• Journal of Wetlands Research
• /
• v.26 no.3
• /
• pp.266-271
• /
• 2024

In order to minimize damage from disasters, rapid initial measures using disaster response manuals are needed. However, the existing disaster response manual is written in the form of a vast booklet, so there is a limit to accurately understanding the contents of the manual and using it for disaster response. Therefore, this study established an e-SOP system based on the disaster response manual, and suggested countermeasures using the e-SOP in the event of a disaster. Based on the guidelines for preparing the on-site action manual, the main functions of the e-SOP consisted of situation propagation, situation reporting, and situation management. In order to increase the on-site responsiveness and usability of the system, the bottom-up reporting system was strengthened so that the person in charge could report the response situation of the site to the situation room using the situation reporting function. In addition, the situation room was able to identify and manage the progress of disaster response work and support decision-making through situation reports delivered from the field.

• Journal of the Computational Structural Engineering Institute of Korea
• /
• v.37 no.4
• /
• pp.267-274
• /
• 2024

Hydrogen embrittlement fracture poses a challenge in ensuring the structural integrity of materials exposed to hydrogen-rich environments. This study advances our comprehension of hydrogen-induced fracture through an integrated numerical modeling approach. In addition, it employs a ductile fracture model named the Gurson-cohesive model (GCM) and hydrogen diffusion analysis. GCM is employed as a fracture model that combines the Gurson model to illustrate the continuum damage evolution and the cohesive zone model to describe crack surface discontinuity and softening behavior. Moreover, porosity and stress triaxiality are considered as crack initiation criteria . A hydrogen diffusion analysis is also integrated with the GCM to account for hydrogen enhanced decohesion (HEDE) mechanisms and their subsequent impacts on crack initiation and propagation. This framework considers the influence of hydrogen on the softening behavior of the traction-separation relationship on the discontinuous crack surface. Parametric studies explore the sensitivity to diffusion properties and hydrogen-induced fracture properties. By combining numerical models of hydrogen diffusion and the ductile fracture model, this study provides an understanding of hydrogen-induced fracture and thereby contributes significantly to the ongoing efforts to design materials that are resilient to hydrogen embrittlement in practical engineering applications.

• 한국석유지질학회:학술대회논문집
• /
• autumn
• /
• pp.63-65
• /
• 2001

The Chosen Supergroup (Cambro-Ordovician), mid-east Korea consists mainly of shallow marine carbonates and contains a variety of limestone conglomerates. These conglomerates largely comprise oligomictic, rounded lime-mudstone clasts of various size and shape (equant, oval, discoidal, tabular, and irregular) and dolomitic shale matrices. Most clasts are characterized by jigsaw-fit (mosaic), disorganized, or edgewise fabric and autoclastic lithology. Each conglomerate layer is commonly interbedded with limestone-dolomitic shale couplets and occasionally underlain by fractured limestone layer, capped by calcareous shale. According to composition, characteristic sedimentary structures, and fabric, limestone conglomerates in the Hwajol, Tumugol, Makkol, and Mungok formations of Chosen Supergroup can be classified into 4 types: (1) disorganized polymictic conglomerate (Cd), (2) horizontally stratified polymictic conglomerate (Cs), (3) mosaic conglomerate (Cm), and (4) disorganized/edgewise oligomictic conglomerate (Cd/e). These conglomerates are either depositional (Cd and Cs) or diagenetic (Cm and Cd/e) in origin. Depositional conglomerates are interpreted as storm deposits, tidal channel fills, or transgressive lag deposits. On the other hand, diagenetic conglomerates are not deposited by normal sedimentary processes, but formed by post-depositional diagenetic processes. Diagenetic conglomerates in the Chosen Supergroup are characterized by autoclastic and oligomictic lithology of lime-mudstone clasts, jigsaw-fit (mosaic) fabric, edgewise fabric, and a gradual transition from the underlying bed (Table 1). Autoclastic and oligomictic lithologies may be indicative of subsurface brecciation (fragmentation). Consolidation of lime-mudstone clasts pre-requisite for brecciation may result from dissolution and reprecipitation of CaCO3 by degradation of organic matter during burial. Jigsaw-fit fabric has been considered as evidence for in situ fragmentation. The edgewise fabric is most likely formed by expulsion of pore fluid during compaction. The lower boundary of intraformational conglomerates of depositional origin is commonly sharp and erosional. In contrast, diagenetic conglomerate layers mostly show a gradual transition from the underlying unit, which is indicative of progressive fragmentation upward (Fig. 1). The underlying fractured limestone layer also shows evidence for in situ fragmentation such as jigsaw-fit fabric and the same lithology as the overlying conglomerate layer (Fig, 1). Evidence from the conglomerate beds in the Chosen Supergroup suggests that diagenetic conglomerates are formed by in situ subsurface fragmentation of limestone layers and rounding of the fragments. In situ subsurface fragmentation may be primarily due to compaction, dewatering (upward-moving pore fluids), and dissolution, accompanying volume reduction. This process commonly occurs under the conditions of (1) alternating layers of carbonate-rich and carbonate-poor sediments and (B) early differential cementation of carbonate-rich layers. Differential cementation commonly takes place between alternating beds of carbonate-rich and clay-rich layers, because high carbonate content promotes cementation, whereas clay inhibits cementation. After deposition of alternating beds and differential cementation, with progressive burial, upward-moving pore fluid may raise pore-pressure in the upper part of limestone layers, due to commonly overlying impermeable shale layers (or beds). The high pore-pressure may reinforce propagation of fragmentation and cause upward-expulsion of pore fluid which probably produces edgewise fabric of tabular clasts. The fluidized flow then extends laterally, causing reorientation and further rounding of clasts. This process is analogous to that of autobrecciation, which can be analogously termed autoconglomeration. This is a fragmentation and rounding process whereby earlier semiconsolidated portions of limestone are incorporated into still fluid portions. The rounding may be due mainly to immiscibility and surface tension of lime-mud. The progressive rounding of the fragmented clasts probably results from grain attrition by fluidized flow. A synthetic study of limestone conglomerate beds in the Chosen Supergroup suggests that very small percent of the conglomerate layers are of depositional origin, whereas the rest, more than $80\%$, are of diagenetic origin. The common occurrence of diagenetic conglomerates warrants further study on limestone conglomerates elsewhere in the world.

