• Journal of Animal Science and Technology
• /
• v.46 no.1
• /
• pp.83-90
• /
• 2004

Processed meals, such as a ground meat and hamburger patty, are required to ensure that no pathogens remain in the final products. However, there was no rapid method available to verify that the recommended end-point cooking temperature(EPT) was reached. Thus, the objective of this study was to rapidly determine EPT of ground pork hams using sodium dodecyl sulfate-polyacrylamide gel electrophoresis(SOS-PAGE), based on the disappearance of sarcoplasmic proteins after cooking. Fresh pork hams were added two levels of salt(0, 2%) and fat(15, 25%) combinations, and stored in refrigerator overnight, and cooked to internal cooking temperatures of $64^{\circ}C$ to $74^{\circ}C$ with $2^{\circ}C$ increments. Cooked pork hams were measured cooking loss(CL, %), protein solubility(PS) and SOS-PAGE. CL(%) was reduced with the addition of 2% salt, as compared to the control, regardless of fat contents. It was also increased with increasing eooking temperature. Protein solubility was affected by the cooking temperature, resulting in reduced PS up to $64^{\circ}C$(P < 0.05), but remained constant higher than $68^{\circ}C$. In SOS-PAGE analysis, protein bands with the molecular weights of 36 and 66 kDa were affected by the addition of salt and fat combinations. regardless of treatments. These protein fractions were decreased gradually with increased cooking temperatures up to $68^{\circ}C$ ${\sim}$ $70^{\circ}C$ and might be good indicators for the determination of EPT in ground pork hams.

• Journal of Biosystems Engineering
• /
• v.2 no.1
• /
• pp.7-24
• /
• 1977

This paper is the forth and fifth one of the study on balanced type oscillating mole drainer. In the light of the results from previous reports about the model tests, some design criteria were established and a prototype machine was set up for experimental purpose. Motion characteristics and functionof the each parts of the machine were checked and analyzed. After that, performance tests of the prototype machine were carried out in thefield. Obtained results are summarized as follows ; 1. Ten centimeter of the bullet diameter was determined so as to be able to attach it to the tractors with capacity of 30 PS to 40 PS. 2. To maintain the balance between the moments of the front shank and rear shank, the oscillating amplitude of the rear bullet was determined to be larger than that of the front bullet. At the same time , the oscillating direction of the rear bullet was designed with the inclines of ten to thirty degrees. 3. An octagonal dynamo transduced was developed for measuring the compressive force of the upper link is measuring the draft force of the machine. Acceptable linear relationship between forces and strain responses from O.D.T. was obtained. 4. Analysing the balancing mechanism of the acting part of the machine , it was found that the total draft force of the machine was equal to the difference between the sum of the draft force produced from the right and left side bending moments of the lower drawber and the compressive force on the upper link. 5. There are acceptable linear relationship between the strain and twisting moment by driving shaft, and between strain and shank moment. Above results enable us to carry out the field experiment with prototype machine. 6. When the test machine was used in the field, it was possible to reduce the oscillating acceleration by forty percent in average as compared it with the single bullet mole drainer. 7. When the test machine was used under the oscillating condition, the dratt torce was reduced by 27 percent to 59 percent as compared it with the test machine under non-oscillating condition, while the draft force was increased by 7 percent to 20 percent as compared it with the mole drainer having oscillating single bullet. The reasoning behind this fact was considered as the resistance force due to the rear shank and bullet. 8. As the amplitude and frequency of the bullet were increased, the torque was increased accordingly. This tendency could be varied with the various characteristics of the given soils. And the larger frequency and amplitute, the more increasing oscil\ulcornerlating power but decreasing draft brce were needed, and draft force was increased as the velocity was increased.9. When the amplitude of the rear bullet was designed to be larger than that of the front bullet, the minimum value of the moment was lowered and oscillating acceleration was reduced. And when the oscillating direction of the rear bullet was declined back\ulcornerwards, oscillating acceleration was increased along with the increasing angle of decli\ulcornernation. When the test machine was operated in high speed, the difference between maximum moments and minimum ones became narrow. This varying magnitude of moments appeared on the moment oscillogram seems to be correlated to the oscillating acceleration and draft force. 10. From the analysis of variance, it was found that those factors such as frequency, amplitude, and operating velocity significantly affected in the oscillating acceleration, the draft resistance, the torque, the moment, and the total power required. And interaction between frequency and amplitude affected in the oscillating acceleration. 11. Within the given situation of this study, the most preferable operating conditions of the test machine were 7 Hz in oscillating frequency, 0.54 m/sec in operating velocity, and 39.1 mm in oscillating amplitude of front and rear bullets. However, it is necessary to select the proper frequency and magnitude of oscillation depending on the soil properties of the field in which the mole drainer is practiced by use of a bal1nced type oscillating mole drainer. 12. It is recommended that a comparative study of the mole drainers would be performed in the near future using two separate balanced oscillating bullet with the one which is operated by oscillating the movable bullet in a single cylinder or other balanced type which may be single oscillating bullet with spring, damper or balancing weight, and that of thing. To expand the applicability of the balanced type oscillating mole drainer in practical use, it is suggested to develop a new mechanism which perform mole drain with vinyl pipe or filling material such as rice hull.

