• Membrane Journal
• /
• v.15 no.2
• /
• pp.157-164
• /
• 2005

In this study, composite hollow fiber membranes were developed for the recovery of olefin monomers in polyolefin industry off-gases. Polyetherimide (PEI) hollow fiber support membranes were fabricated from spinning solutions containing PEI, NMP and polyethylene glycol (PEG). The influence of dope solution and inner coagulant composition on the permeation properties and structure of hollow fiber supports was examined. PDMS was used as a selective layer and coated on PEI hollow fiber support. The thickness of active layer was controlled by changing coating solution concentration. The permeation properties of hollow fiber supports and composite membranes were characterized with a pure gas permeation test. The optimized composite hollow fiber membrane has $10\;{\mu}m$ selective layer and shows excellent separation performance; the ideal selectivity of olefins over nitrogen is in the following order: 1-butylene (6.4) > propylene (17) > ethylene (97), which selectivity data are similar to the intrinsic olefin/nitrogen selectivities of PDMS. This confirms that the new composite hollow fiber membranes suitable for olefin off-gas recovery has developed successfully.

• Journal of the Microelectronics and Packaging Society
• /
• v.13 no.1 s.38
• /
• pp.37-42
• /
• 2006

The preparation and processing of PVP-gate insulators on the device performance have been studied in the fabrication of organic thin film transistors (OTFTs). One of polyvinyl series, poly-4-vinyl phenol(PVP) was used as a solute and propyleneglycol monomethyl etheracetate(PGMEA) as a solvent in the formation of organic gate solutions. The cross-linking of organic insulators was also attempted by adding the thermosetting material, poly (melamine-co-formaldehyde) as a hardener in the compounds. From the measurements of electrical insulating characteristics of metal-insulator-metal (MIM) samples, PVP-based insulating layers showed lower leakage current according to the increase of concentration of PVP and poly (melamine-co-formaldehyde) to PGMEA in the formation of organic solutions. The PVP(20 wt%) copolymer with composition of 20 wt% PVP to PGMEA and cross-linked PVPs in which 5 wt% and 10 wt% poly (melamine-co-formaldehyde) hardeners had been additional]y mixed into PVP(20 wt%) copolymers were used as gate dielectrics in the fabrication of OTFTs, respectively. In our experiments, the maximum field effect mobility of $0.31cm^2/Vs$ could be obtained in the 5 wt% cross-linked PVP(20 wt%) device and the highest on/off current ratio of $1.92{\times}10^5$ in the 10 wt% cross-linked PVP(20 wt%) device.

• Journal of Food Hygiene and Safety
• /
• v.27 no.1
• /
• pp.50-54
• /
• 2012

$Salmonella$ spp. and $Brucella$ spp. have caused a considerable disease of farmed animals and economic loss in animal farming and food industry. In this study, the disinfection efficacy of Vital-$Oxidel^{(R)}$, a commercial disinfectant, composed to chlorine dioxide, betaine hydrochloride, and propylene glycol was evaluated against $S.$ $typhimurium$ and $Brucella$ $ovis$. A bactericidal efficacy test by broth dilution method was used to determine the lowest effective dilution of the disinfectant following exposure to test bacteria for 30 min at $4^{\circ}C$. Vital-$Oixdel^{(R)}$ and test bacteria were diluted with distilled water (DW), hard water (HW) or organic matter suspension (OM) according to treatment condition. On OM condition, the bactericidal activity of Vital-$Oixdel^{(R)}$ against S. typhimurium and Brucella ovis was lowered compared to that on HW condition. As Vital-$Oxidel^{(R)}$ possesses bactericidal efficacy against animal pathogenic bacteria such as $S.$ $typhimurium$ and $Brucella$ $ovis$, this disinfectant solution can be used to control the spread of bacterial diseases.

