small signal analysis.

• Journal of Mechanical Science and Technology
• /
• v.15 no.1
• /
• pp.88-97
• /
• 2001

The present study numerically investigates the fuel-air mixing characteristics, flame structure, and pollutant emission inside a double-swirler combustor. A PSR(Perfectly Stirred Reactor) based microstructural model is employed to account for the effects of finite rate chemistry on the flame structure and NO formation. The turbulent combustion model is extended to nonadiabatic flame condition with radiation by introducing an enthalpy variable, and the radiative heat loss is calculated by a local, geometry-independent model. The effects of turbulent fluctuation are taken into account by the joint assumed PDFs. Numerical model is based on the non-orthogonal body-fitted coordinate system and the pressure/velocity coupling is handled by PISO algorithm in context with the finite volume formulation. The present PSR-based turbulent combustion model has been applied to analyze the highly intense turbulent nonpremixed flame field in the double swirler combustor. The detailed discussions were made for the flow structure, combustion effects on flow structure, flame structure, and emission characteristics in the highly intense turbulent swirling flame of the double swirler burner.

• Journal of Welding and Joining
• /
• v.17 no.2
• /
• pp.61-65
• /
• 1999

Because of the need for packages which accommodate high pin count, high density and high speed device, PBGA(plastic ball grid array) package gets more spotlight. But the substrate material which is used for PBGA package is in nature susceptible to moisture penetration. The objective of the study is to find out the path of delamination in the stacked structure of substrate. To increase the adhesion between the cooper laminate and PSR(photo solder resist) which is the weakest part, experiments were performed by changing parameters of printing pre-treatment and post-treatment process. As a result of experiments, the factor effects on the adhesion between the cooper laminate and PSR is caused by all of the pre-treatment and post-treatment condition. A considerable change was observed depending on the amount of UV irradiation after thermal cure which is typical of printing post-treatment condition rather than pre-treatment condition.

• Korean Management Science Review
• /
• v.28 no.3
• /
• pp.61-72
• /
• 2011

This study suggests a DEA(Data Envelopment Analysis) based model to evaluate the value of corporate stock. The model integrating PER(Price-Earning Ratio), PBR(Price-BookValue Ratio), PSR(Price-Sales Ratio) and volatility in DEA structure has an advantage of overcome the limitation of traditional financial ratio based models. In order to show the effectiveness of the suggested model. we compare the performance of portfolio composed by DEA approach with those of portfolios made by traditional approaches such as PER, PBR, and PSR in terms of stock return and volatility. Specifically, we use the data of all the enterprises listed on the S&P 500 in the U.S. in 2007 and 2009 as the sample data for the experiments. The results of the experiments show that the performance of the DEA approach is clearly better than those of other approaches. Particularly, in sharply plummeting market, the performance of the DEA approach is shown to be prominently better than those of other approaches as the DEA approach reflects investment risk as well as profitability and growth. The DEA score combining the existing investment indices may serve as a useful barometer for selecting a stable and profitable portfolio.

• The Transactions of the Korean Institute of Power Electronics
• /
• v.28 no.1
• /
• pp.30-38
• /
• 2023

In this paper, a constant current(CC) and constant voltage(CV) control method using a primary-side regulated(PSR) fly-buck converter is proposed. Because the primary-side structure of the fly-buck converter is the same as that of the synchronous buck converter, it always operates in continuous conduction mode(CCM). Therefore, in the proposed method, the load information on the secondary side can always be easily estimated by measuring the primary inductor current at the midpoint of the switch-on period. An accurate CC/CV control can be achieved through simple calculations based on this estimated information. Consequently, the proposed method is advantageous for optimizing the control performance of the PSR converter. The validity of the proposed control was verified using a 5 W prototype of a PSR fly-buck converter. The experimental results confirmed that the current reference of 500 mA was followed within the error range of 1.2%, and that the voltage reference of 12 V was followed within the error range of 1.8% despite the indirect control of the load current and output voltage from the primary side.

• Journal of the Korean Data and Information Science Society
• /
• v.10 no.2
• /
• pp.369-385
• /
• 1999

For the growth curve model with arbitrary covariance structure, known as unstructured covariance matrix, the problems of detecting outliers are discussed in this paper. In order to detect outliers in the growth curve model, the likelihood ratio testing statistics in mean shift model is established and its distribution is derived. After we detected outliers in growth curve model, we test homo and/or hetero-geneous covariance matrices using PSR Quasi-Bayes Criterion. For illustration, one numerical example is discussed, which compares between before and after outlier deleting.

