• 제목/요약/키워드: PSAM

검색결과 37건 처리시간 0.022초

OFDM 시스템을 위한 LMMSE 채널추정기법의 성능 개선 (Performance Improvement of LMMSE Channel Estimation Method for OFDM Systems)

  • 강연석;김영수;서덕영;김진상
    • 한국통신학회논문지
    • /
    • 제30권2A호
    • /
    • pp.43-50
    • /
    • 2005
  • 본 논문에서는 Orthogonal frequency division multiplexting(OFDM) 시스템의 성능 향상을 위해 파일럿 심볼을 이용한 향상된 채널추정 알고리즘을 제안한다. 기존의 LMMSE 알고리즘을 이용한 채널추정 방법은 파일럿 심볼만을 채널추정에 이용함으로써 파일럿 심볼 간격이 멀어짐에 따라 성능이 현저하게 떨어지는 단점이 있다. 이런 문제를 해결하기 위해 파일럿 심볼 사이의 채널을 선 추정하고 이 추정된 값을 다시 파일럿 심볼과 함께 이용하여 채널을 추정하는 채널추정기법을 제안하였다. 제안된 추정기법은 도플러 주파수가 36Hz에서 185Hz인 페이딩 채널환경에 적용했다. 기존의 LMMSE 추정기법과 비교했을 때 특히 큰 도플러 주파수에 대해 강건한 특성을 보였다.

SDR Based Modulation Performance of RF Signal under Different Communication Channel

  • Shabana Habib
    • International Journal of Computer Science & Network Security
    • /
    • 제24권3호
    • /
    • pp.182-188
    • /
    • 2024
  • Hardware components are an integral part of Hardware Define Radio (HDR) for seamless operations and optimal performance. On the other hand, Software Define Radio (SDR) is a program that does not rely on any hardware components for its performance. Both of the latter radio programmers utilize modulation functions to make their core components from signal processing viewpoint. The following paper concentrates on SDR based modulation and their performance under different modulations. The bit error rate (BER) of modulations such as PSK, QAM, and PSAM were used as indicators to test channel quality estimation in planar Rayleigh fading. Though it is not commonly used for channel fading, the method of the adder determines the regionally segmented channel fading. Thus, the estimation error of the channel change substantially reduces the performance of the signal, hence, proving to be an effective option. Moreover, this paper also elaborates that BER is calculated as a function of the sample size (signal length) with an average of 20 decibels. Consequently, the size of the results for different modulation schemes has been explored. The analytical results through derivations have been verified through computer simulation. The results focused on parameters of amplitude estimation error for 1dB reduction in the average signal-to-noise ratio, while the combined amplitude deviation estimation error results are obtained for a 3.5 dB reduction

동시전송 감쇠 채널에서 다중반송파 16QAM 시스템의 설계 및 성능분석 (Design and Performance Analysis of Multicarrier 16QAM System in Simulcast Fading Channel)

  • 김경덕;이창재;황성현;최형진
    • 대한전자공학회논문지TC
    • /
    • 제37권10호
    • /
    • pp.26-36
    • /
    • 2000
  • 이 논문에서는 고속전송 무선호출 시스템을 위한 스펙트럼 비중첩형 다중반송파 변복조 시스템을 설계하고 모의수행을 통하여 시스템의 성능을 평가한다. 기존의 무선호출 시스템은 주로 FSK 변조 방식이었으나 차세대방식에서는 계속 채용되기 어려우므로 대역효율이 높아 고속전송에 유리한 QAM 방식을 채택한다. 송신단은 iDEN/sup TM/의 4-16QAM 구조를 채택하였으며, 복조 알고리즘은 자동이득제어, 반송파동기 및 심벌동기를 고려한다. 한편, 동시전송 감쇠 채널을 극복할 수 있는 파일럿 심벌 보상 기술에 대해 분석하고 최적 파일럿 심벌 구조를 새롭게 제안하며 마지막으로 전체 4-16QAM 시스템의 성능평가 결과를 제시하였다.

