• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1987년도 정기총회 및 창립40주년기념 학술대회 학회본부
• /
• pp.200-202
• /
• 1987

Sintered CdS films on glass substrate with low electrical resistivity and high optical transmittance have been prepared by coating and sintering method. All-polycrystalline CdS/CdTe solar cells with different microstructure and properties of CdTe layer were fabricated by coating a number of CdTe slurries, which consisted of Cd and Te powders, an appropriate amount of propylene glycol and 2 or 7.5 w/o $CdC1_2$, on the sintered CdS films and by sintering the glass-CdS-(Cd+Te) composites at various temperature. To explore the dependence of the solar efficiency on the preparation conditions of the CdTe layer, Cd powder with an average particle size of $0.3{\mu}m$ or $5{\mu}m$ was prepared. The use of Cd with finer particles forms more dense or uniform microstructure of the nuclear of CdTe during the heating. Therefore the use of Cd with finer particles improves the efficiency of the sintered CdS/CdTe solar cell by improving the microstructure of sintered CdTe layer. But the difference of solar efficiency by varing a particle size of Cd is decreased with increasing amount of $CdC1_2$ in the (Cd+Te) layer. All-polycrystalline CdS/CdTe solar cells with an efficiency of 10.2% under solar irradiation have been fabricated using a Cd with finer particles.

• 설비공학논문집
• /
• 제16권2호
• /
• pp.142-149
• /
• 2004

Recently, the government introduced the thermal storage system for reducing the electric power load. Especially, the ice slurry type has gained lots of interest due to its good heat transfer and flowing characteristics. This study was peformed to understand the effects of transporting ice slurry through elbows of various angle. Propylene glycol water solution was used and about 2 mm ice particles were circulated. The experiments were carried out under various conditions, such as concentration and velocity of water solution ranging between 0∼20 wt％, 1.5∼2.5 m/s, respectively. And elbows with 4 different angles of 30$^{\circ}$, 45$^{\circ}$, 90$^{\circ}$, 180$^{\circ}$. The differential pressure and IPF (ice packing factor) between the pipe entry and exit were measured. The tendency of pressure loss and outlet IPF in elbow is that the pressure loss was reduced as concentration and flow velocity of water solution is increased, and low value appeared at 10 wt％ and 2.5 m/s. The variation of outlet IPF was compared with the inlet IPF in the range of $\pm$20％.

• Journal of Pharmaceutical Investigation
• /
• 제38권6호
• /
• pp.405-412
• /
• 2008

Six ester analogues of Ketorolac were synthesized as potential enhancer prodrugs for transdermal delivery. Solubility of these esters was determined in 10% propylene glycol (PG)/isotonic phosphate buffer (IPB) at room temperature while lipophilicity was obtained as partition coefficients (log P) and capacity factors (k') using HPLC. Stability of the prodrugs in skin extract and in plasma was investigated at $37^{\circ}C$. The lipophilicity of the potential prodrugs increased in proportion to their alkyl chain length. Good linear relationship between partition coefficients (log P) and capacity factors (log k') was observed ($R^2=0.9961$). All of the analogues were fairly stable but slowly degraded in IPB over a 12 hour period. However, their stability in skin extract and in plasma varied with most compounds gradually decomposing over a 12 hour period. Although unsaturation of the alkyl ester chain did not alter the over all lipophilicity of the compound, the half-life was significantly affected. In plasma, degradation of the esters was slower than in the skin extract, which is a desirable trait for enhancer-prodrugs. However, the overall hydrolysis in the skin extract needs to be facilitated for the development of an effective enhancer prodrug. The analogue with the shortest half life in the skin extract was the unsaturated C-12 analogue of 0.96 hr.

• 한국응용과학기술학회지
• /
• 제18권4호
• /
• pp.285-291
• /
• 2001

The liquid body foam which added the garlic extract, differs for clothes and kitchen detergent, industrial and domestic detergent, and it has various characteristics as a soft detergent for bath and hair product. The contents of various characteristics in this experiment have tested for the foam formation force, the moisture force and the antimicrobial force. In case of this product adding garlic extrat, we could know the three characteristics. In first case to increase the concentration of Sunfom-S, we could know that the foam formation force increases following to it. In second case to increase the concentration of propylene glycol, we could know that the moisture force increases following to moisturing agent. In third case to increase the concentration of garlic extract, we could know that the antibiosis and preservation efficacy appears between 3.0-4.0wt% and the sterilization efficacy appears more than 5.0wt%. According to the result of this experiment, we could recognize the characteristics concerning to quality of this product.

• 대한기계학회:학술대회논문집
• /
• 대한기계학회 2008년도 추계학술대회B
• /
• pp.2540-2543
• /
• 2008

Liquid crystal displays (LCD's) are continuously coated with some chemicals in the clean room of a factory. Spreading of these chemicals is causing serious problems both in controlling clean room quality as well as to the workers inside the factory. It is required to alleviate or properly control the offensive odor which is mainly composed of propylene glycol mono ethyl acetate, novolak resin and photo active compound. The control strategy employed is to bleed the offensive odor gas out the clean room. A full scale 3D CFD model was created with anisotropic porous media, chemical species transport with no volumetric reaction, and thermal diffusion with propane gas (tracer gas) to simulate the odor spreading. A segregated implicit solver with standard k-$\varepsilon$ model is employed. The detailed CFD analysis made it possible to develop an effective method of ventilating the coater room and optimizing their capacities.