• Journal of Korean Society of Steel Construction
• /
• v.27 no.6
• /
• pp.513-523
• /
• 2015

In steel moment frames constructed of H-shapes, strong-axis moment connections should be used for maximum structural efficiency if possible. And most of cyclic seismic testing, domestic and international, has been conducted for strong-axis moment connections and cyclic test data for weak-axis connections is quite limited. However, when perpendicular moment frames meet, weak-axis moment connections are also needed at the intersecting locations. Especially, both strong- and weak-axis moment connections have been frequently used in domestic practice. In this study, cyclic seismic performance of RBS (reduced beam section) weak-axis welded moment connections was experimentally investigated. Test specimens, designed according to the procedure proposed by Gilton and Uang (2002), performed well and developed an excellent plastic rotation capacity of 0.03 rad or higher, although a simplified sizing procedure for attaching the beam web to the shear plate in the form of C-shaped fillet weld was used. The test results of this study showed that the sharp corner of C-shaped fillet weld tends to be the origin of crack propagation due to stress concentration there and needs to be trimmed for the better weld shape. Different from strong-axis moment connections, due to the presence of weld access hole, a kind of CJP butt joint is formed between the beam flange and the horizontal continuity plate in weak-axis moment connections. When weld access hole is large, this butt joint can experience cyclic local buckling and subsequent low cycle fatigue fracture as observed in this testing program. Thus the size of web access hole at the butt joint should be minimized if possible. The recommended seismic detailing such as stickout, trimming, and thicker continuity plate for construction tolerance should be followed for design and fabrication of weak-axis welded moment connections.

• Journal of the Korean Institute of Landscape Architecture
• /
• v.42 no.4
• /
• pp.48-59
• /
• 2014

This study was carried out to present raw data on managing the restored urban stream by studying the naturalized plants distributed in Gaeumjeong Stream, Changwon-si, Gyeongsangnam-do, Korea. The results were as follows. The numbers of naturalized plants were summarized as 45 taxa including 17 families, 36 genera, 43 species and 2 varieties. The invasive alien plants were 2 taxa including Ambrosia artemisiifolia and Lactuca sativa. The following summarizes the attributes of the naturalized plants. Most of the plants commonly originated from Europe and North America. The 5 naturalized degree that was widely distributed and had many individual was the most common. Until 1921, after the opening of 1 period was the most common in the introduced period. Section 12 had the highest NI at 41.9%, and the lowest, at 20.5%, in sections 9 and 19 were analyzed. Section 1 had the highest UI at 6.2%, whereas, the lowest, at 2.5%, was calculated in sections 19 and 20. Section 2 showed the highest DI at 16.7%. The first results of the analysis of the causes for the invasion of naturalized plants on the riverside and waterways, and physical factors and maintenance are directly affected. Second, sewage, muddy water and sediment deposits this naturalized plant caused by a chemical factor. Third, it is thought that invasive alien plants are irregular as it happens in biological factor. The proposed management plan naturalized plants, the first, disturbance caused by species management is a young object is removed immediately before flowering scape to eliminate or suppress the propagation of physical methods will be needed. Second, the fact that the national spread of native plant species and planting management does not provide space for the growth is very important. Third, agricultural land is disturbed by agricultural practices by interfering with the action of naturalized plants because the source of the river should be prohibited in agriculture. In the future, if we studied the naturalized plants distributed in restored streams located in Changwon-si, the characteristics of change in the ecosystem impact is expected to be beneficial.