  • PDF

유동가압성형(TPM)을 이용한 휴대용 유도무기용 연소관 조립체 제작공정연구 (A study on the manufacturing of motor case assembly for K-PSAM propulsion system by Trans. power molding(TPM) process)

  • 정상기;윤남균
    • 한국추진공학회지
    • /
    • 제2권3호
    • /
    • pp.107-115
    • /
    • 1998
  • 복합재료와 금속 튜브 사이의 좁고 긴 원통형 공간을 EPDM(Ethylene propylene dien ter polymer)으로 충전하는 연구를 수행하였다. 휴대용 유도무기의 추진기관을 개발하기 위하여 소형 연소관 조립체를 설계하고 제작하였다. 연소관 조립체는 연소관 금속튜브, 연소관 내열재, 그리고 연소관 단열재로 이루어져 있는데 연소관 내열재는 탄소/페놀릭을 사용하여 롤링 공법으로 제작하였으며 연소관 단열재는 EPDM을 사용하여 TPM 공법으로 제작하였다. EPDM의 조성 선정을 위하여 내열 삭마특성, 열분해특성 실험을 수행하였으며 흐름성, 접착성, 경도측정 등을 통하여 최종 조성을 결정하였다. 연소관 조립체를 제작하기 위한 EPDM 충전을 위하여 TPM 공법을 설계하고 금형과 치구를 제작하였다. 충전된 연소관 조립체는 비파괴검사를 통하여 접착, 기공 등을 검사하여 최종 선정되었다.

  • PDF

휴대용 유도탄 체계의 모델링과 성능분석을 위한 실시간 병렬처리 시뮬레이터 (Real-time Parallel Processing Simulator for Modeling Portable Missile System and Performance Analysis)

  • 김병문;정순기
    • 한국컴퓨터정보학회논문지
    • /
    • 제11권4호
    • /
    • pp.35-45
    • /
    • 2006
  • 본 논문에서는 휴대용 회전 유도탄 체계의 모델링과 성능분석에 사용할 수 있는 실시간 병렬처리 시뮬레이터 개발에 대하여 기술한다. 실시간 병렬처리 시뮬레이터는 항공기의 적외선 형상을 만드는 탐색기 에뮬레이터, 실시간 컴퓨터, 시스템 유닛. 유도 조종 장치 및 탐색기 프로세서 등과 같은 하드웨어 실물장치와 실시간 컴퓨터에 내장된 수학적 모델, 6 자유도 모델 및 공력 모델 등을 구현한 응용 소프트웨어 및 호스트 컴퓨터에 내장된 사용자 프로그램 등으로 구성되었다. 실시간 컴퓨터는 병렬로 연결된 여섯 개의 TI사 C-40 프로세서로 설계되었으며, 기계적 장치와 결합된 아날로그 전자회로를 이용하여 탐색기 에뮬레이터를 설계하였다. 시스템 유닛은 구성 요소간의 임피던스 정합 기능과 미세 신호를 처리하며, 시뮬레이터와 실물 유도탄 발사 장치의 연결이 가능하다. 개발된 실시간 병렬처리 시뮬레이터를 휴대용 회전 유도탄의 성능분석 장치로 사용하기 위하여 현장실험을 통한 결과 검증시험을 수행하였다.

  • PDF

하이패스플러스카드 시험 모듈 개발 (Developing the Test Module of $Hipass^{PLUS}$ Card)

