• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.52 no.4
• /
• pp.344-348
• /
• 2019

This study assessed the microbiological hazards of gloves worn during the shell shucking process of the oyster Crassostrea gigas, and we suggest an in situ method for minimizing microbial contamination. The study consisted of two groups, one in which the working gloves were periodically replaced (PRG) with new gloves, and another in which the gloves were not replaced (NRG). In the PRG group, gloves were replaced every 2 h during 8 h of processing. Food pathogenic bacteria Escherichia coli, Salmonella species, and Listeria monocytogenes were not found in any samples, including gloves and shucked oysters. However, Staphylococcus aureus (SA) was detected in some samples, and the contamination levels were correlated with the working time and the regular replacement of gloves. SA was not detected on gloves or oysters of the PRG group. However, it was detected in the range of <$15CFU/15cm^2$ to $2.9{\times}10^2CFU/15cm^2$ on gloves after 6 h of continuous work, and from <$15CFU/15cm^2$ to $2.23{\times}10^2CFU/15cm^2$ on oysters after 8 h. These results indicate that the SA contamination in shucked oysters originated from the working gloves, and that replacement of working gloves every 2-4 h will minimize SA contamination in oyster products.

• Solar Energy
• /
• v.15 no.3
• /
• pp.105-117
• /
• 1995

Heat transfer coefficients on a single spiral coil tube in the furan foundry sand fluidized bed have been investigated. Heat transfer coefficients(ho) to an immersed single spiral coil tube were measured in the bed. The bed diameter was 0.21 m. The following quantities were varied: (l)bed temperature, (2)mean particle diameter, (3) fluidization rate, (4)the ratio of heated coil tube pitch to diameter(p/Do), and (5)the ratio of heated coil tube pitch to mean particle diameter(p/dp). In addition, the experimental values of maximum Nusselts number were compared with the values of maximum Nusselts number predicted by the existing correlations. The values of heat transfer coefficient increase with the increase in bed temperature and fluidization rate, but decrease with increase in particle diameter. An empirical formulus of maximum Nusselts number which is applicable in the furan foundry sand fluidization bed is as follows: $$Nu_{max}=1.01\;Re^{0.48}Prg^{0.4}(p/dp)^{0.28}(p/Do)^{0.05}$$.

• Journal of the Semiconductor & Display Technology
• /
• v.22 no.1
• /
• pp.64-71
• /
• 2023

In this study, we investigated the effects of BiAlSiO glass composition on its glass forming range, thermal properties, and plasma resistance. The results showed that increasing the Al2O3 content suppressed the tendency for crystallization and hindered glass formation beyond a certain threshold. Bi2O3 was found to increase the content of non-bridging oxygen, resulting in a decrease in glass transition temperature and an increase in thermal expansion coefficient. Furthermore, the etching rate was found to improve with increasing Al2O3 content but decrease with increasing SiO2 content. It was concluded that the boiling point of fluorinated compounds should be considered to 900℃. Therefore, this study is expected to contribute to the understanding of the properties of BiAlSiO glass and its application to low temperature melting PRG compositions.

• Journal of the Korean Wood Science and Technology
• /
• v.48 no.2
• /
• pp.245-252
• /
• 2020

This study was performed to analyze the mechanical properties of tropical hybrid cross-laminated timber (CLT) with bamboo laminated board as the core layer in order to evaluate the possibility of its use as a CLT material. Bamboo board was used as the core layer and the tropical species Acacia mangium willd., from Indonesia, was used as the lamination in the outer layer. The modulus of elasticity (MOE), modulus of rupture (MOR), and shear strength of the hybrid CLT were measured according to APA PRG 320-2018 Standard for Performance-Rated Cross-Laminated Timber. The results show that the bending MOE of the hybrid CLT was found to be 2.76 times higher than SPF (Spruce Pine Fir) CLT. The reason why the high MOE value was shown in bamboo board and hybrid CLT applied bamboo board is because of high elasticity of bamboo fiber. However, the shear strength of the hybrid CLT was 0.8 times lower than shear strength of SPF CLT.

• Journal of the korean academy of Pediatric Dentistry
• /
• v.37 no.4
• /
• pp.429-437
• /
• 2010

The aim of this study was to evaluate the fluoride release and microhardness of Beautifil II as giomer(Group I), F2000 Compomer as compomer(Group II), GC Fuji II LC Capsule as resin-modified glass ionomer(Group III) and $Filtek^{TM}$ Z350 as composite resin(Group IV) according to time. Forty discs(5 mm diameter and 2 mm height) were prepared for each material. Each disc was immersed in 3 ml of de-ionized water within polyethylene tube and stored at $37^{\circ}C$. Evaluations were performed by pH/ISE meter for analysis of fluoride release and hardness testing machine for analysis of microhardness over 31 days. The results can be summarized as follows : 1. For all groups except group IV, the greatest fluoride release was observed after the first day of the study period and then dramatically diminished over time. On the 7th day of the study period, fluoride release level was stabilized. 2. Group III showed the highest fluoride release among test groups and then group II, group I were followed. Significant difference in cumulative fluoride release over 31 days was found between each groups. Group IV showed no fluoride release during study period. 3. Group IV showed the highest microhardness among test groups and then group I, group II, group III were followed. Significant difference in microhardness was found between each group, except between group I and group II. 4. After 31 days, microhardness was slightly diminished in every group. However, no significant difference was found.