• Korean journal of applied entomology
• /
• v.15 no.1 s.26
• /
• pp.7-16
• /
• 1976

In order to increase utility efficiency of red wood ants, Formica rufa truncicola var. yessonesis Forel as a resource of natural enemy of pine caterpillar, Dendrolimus spectabilis Butler, by finding out ecological and environmental factors in the habitat of red wood ants, the nest distribution and its density in habitat, plant distribution and density, stand-density of red pine, nest building and fixing plants, relative humidity of surface soil, physical and chemical natures of soil, and breeding rate were examined. The obtained results are summarized as follows: 1. The nest of red wood ants was densely distributed, in the lower-and middle top of mountain but no nest was found in the top. 2. The economical distribution of nest of habitat was estimated as $2.85/m^2$ and the lowest density as $1.93/m^2$ and these estimation lead us to confirm that pine caterpillar could be controlled. 3. The ecological characteristics of habitat seemed to be represented as higher stand-density of red pine of 10-20 years of age with large areas of eroded land under trees. The major grasses prevailing in this area were Andropogon brevifolius. Arundinella hirta, Miscanthus purpurasens, Eulia speciosa, Themeda japonica, Cymbopogon goeringii, and Eccoilpus cotulifer 4. Red wood ants seemed to build the nest by using red pine, Arundinella hirta, Miscanthus purpurascens, Themeda japonica or Cymbopogon goeringii as a fixing plant. 5. The limited point of humidity percent in habitat of red wood ants was estimated as $76\%$ during the acting period of May to September and as $72\%$ during pre-period of hibernation of October to November. 6. Soil analysis in habitating region showed higher concentration of organic matters and lower concentration of calcium and magnesium, and habitat was largely composed of silt and fine sand rather than coarse sand. 7. When the separated colony was transplanted to non-habitating red pine forest that seemed to have the similiar conditions as those of habitat, propagation and establishment of nest was possible.

• Korean Journal of Environment and Ecology
• /
• v.31 no.4
• /
• pp.349-364
• /
• 2017

Duckweed family (Lemnaceae Martinov), including the genus Lemna L., is a typical floating aquatic perennial plant, and about five genera and 40 species in the family are in wide distribution around the world except the polar regions. The genus Lemna is the smallest and the simplest plant among the angiosperms. It has a characteristic of doubling every three days with fast vegetative propagation, which helps the organisms to increase in rapid growth. As such, the plant is ideal for environmental pollution assessment and toxicity test. Although taxonomists and scholars have used different scientific names for the species, many of them have agreed that there is only one member of species of the genus Lemna in Korea. Paying attention to the external morphological variation observed in the Korean genus Lemna, we conducted a molecular phylogenetic analysis to identify the entity of the Korean Lemna species and to investigate the possibility of two or more members of the species existing in Korea. We determined and aligned the DNA sequences of the atpF-H region of the chloroplast DNA in 37 populations of the nationally distributed Lemna species. The results showed that the sequence length of the cp DNA atpF-H region was 463-483 bp, the length of the aligned sequences was 488 bp, and the number of variation site in nucleotide sequences was 47. There were two types of aligned sequences of the cp DNA atpF-H region from 37 populations of Lemna species in Korea. The maximum parsimony analysis revealed that the Korean Lemna consists of two clades, and one of them had two subclades. The results suggest that, contrary to the general understanding, at least two taxa (L.aequinoctialis, L.minor) exist in Korea.