  • 이기한;이대규;여운상;이승환
    • 한국ITS학회 논문지
    • /
    • 제2권2호
    • /
    • pp.31-42
    • /
    • 2003
  • 한국도로공사의 선불형 플라스틱카드는 사용자 측면이나 관리 측면에서 많은 문제를 야기하고 있다. 스마트카드 형태의 선불형 전자지불카드인 하이패스플러스하드는 기존 카드의 문제점들을 극복하고 현재 교통분야에 적용된 스마트카드등과의 효율적인 연계가 가능하다 하이패스플러스카드는 가치 저장 및 가지 지불에 사용되는 카드이다. 따라서, 하이패스플러스하드의 기능 및 보안이 철저해야 한국도로공사의 전자지불시스템이 안전하다. 본 논문은 하이패스플러스카드에 LSAM으로부터 가치를 저장받기위한 기능 및 보안 시험과 하이패스플러스카드로부터 PSAM에 가치를 지불하기 위한 기능 및 보안성을 시험하기 위한 시험 방법, 시험 표준항목, 그리고 시험 절차 등을 포함한 시험 모듈을 개발했다. 하이패스 플러스하드의 시험 표준항목은 한국도로공사 규격서에 준하여 ISO 표준에 적합한 시험 항목으로 선정했으며, 시험 검사표는 시험 표준항목을 검사할 수 있는 기준에 의해서 작성했다. 시험 모듈은 시험 검사표에 의한 시험 표준항목을 시험할 수 있는 방법 및 절차를 따라서 개발했다 시험은 한국도로공사에서 사용되는 하이패스플러스카드를 이용하여 실행하였다. 본 시험 모듈은 하이패스플러스하드의 기능뿐 아니라 보안성 및 적합성을 시험하였다. 시험 결과에 의하면 현재 사용중인 하이패스플러스카드의 보안성 및 기능은 기준을 통과하였으며, 보안 및 기능에 문제가 없다는 것이 입증되었다.

  • PDF

PET Imaging of Click-engineered PSMA-targeting Immune Cells in Normal Mice

  • Hye Won Kim;Won Chang Lee;In Ho Song;Hyun Soo Park;Sang Eun Kim
    • 대한방사성의약품학회지
    • /
    • 제8권2호
    • /
    • pp.53-61
    • /
    • 2022
  • This study aimed to increase the targeting ability against PSMA in cell therapy using metabolic glycoengineering and biorthogonal chemistry and to visualize cell trafficking using PET imaging. Cellular membranes of THP-1 cells were decorated with azide(-N3) using Ac4ManNAz by metabolic glycoengineering. Engineered THP-1 cells were conjugated with DBCO-bearing fluorophore (ADIBO-Cy5.5) for 1 h at different concentrations and analyzed by confocal fluorescence microscopy and flow cytometry. For PSAM ligand conjugation to THP-1 cells, Ac4ManNAz treated THP-1 cells were incubated with DBCO-PSMA ligand (ADIBO-GUL) at a final concentration with 100 µM for 1 h. To evaluate the effect on cell recognition, PSMA ligand conjugated THP-1 cells(as effectors) were co-cultured with PSMA positive 22RV1 (as target cells) at 3 : 1 a effector-to-target cell (E/T) ratio. The interaction between THP-1 and 22RV1 was monitored by confocal fluorescence microscopy. For preparing the radiolabeled THP-1, the cells were treated at the activity of ~ 740 kBq of [89Zr]Zr(oxinate)4/5 × 106 cells. Radiolabeled cells were analyzed for determination of cell-associated radioactivity by gamma counting and viability using MTS assay. In the cytotoxicity assay, THP-1 cells did not have any cytotoxicity even when the Ac4ManNAz concentration was 100 µM. In confocal microscopy and flow cytometry, THP-1 cells were efficiently labeled ADIBO-Cy5.5 in a dose-dependent manner, and the dose of 100 µM was the optimal concentration for the following experiments. The clusters of PSMA ligand-conjugated THP-1 cells and 22RV1 cells were identified, indicating cell-cell recognition over the cell surface between two types of cells. Cell radiolabeling efficiency was 54.5 ± 17.8%. THP-1 labeled with 0.09 ± 0.03 Bq/cell showed no significant cytotoxicity compared to unlabeled THP-1 up to 7 days. We successfully demonstrated that Ac4ManNAz treated cells were efficiently conjugated with ADIBO-GUL for preparing the PSMA-targeting cells, and [89Zr]Zr(oxinate)4 could be used to label cells without toxicity. It suggested that PSMA-ligand conjugated cell therapy could be improved cell targeting and be monitored by PET imaging.