• Korean Journal of Food Science and Technology
• /
• v.15 no.4
• /
• pp.353-358
• /
• 1983

This study indicated that mackerel flesh can be prepared as an intermediate moisture deep-fried product. The fillet were cut into $2{\times}2{\times}1.5cm$ (about 4g each): then submerged in an infusion solution (lg flesh: 1ml solution) containing 45.9% of water, 6% of sodium chloride, 40% of sorbitol, 2.4% of propylene glycol, 0.7% of potassium sorbate, 3% of sugar, 2% of monosodium glutamate, and $0.6m{\ell}$ of alcoholic extracts from red pepper, and heated for 10 min at $105^{\circ}C$. The infused flesh was drained for 15 min and then coated with batter and crumb. The pieces were deep fried in soybean oil for 3 min at $170^{\circ}C$ and cooled on absorbent paper. The initial water activity of the product was 0.86. Judging from the results of experimental data such as peroxide value, TBA value, viable cell count and sensory evaluation, the quality of products were stable for 50 days at room temperature ($25{\pm}2^{\circ}C$).

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.35 no.4
• /
• pp.309-314
• /
• 2002

Rhtological properties of surimi gel from white fishes by acid (acid surimi) and alkali (alkali surmi) process and effect of chemicals on gelation were investigated by punch and dynamic tests. The breaking force and deformation values of heat-induced gel of acid surimi were less than their values of alkali and conventional surimi gel, and whiteness was greatly decreased, Gel point of acid surimi was decreased but it of alkali surimi was increased with increasing moisture content in the range of 80 to $85\%$. Storage modulus of acid surimi was the highest vaule in pH 6.8, but that of alkali surimi showed high value at neutral and slightly alkali pH. Propylene glycol increased storage modulus in $20\~50^{\circ}C$, hut urea and 2-mercaptoethanol suppressed it. Potassium bromide improved storage modulus in $20~80^{\circ}C$, The results suggest that alkai process is used for making surimi instead of conventional method.

• Journal of the Korean Chemical Society
• /
• v.37 no.4
• /
• pp.378-389
• /
• 1993

The release of steroids such as progesterone, testosterone, estrone and estradiol were investigated in two types of block copolymer matrices, which were AB type block copolymer composed of poly(γ-benzyl-L-glutamate)[PBLG] as the A segment and polyoxypropylene[POP] as the B segment and ABA type triblock copolymer composed of the A segment and poly(propylene glycol)[PPG] as the B segment. The release rates of progesterone, estradiol and testosterone through PBLG-POP1 and PBLG-POP2 matrices and those of progesterone, estrone and testosterone through GPG1 of ABA type triblock copolymer were higher in an acidic solution than in a basic one. However, the release rate of estrone through PBLG-POP1 and PBLG-POP2 matrices and that of estradiol through GPG1 of ABA type triblock copolymer were higher in a basic and neutral solutions than in an acidic one. The order of release rate in three different matrices was GPG1 > PBLG-POP1 > PBLG-POP2. The results also showed that the molecular weight of steroids is inversely proportional to the rate of release.

• Journal of Pharmaceutical Investigation
• /
• v.29 no.3
• /
• pp.217-225
• /
• 1999

These studies were designed to determine the effect of hydroalcoholic gel system (lower alkanol concentration: 40-60%) compared to general hydrogel system (lower alkanol concentration: 10-35%) on transdermal delivery of piroxicam and its anti-inflammatory activity. Piroxicam was incorporated into a hydroalcoholic gel and a hydrogel containing polymers, solvents, and cosolvents. The pH of gel was about 6.3-7.3 and the solvent mixtures were composed of water and various concentrations of ethanol (35, 40, 50, and 60%). For the in vitro study, the skin permeation of piroxicam from the gel formulations was investigated using Franz modified diffusion cells fitted with hairless mouse skin. For the in vivo study, the anti-inflammatory activity of hydroalcoholic gel was compared to other commercial products (piroxicam hydrogel and ketoprofen hydrogel) in rat and human. The anti-inflammatory activity was determined using carrageenan induced foot edema model in rat. For the clinical study, it was evaluated from determining efficacy and acceptability with 98 patients suffering from musculoskeletal pain. A novel piroxicam hydroalcoholic gel was successfully formulated in the range of 40-50% of ethanol as solvent, more than 10% of propylene glycol, 5% of $Transcutol^{\circledR}$ and 1 % of benzyl alcohol. The skin permeation of piroxicam using hydroalcoholic gel system was greater than that of general hydrogel system $(flux\;:\;139.1-148.2\;{\mu}g/cm^2/hr\;vs.43.0-84.5 {\mu}g/cm^2/hr)$ in vitro. In carrageenan-induced edema model, the anti-inflammatory activity of hydroalcoholic gel was better than that of piroxicam hydrogel for edema inhibition (75.1 % vs. 62.9%, p