• 설비공학논문집
• /
• 제16권11호
• /
• pp.1028-1034
• /
• 2004

Recently, the ice storage system using ice slurry has been used increasingly since it has been introduced where the rapid cooling load change is required. Because it overcomes a decrease of the melting performance and an increase of the thermal resistance on the ice layer in static ice thermal storage system. This study is performed to understand the effects of transporting ice slurry through horizontal, vertical and inclined tubes ($30^{\circ},\;45^{\circ}$). It used propylene glycol-water solution and ice particles (diameter of about 2 mm) in this experiment. The experiments were carried out under various conditions, with concentration of water solution ranging from 0 to $20wt\%$, and velocity of water solution at the entry ranging from 1.5 to 2.5 m/s. The results were as follows: Regarding the angle of inclined tube, the highest pressure loss was measured for vertical tube and the pressure loss for $45^{\circ},\;30^{\circ}$, horizontal straight tubes were lower successively. The lowest pressure loss in these tubes was measured at velocity of $2.0{\sim}2.5m/s$ and concentration of $10wt\%$. The outlet IPF was likewise stable in these ranges.

• 대한화장품학회지
• /
• 제21권2호
• /
• pp.94-111
• /
• 1995

Paraben에 대한 Oil의 분배계수를 측정하고, 실제 에멀젼을 제조하여 방부력을 비교 측정하였다. 분배계수측정은 Hydrocarbon, Ester, Silicone Oil류로 분류하여 실험을 하였으며, Stirring Time, Temperature, Volume ratio에 따른 최적실험조건을 결정하여 실험을 수행하였다. 각각의 oil 종류에 따라 분배계수 값의 차이가 많았으며, 특히 Ester oil 류의 분배계수 값이 다른 오일 류에 비해 상당히 높음을 알 수 있었고, 오일의 Paraben에 대한 분배계수에 Propylene Glycol이 좋은 효과를 나타냄을 관찰하였다. 또한 각각의 오일을 주 처방으로 한 에멀젼을 제조하여, Challenge test에 주로 사용하는 5종의 미생물을 접종하여 균의 사멸속도를 비교한 결과, 분배계수가 낮은 오일을 함유한 에멀젼일수록 빠른 사멸속도를 보여주었다.

• Journal of Pharmaceutical Investigation
• /
• 제28권1호
• /
• pp.7-13
• /
• 1998

The captopril microcapsules were prepared and were investigated by measuring their size distribution using Scanning Electron Microscopy(SEM) and dissolution of captopril. Cetyl alcohol microcapsules prepared by emulsion melted-cooled method with various ratios of drug to cetyl alcohol were spherical and uniform. The release rate of cetyl alcohol microcapsules was decreased proportionally as the content of cetyl alcohol increased but, the particle size of microcapsules was increased. The surface of cetyl alcohol microcapsules was comparatively rough as drug content increased. Pellet type microcapsules were prepared using fluidized-bed coating system by spraying captopril solution on nonpareil-seeds followed by applying $Eudragit^{\circledR}$ RS solution containing propylene glycol as a plasticizer. The release rate of drug from pellet type microcapsules decreased as the content of $Eudragit^{\circledR}$ RS increased.

• Journal of Pharmaceutical Investigation
• /
• 제34권4호
• /
• pp.275-281
• /
• 2004

We have studied the effect of polarity, current density, current duration, crosslinking density, swelling ratio, and permeation enhancers on the transdermal flux of ketoprofen from acrylamide hydrogel. Hydrogel was prepared by free radical crosslinking polymerization of acrylamide. Drug loading was made just before transport experiment by soaking the hydrogel in solution containing drug. In vitro flux study using hairless mouse skin was performed at $36.5^{\circ}C$ using side-by-side diffusion cell, and the drug was analysed using HPLC/UV system. The result showed that, compared to passive flux, the total amount of drug transported increased about 18 folds by the application of $0.4\;mA/cm^2$ cathodal current. Anodal delivery with same current density also increased the total amount of drug transported about 13 folds. It seemed that the increase in flux was due to the electrorepulsion and the increase in passive permeability of the skin by the current application. Flux increased as current density, the duration of current application and loading amount (swelling duration) increased. As the cross linking density of the hydrogel increased, flux clearly decreased. The effect of hydrophilic enhancers (urea, N-methyl pyrrolidone, Tween 20) and some hydrophobic enhancers (propylene glycol monolaurate and isopropyl myristate) was minimal. However, about 3 folds increase in flux was observed when 5% oleic acid was used. Overall, these results provide some useful information on the design of an optimized iontophoretic delivery system of ketoprofen.

• 한국식품위생안전성학회지
• /
• 제27권4호
• /
• pp.461-465
• /
• 2012

본 실험에서는 여드름 치료에 사용되던 국소 레티노이드제와 항생제를 대용 할 수 있고 화장품에 사용되는 원료로 추출하여 항여드름 치료제 또는 화장품 원료를 개발하기 위해 실험한 결과 broccoli proplyeneglycol 그룹에서 DPPH, superoxide radical, nitric oxide assay 에서 모두 vitamin C에 가까운 활성을 나타내었고 paper disk diffusion test에서는 broccoli ethanol과 broccoli hexane 그룹에서 P. acne의 저해 활성을 나타낸 것으로 보아 항여드름 치료제 또는 화장품 원료로써의 유용 가치가 있다고 사료 되어진다.