• Cartoon and Animation Studies
• /
• s.41
• /
• pp.279-306
• /
• 2015

This paper is a study of the changing nature of software for virtual Cyborg self and the virtual body that occur in the game from a philosophical point of view. Looking broadly, the cyborg concept refers to the combination of man and machine. Specifically, there is a hardware cyborg organism to combine human and restoration of machine In addition, there is software cyborg by electronic the human brain of converting a virtual body. Virtual games are cases software-Cyborg applied. In the game , There seems to have characteristics of virtual body and ego that different from general cyborg meaning. To analyze the features, I applied the concept of software-cyborg of Hans morabek and the multiple selves in cyberspace properties of Kim Sun-Hee. generally, software cyborg cloning the brain type tended to invalidate the body due to the nature of the virtual world. But If you look at third-person's view and the game character that made from real actors, it is pursuing the realism of photographic images and it stressed the need for a virtual body in order to maintain the psychological identity of the player. And, The game player crosses the eight characters to choose while completing the mission. This is a big role in the reality ego leads to the desired final ending with the selection and experience to be experienced as self-replication to multiple. These cyber multi-ego looks for an active and positive features compared to the multi-ego in the real world and highlights the advantages of the software cyborg. Game The characteristics of the final result varies depending on the selection of the player. The life and death of a friend is determined by the relationship between the characters friendship. In this case, the virtual self is empirically through trial and error, moral, and try to select the desired setting the standard for intuitive and self own choice. Also It can be fused to the knowledge of multiple selves as one step is formed by a high spiritual introspection. This process is a positive interpretation of the world and their own forms of mental reflection through self-overcoming human, Nietzsche is said that the process is Wibeomenswi.

• Journal of Life Science
• /
• v.19 no.7
• /
• pp.956-962
• /
• 2009

The aim of this study was to assess the effects of dentifrice-contatning grapefruit seed extract (GSE) and processed sulfur solution (PSS) on antimicrobial effects against oral pathogens. We first evaluated the antimicrobial effects of GSE and PSS against oral microbes: Streptococcus mutans (Sm), Prevotella intermedia (Pi), Porphyromonas gingivalis (Pg) and Candida albicans (Ca). When antimicrobial activity against Sm, Pi, Pg and Ca was tested, at 40 $\mu$l/disk, the inhibition zones of GSE were 11.0, 9.5, 8.0 and 9.0 mm, respectively. With the same method, the inhibition zones of PSS were 2.0, 3.5, 0.0 and 1.5 mm, respectively. In the micro broth dilution method, the MIC values of GSE against Sm, Pi, Pg and Ca were 0.24, 0.06, 0.10 and 15.63 $\mu$l/rnl, respectively. The MIC values of PSS were 0.12, 3.91,>125 and 7.81 $\mu$l/ml, respectively. When pH, refractive index, viscosity and color value of dentifrice-containing GSE and PSS were measured, there were no significant changes in these physical properties compared to the control samples. Antimicrobial activities of dentifrice products containing 0.5% GSE and 0.5% PSS against oral pathogens were 7.3, 4.3, 2.2 and 1.5 mm, respectively. According to these results, we conclude that there may be a role for GSE and PSS in the development of new oral supplies.

• Journal of the Korea Concrete Institute
• /
• v.24 no.6
• /
• pp.727-735
• /
• 2012

Recently, a high-strength strand of 2400 MPa was developed using domestic technologies. In 2011, KS D 7002 was revised to cover the newly developed high-strength strands to support their practical usage. Presently, however, discussions and evaluations are not sufficient on the mechanical properties of the strands and their performance in structural members. Also, there were no detailed reviews on the need to revise the current design code for practical use of the high-strength strands. In this study, flexural behavior of a member with the high-strength strands was estimated through sectional analysis and a review and comparison of the domestic and foreign design codes were conducted considering the analysis results. Also, the need for the revision of the design code was discussed. Such discussion especially focused on the estimation of the stress in strand, which related with various issues such as determination methods for yield point of strands, time-dependent loss of prestressing force, estimation of stress in strand at member failure, and net strain limit for ductile failure of member. The discussion revealed that some parts in the design code need a revision and the further studies are required.