• Membrane Journal
• /
• v.25 no.6
• /
• pp.496-502
• /
• 2015

Facilitated transport is one of the possible solutions to simultaneously improve permeability and selectivity, which is challenging in conventional polymer-based membranes. Olefin/paraffin separation using facilitated transport membrane has received much attention as an alternative solution to the conventional distillation process. Herein, we report olefin separation composite membranes based on the polymer blends containing $AgBF_4/Al(NO_3)_3$ mixed salts. Free radical polymerization process was used to synthesize an amphiphilic graft copolymer of poly(dimethyl siloxane)-graft- poly(ethylene glycol) methyl ether methacrylate (PDMS-g-POEM). In addition, poly(ethylene oxide) (PEO) was introduced to the PDMS-g-POEM graft copolymer to form polymer blends with various ratios. The propylene/propane mixed-gas selectivity and permeance reached up to 5.6 and 10.05 GPU, respectively, when the PEO loading was 70 wt% in polymer blend. The improvement of olefin separation performance was attributed to the olefin facilitating silver ions as well as the highly permeable blend matrix. The stabilization of silver ions in the composite membrane was achieved through the introduction of $Al(NO_3)_3$ which suppressed the reduction of silver ions to silver particles.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.33 no.4
• /
• pp.313-318
• /
• 2013

A study was conducted to determine if subacute ruminal acidosis (SARA) induced by feeding high level of non-structural carbohydrates results in increases in lipopolysaccharides (LPS) of peripheral blood in dairy cattle. In this experiment four Holstein steers, two of which having ruminal canulae with indwelling probes placed for measuring long term pH changes, were alloted into two dietary treatments in a cross-over design, where an acidogenic diet (AD) was formulated by including high amount of non-structural carbohydrates (NSC) based on corn silage and corn flake as TMR ingredients. Data for ruminal pH change and plasma LPS concentration were compared against normal diet (ND) which contained grass hay as forage and low NSC ingredients. Feeding AD for more than 14 days to animals brought about a pH change as low as less than 5.8 for more than 4 hours, which made good contrast to ND fed animals. Decreased ruminal pH also had an effect on LPS concentrations which showed significantly higher level for AD compared with ND. Therefore, plasma LPS concentration may be used as an effective indicator to verify acidosis whether it is acute or chronic. Na-bentonite and Propylene glycol, which are frequently included in dairy TMR as additives, helped decrease ruminal pH by buffering and then ultimately alleviates SARA. Therefore, it could also be helpful to lower the occurrence of laminitis which is often caused by increased blood endotoxin (LPS) concentration.

• Applied Chemistry for Engineering
• /
• v.34 no.1
• /
• pp.80-85
• /
• 2023

New yellow quinoline-dione dye derivatives were designed and synthesized for use in image sensor color filters. The synthesized compounds have a basic chemical structure composed of quinoline and dione groups. New materials were evaluated on the basis of their optical and thermal properties under conditions mimicking those of a commercial device fabrication process. A comparison of their related performances revealed that, between the two prepared compounds, 2-(3-hydroxyquinolin-2(1H)-ylidene)-1H-indene-1,3(2H)-dione (HQIDO) exhibited the superior performance as an image sensor color filter material, including a solubility greater than 0.5 wt% in propylene glycol monomethyl ether acetate solvent and a high decomposition temperature of 298 ℃, respectively. The results suggest that HQIDO can be used as a yellow dye additive in an image sensor colorant.