• Journal of the Korean Data and Information Science Society
• /
• v.14 no.2
• /
• pp.313-323
• /
• 2003

For the growth curve model with arbitrary covariance structure, known as unstructured covariance matrix, the problems of detecting outliers are discussed in this paper. In order to detect outliers in the growth curve model, the test statistics using U-distribution is established. After detecting outliers in growth curve model, we test homo and/or hetero-geneous covariance matrices using PSR Quasi-Bayes Criterion. For illustration, one numerical example is discussed, which compares between before and after outlier deleting.

• Journal of Korea Water Resources Association
• /
• v.52 no.10
• /
• pp.729-742
• /
• 2019

Natural disasters such as floods has been increased in many parts of the world, also Korea is no exception. The biggest part of natural damage in South Korea was caused by the flooding during the rainy season in every summer. The existing flood vulnerability analysis cannot explain the reality because of the repeated changes in topography. Therefore, it is necessary to calculate a new flood vulnerability index in accordance with the changed terrain and socio-economic environment. The priority of the investment for the flood prevention and mitigation has to be determined using the new flood vulnerability index. Total 25 urban districts in Seoul were selected as the study area. Flood vulnerability factors were developed using Pressure-State-Response (PSR) structures. The Pressure Index (PI) includes nine factors such as population density and number of vehicles, and so on. Four factors such as damage of public facilities, etc. for the Status Index (SI) were selected. Finally, seven factors for Response Index (RI) were selected such as the number of evacuation facilities and financial independence, etc. The weights of factors were calculated using AHP method and Fuzzy AHP to implement the uncertainties in the decision making process. As a result, PI and RI were changed, but the ranks in PI and RI were not be changed significantly. However, SI were changed significanlty in terms of the weight method. Flood vulnerability index using Fuzzy AHP shows less vulnerability index in Southern part of Han river. This would be the reason that cost of flood mitigation, number of government workers and Financial self-reliance are high.

• Proceedings of the Korean Society of Crop Science Conference
• /
• 2022.10a
• /
• pp.202-202
• /
• 2022

Recently days, soybean production in paddy field is increasing, from 4,422 ha in 2016 to 10,658 ha in 2021 in Korea. It is easy for Phytophthora stem and root rot (PSR) occurring in paddy field condition, when it is poorly drained soils with a high clay content, and temporary flooding and ponding. Therefore PSR resistant soybean cultivar is required. The objective of this study is to identify QTL region and candidate genes relating to PSR resistance of the race in main soybean cultivation area in Korea. 210 soybean materials including cultivars and germplasm were used for inoculation and genome-wide association study (GWAS). Inoculation was conducted using stem-scar method with 2 replications in 2-year for the race 3053 from Kimje and 3617 from Andong. 210 materials were genotyped with Soya SNP 180K chip, and structure analysis and association mapping were conducted with QTLMAX V2. The results of inoculation showed that survival ratio ranged from 0% to 96.7% and mean 9.7% for 3053 and ranged from 0% to 100% and mean 7.6% for 3617. Structure analysis showed linkage disequillibrium (LD) was decayed below r²=0.5 at 335kb of SNP distance. Significant SNPs (LOD>7.0) were identified in Chr 1, 2, 3, 4, 5, 11, 14, 15 for 3053 and Chr 1, 2, 3, 7, 10, 14 for 3617. Especially, LD blocks (AX-90455181;15,056,628bp~AX-90475572;15,298,872bp) in Chr 2 for 3053 and 3067 were duplicated. 29 genes were identified on these genetic regions including Glyma.02gl47000 relating to ribosome recycling factor and defense response to fungus in Soybase.

• Journal of Powder Materials
• /
• v.13 no.1 s.54
• /
• pp.39-45
• /
• 2006

The $Al/SiC_p$ particle reinforced composite fabricated by a powder-in sheath rolling (PSR) method was severely. deformed by the accumulative roll-bonding (ARB) process. The ARB process was performed up to 8 cycles at ambient temperature without lubricant. The ARBed composite exhibited an ulbricant. grained structure similar to the other ARBed bulky materials. Tensile strength of the composite increased gradually with the number of ARB cycles, but from the 6th cycle it rather decreased slightly. These characteristics of the composite were somewhat different from those of Al powder compact fabricated by the same procedures. The difference in microstructure and mechanical properties between Al powder compact and the composite was discussed.