• Journal of the Korean Institute of Electrical and Electronic Material Engineers
• /
• v.17 no.1
• /
• pp.7-15
• /
• 2004

The ferroelectric SBT thin films as a material of capacitors for non-volatile FRAMs have some problems that its remanent polarization value is relatively low and the crystallization temperature is quite high abovc 80$0^{\circ}C$. Therefore, in this paper, SBTN solution with S $r_{0.9}$B $i_{2.1}$T $a_{1.8}$N $b_{0.2}$$O_{9}$ composition was synthesized by sol-gel method. Sr(O $C_2$ $H_{5}$)$_2$, Bi(TMHD)$_3$, Ta(O $C_2$ $H_{5}$)$_{5}$and Nb(O $C_2$ $H_{5}$)$_{5}$ were used as precursors, which were dissolved in 2-methoxyethanol. SBTN thin films with 200 nm thickness were deposited on Pt/Ti $O_2$/ $SiO_2$/Si substrates by spin-coating. UV-irradiation in a power of 200 W for 10 min and rapid thermal annealing in a 5-Torr-oxygen ambient at 76$0^{\circ}C$ for 60 sec were used to promote crystallization. The films were well crystallized and fine-grained after annealing at $650^{\circ}C$ in oxygen ambient. The electrical characteristics of 2Pr=11.94 $\mu$C/$\textrm{cm}^2$, Ps＋/Pr＋=0.54 at the applied voltage of 5 V were obtained for a 200-nm-thick SBTN films. This results show that 2Pr values of the UV irradiated and rapid thermal annealed SBTN thin films at the applied voltage of 5 V were about 57% higher than those of no additional processed SBTN thin films. thin films.lms.s.s.

• Applied Biological Chemistry
• /
• v.34 no.3
• /
• pp.287-294
• /
• 1991

The relationships between the quantitative structure of benzotriazoles and their post-emergence growth inhibiting activity$(pI_{50})$ against Oryzae sativa L. and Echinochloa crus-galli were investigated using a generalized quantitative structure activity relationships (QSAR). According to the QSAR analysis, the free radical parameter $(E_R)$ is a very important factor and the growth inhibiting activity values showed parabolic relation to $E_R$ parameter of para-substituents(X). The activity of (3) was superior to those of (4) and (3b) is selected as the most highly effective compound. The optimal values of $E_R$ parameter of the growth inhibiting activity aganist E.crus-galli are $E_R(3)=0.52\;and\;E_R(4)=0.15$, respectively. From the result of molecular design, the substituents(X) of electron withdrawing properties and $E_R$ parameter of optimal value(0.52) were most desirable for high activity of the benzotriazoles. And in view of this, benzotriazoles may also be effective in blocking the photosynthetic electron transfer.

• Journal of the Korean Chemical Society
• /
• v.57 no.5
• /
• pp.618-624
• /
• 2013

We demonstrated unique inter- and intra-plasmonic coupling effects in bimetallic Au@Ag core-shell NP arrays which are regularly or randomly arranged on self-assembled block copolymer (BCP) inverse micelle monolayers. Polyvinylpyrrolidone (PVP)-stabilized Au@Ag core-shell NP arrays in regular or disordered configuration were incorporated and assembled on reconstructed PS-b-P4VP inverse micelle templates through two types of processes. The intensively enhanced LSPR coupling properties of individual and assembled Au@Ag NPs were evaluated by UV-visible spectroscopy in terms of the type of ligand stabilizer, coupling between Au and Ag, thickness of Ag shell, and type of array configuration. Finally, Au@Ag core-shell NP arrays were employed as active substrates for surface enhanced Raman spectroscopy (SERS) and a significantly enhanced signal enhancement was observed in accordance with the coupling intensity of Au@Ag NPs patterns.

• Polymer(Korea)
• /
• v.36 no.4
• /
• pp.525-530
• /
• 2012

In this study, silane-crosslinked organic/inorganic composite membranes were prepared by simultaneous irradiation grafting of binary monomer mixtures (styrene and 3-(trimethoxysilyl)propyl methacrylate (TMSPM)) with various compositions onto a poly(ethylene-alt-tetraethylene) (ETFE) film and followed by sol-gel processing and sulfonation to provide a silane-crosslinked structure and a proton conducting ability, respectively. The Fourier transform infrared spectroscopy (FTIR) and thermo gravimetric analysis (TGA) were utilized to confirm the crosslinking of ETFE-g-PS/PTMSPM films. The prepared membranes with similar ion exchange capacity but a different TMSPM content were selected and their membrane properties were compared. The ETFE-g-PSSA/PTMSPM membranes were characterized by water uptake, dimensional stability, and proton conductivity after sulfonation. The membrane electrode assemblies (MEA) of the prepared membranes were fabricated and their single cell performances were measured.

• Polymer(Korea)
• /
• v.35 no.3
• /
• pp.238-243
• /
• 2011

Organic/inorganic hybrid materials have a lot of interest in various areas due to their fascinating properties. To control the location and dispersion of inorganic nanoparticles within polymer matrix. thiol-terminated polymeric ligands have been widely used to tune the surface property of nanoparticles. However, the specific binding between the thiol functional group and metal is unstable with increasing temperature. To archive the thermally-stable Au nanoparticles, we previously synthesized various UV-crosslinkable polymeric ligands, which have different compositions of polar, UV-crosslinkable azide unit comparing to non-polar 스티렌 units. After crosslinking the Au nanoparticles, it was found that the nanoparticles had superb stability at high temperature (above $180^{\circ}C$). In this work, we used thermally-stable Au nanoparticles to control the location within the polymer matrix. By changing the amount of polar azide units in the polymeric ligands, we could precisely control the location of nanoparticles from one domain to the interface of block copolymer templates.