• Journal of The Korean Society of Grassland and Forage Science
• /
• v.37 no.2
• /
• pp.132-139
• /
• 2017

This study was conducted to find out the effects of over seeding using new grass varieties orchardgrass 'Kordione' and 'Onnuri', and tall fescue 'Greenmaster' on botanical composition and dry matter productivity from 2013 to 2016 in low productivity hilly pasture, middle area of Korea. There were used 3 grass seed mixture types made of different compositions and amounts {T1: control - no over seeding, T2: tall fescue (TF) 'Greenmaster' $18kg\;ha^{-1}$, orchardgrass (OG) 'Kordione' $9kg\;ha^{-1}$, Perennial ryegrass (PRG) 'Linn' $5kg\;ha^{-1}$, and Kentucky bluegrass (KBG) 'Kenblue' $2kg\;ha^{-1}$, T3: TF 'Greenmaster' $9kg\;ha^{-1}$, OG 'Kordione' $18kg\;ha^{-1}$, PRG 'Linn' $5kg\;ha^{-1}$, and KBG ' Kenblue' $2kg\;ha^{-1}$, T4: TF 'Greenmaster' $9kg\;ha^{-1}$, OG 'Onnuri' $18kg\;ha^{-1}$, PRG 'Linn' $5kg\;ha^{-1}$, and KBG 'Kenblue' $2kg\;ha^{-1}$}. In the botanical composition of grassland, T1 nearly remained constant in other seasons while ratio of weeds were increased in summer season. T2 was better than control (T1) in portion of grass ratio, which has increased by 80%. In the early time of establishment, the portions of OG were increased in T2, but TF rate was increased after 3 years later when grass was established. T3 and T4 showed a very similar patterns, grass ratio had increased by 80% and the portion of KBG had increased as time passed. T2 ($129,763kg\;ha^{-1}$) was showed the highest dry matter yield than other treatments (T1: $6,756kg\;ha^{-1}$, T3: 9641, and T4: 10,738) in 2016.

• Journal of Periodontal and Implant Science
• /
• v.47 no.2
• /
• pp.66-76
• /
• 2017

Purpose: Oral wound healing requires gingival fibroblasts to respond to local growth factors. Epigenetic silencing through DNA methylation can potentially decrease the responsiveness of gingival fibroblasts to local growth factors. In this study, our aim was to determine whether the inhibition of DNA methylation sensitized gingival fibroblasts to transforming growth factor-${\beta}1$ (TGF-${\beta}1$). Methods: Gingival fibroblasts were exposed to 5-aza-2'-deoxycytidine (5-aza), a clinically approved demethylating agent, before stimulation with TGF-${\beta}1$. Gene expression changes were evaluated using quantitative polymerase chain reaction (PCR) analysis. DNA methylation was detected by methylation-sensitive restriction enzymes and PCR amplification. Results: We found that 5-aza enhanced TGF-${\beta}1$-induced interleukin-11 (IL11) expression in gingival fibroblasts 2.37-fold (P=0.008). 5-aza had no significant effects on the expression of proteoglycan 4 (PRG4) and NADPH oxidase 4 (NOX4). Consistent with this, 5-aza caused demethylation of the IL11 gene commonly next to a guanosine (CpG) island in gingival fibroblasts. The TGF-${\beta}$ type I receptor kinase inhibitor SB431542 impeded the changes in IL11 expression, indicating that the effects of 5-aza require TGF-${\beta}$ signaling. 5-aza moderately increased the expression of TGF-${\beta}$ type II receptor (1.40-fold; P=0.009), possibly enhancing the responsiveness of fibroblasts to TGF-${\beta}1$. As part of the feedback response, 5-aza increased the expression of the DNA methyltransferases 1 (DNMT1) (P=0.005) and DNMT3B (P=0.002), which are enzymes responsible for gene methylation. Conclusions: These in vitro data suggest that the inhibition of DNA methylation by 5-aza supports TGF-${\beta}$-induced IL11 expression in gingival fibroblasts.

• Journal of Microbiology and Biotechnology
• /
• v.23 no.12
• /
• pp.1664-1672
• /
• 2013

In Salmonella enterica serovar Typhimurium, many genes encoded within Salmonella pathogenicity island 1 (SPI1) are required to induce intestinal/diarrheal disease. In this study, we compared the expression of four SPI1 genes (hilA, invF, prgH, and sipC) under shaking and standing culture conditions and found that the expression of these genes was highest during the transition from the exponential to stationary phase under shaking conditions. To identify regulators associated with the stationary phase-dependent activation of SPI1, the effects of selected regulatory genes, including relA/spoT (ppGpp), luxS, ihfB, hfq, and arcA, on the expression of hilA and invF were compared under shaking conditions. Mutations in the hfq and arcA genes caused a reduction in hilA and invF expression (more than 2-fold) in the early stationary phase only, whereas the lack of ppGpp and IHF decreased hilA and invF gene expression during the entire stationary phase. We also found that hfq and arcA mutations caused a reduction of hilD expression upon entry into the stationary phase under shaking culture conditions. Taken together, these results suggest that Hfq and ArcA regulate the hilD promoter, causing an accumulation of HilD, which can trigger a stationary phase-dependent activation of SPI1 genes under shaking culture conditions.