• Journal of the Korean Society of Costume
• /
• v.50 no.7
• /
• pp.195-218
• /
• 2000

This study investigates the characteristics of European knitted works from a historical perspective. Specifically, this study deals with the following research topics: 1) the origin and development of knitting. 2) the characteristics of knitting industry according to the change of times, 3) the comparison of local knitting patterns and cultures. 4) 7he symbolic meaning of the designs in the knitted works and theire functions. This research is barred on the survey of the relevant literature and photographs. The results of the study are summarized as follows. 1) The introduction of knitted works was closely connected with the climatic and socio-economic conditions of the places of the origin. Knitted work developed mostly in Northern Europe, a cold area, and the barren, mountainous coastal areas where people frequently used woolen materials for clothes. 2) In ancient times, abstract and geometric patterns have developed in Europe under the influence of Arabian knitted work. Middle Ages saw the flourishing of Arabian knitted works representing the authority of the church. In early modern times, the knitted work assumed the wealth of the royal families and the nobles. But afterward it was gradually Popularized among the middle classes. Knitting was then regarded as one of the women's major cultural activities. However, recently in the interwar periods. the knitting industry did not flourish and the knitted works came to serve merely as comfort goods by political urge. Knitted works were introduced in Korea around 1870 (the 7th or 8th year of king Kojong era) by Catholic missionaries and they started to be made by machine in 1917. 3) As for the propagation of the knitted work into Europe, there are three routes estimated. The traditional knitting patterns of local areas and their characteristics are summed up as follows : (1) England Guernseys are thick dark blue wool, whereas Jerseys are thinner and of various colors. The knitted shawls of Shetland are world-famous for their fine, lace-like texture that they can be through a wedding-ring. The knitted work of Fair Isle shows several distinctive features, such as the use of no more than two colors, patterns with diagonal lines. symmetry within the patterns, the prominent OXO patterns, and horizontal bands of patterning. The representative knitted work of Aran is Aran sweater made for fishermen to developed from guernseys of Scotland. (2) Scandinavian countries are distinguished from other countries by their conservative but creative cultural tradition. Their knitting patterns are characterized by small geometric figures such as dots, triangles, squares, rhombuses, and crosses used often with stars and roses. Scandinavian knitting is also salient for its vertical stripes and simple motifs repeating at short intervals. (3) Baltic area : The Latvian and Lithuania stockings have very ornate patterns. Many of the Estonian knit stockings and mittens share designs. Komi was well-known for its symmetric diamond pattern. Komi patterns include colored stripes, borders of pattern and all-over designs of complex diagonals. (4) Balkan area : In Yugoslavia, the patterns of roses, leaves and flowers were used for stockings, gloves and leggings. Greek knitting resembled southern Russian knitting, which utilized light colored patterns with dark colors for a background. Turkish patterns are symmetric vertically or horizontally. 4) The traditional knitting patterns net only carried symbolic meanings but also served as means of communication. First of all, patterns had incantatory meanings. Patterns also represented Power or authenticity Patterns were symbolic of one's social standing, too. The colors, motifs and their arrangements were very important features symbolizing one's social position or family line. People often communicated by certain pieces of knitted work or patterns.

• Korean Journal of Medicinal Crop Science
• /
• v.2 no.3
• /
• pp.198-204
• /
• 1994

This study was carried out to investigate the auxin(IAA, IBA, NAA) treatment and the effect of shading rate in Asarum sieboldii. The results obtained were summerized as follows: By the soaking treatment of auxins to the cutted rhizome enhanced root growth and plant weight. By the increment of shading rate, plant growth was much better compare to the control. Leaf fallen times appeared about 20 days more earlier at plain area then the alpain area. Root yield was much higher by the treatment of shading then the conventional cultivation so it seem to be the useful for large scale cultivations of A. sieboldii.

• Journal of The Korean Association For Science Education
• /
• v.32 no.1
• /
• pp.160-181
• /
• 2012

The purpose of this study is to understand raters' errors in rating performance assessments of science inquiry. For this, 60 middle school students performed scientific inquiry about sound propagation and 4 trained raters rated their activity sheets. Variance components estimation for the result of the generalizability analysis for the person, task, rater design, the variance components for rater, rater by person and rater by task are about 25%. Among 4 raters, 2 raters' severity is higher than the other two raters and their severities were stabilized. Four raters' rating agreed with each other in 51 cases among the 240 cases. Through the raters' conferences, the rater error types for 189 disagreed cases were identified as one of three types; different salience, severity, and overlooking. The error type 1, different salience, showed 38% of the disagreed cases. Salient task and salient assessment components are different among the raters. The error type 2, severity, showed 25% and the error type 3, overlooking showed 31%. The error type 2 seemed to have happened when the students responses were on the borders of two levels. Error type 3 seemed to have happened when raters overlooked some important part of students' responses because she or he immersed her or himself in one's own salience. To reduce the above rater errors, raters' conference in salience of task and assesment components are needed before performing the holistic scoring of complex tasks. Also raters need to recognize her/his severity and efforts to keep one's own severity. Multiple raters are needed to prevent the errors from being overlooked. The further studies in raters' tendencies and sources of different interpretations on the rubric are suggested.