• Bulletin of the Korean Chemical Society
• /
• 제25권5호
• /
• pp.652-656
• /
• 2004

A new luminescent polymer, poly{1,4-phenylene-1,2-ethenediyl-2'-[2"-(4'"-octyloxyphenyl)-(5"-yl)-1",3",4"-oxadiazole]-1,4-phenylene-1,2-ethenediyl-2,5-bis-dodecyloxy-1,4-phenylene-1,2-ethenediyl} (Oxd-PPV), was synthesized by the Heck coupling reaction. Electron withdrawing pendant, conjugated 1,3,4-oxadiazole (Oxd), is on the vinylene unit. The band gap of the polymer figured out from the UV-visible spectrum was 2.23 eV and the polymer film shows bright yellow emission maximum at 552 nm. The electroluminescence (EL) maximum of double layer structured device (ITO/PEDOT:PSS/Oxd-PPV/Al) appeared at 553 nm. Relative PL quantum yield of Oxd-PPV film is 3.6 times higher than that of MEH-PPV film. The HOMO and LUMO energy levels of Oxd-PPV figured out from the cyclic voltammogram and the UV-visible spectrum are -5.32 and -3.09 eV, respectively, so that more balanced hole and electron injection efficiency can be expected compared to MEH-PPV. A double layer EL of Oxd-PPV has an maximum efficiency of 0.15 cd/A and maximum brightness of 464 cd/$m^2$.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1994년도 추계학술대회 논문집 학회본부
• /
• pp.219-221
• /
• 1994

Oil-soluble poly(p-phenylene(1-methoxyethylene)), as a precursor of poly(p-phenylenevinylene) (PPV), was synthesized add identified with NMR and FT-IR spectroscopy. The PPV films were prepared by PPV precursor films with a thermal treatment at $250^{\circ}C$ under vacuum, where the PPV precursor films wets formed on various substrates by using Langmuir-Blodgett(LB) method. The characterization of these films was carried out by FT-IR spectroscopy, UV-VIS absorption spectroscopym, and photoluminescence (PL). Atomic Force Microscopy (AFM) has been used to investigate He surface morphology of PPV films.

• Bulletin of the Korean Chemical Society
• /
• 제29권1호
• /
• pp.139-147
• /
• 2008

New PPV derivatives which contain electron-withdrawing CF3F4phenyl group, poly[2-(2-ethylhexyloxy)-5-(2,3,5,6-tetrafluoro-4-trifluoromethylphenyl)-1,4-phenylenevinylene] (CF3F4P-PPV), and poly[2-(4-(2-etylhexyloxy)-phenyl)-5-(2,3,5,6-tetrafluoro-4-trifluoromethylphenyl)-1,4-phenylenevinylene] (P-CF3F4P-PPV), have been synthesized by GILCH polymerization. As the result of the introduction of the electron-withdrawing CF3F4phenyl group to the phenyl backbone, the LUMO and HOMO energy levels of CF3F4P-PPV (3.14, 5.50 eV) and P-CF3F4P-PPV (3.07, 5.60 eV) were reduced. The PL emission spectra in solid thin film are more red-shifted over 50 nm and increased fwhm (full width at half maximum) than solution conditions by raising aggregation among polymer backbone due to electron withdrawing effect of 2,3,5,6-tetrafluoro-4-trifluoromethylphenyl group. The EL emission maxima of CF3F4P-PPV and P-CF3F4P-PPV appear at around 530-543 nm. The current density-voltage-luminescence (J-V-L) characteristics of ITO/PEDOT/polymer/Al devices of CF3F4P-PPV and P-CF3F4P-PPV show that turn-on voltages are around 12.5 and 7.0 V, and the maximum brightness are about 82 and 598 cd/m2, respectively. The maximum EL efficiency of P-CF3F4P-PPV (0.51 cd/A) was higher than that of CF3F4P-PPV (0.025 cd/A).

• 한국광학회지
• /
• 제17권5호
• /
• pp.461-468
• /
• 2006

MEH-PPV/DFPP 혼합물의 고분자 박막에서 광학적 특성들이 최초로 조사되었다. 여기서 사용된 BFPP(N, N'-diperfluorophenyl-3,4,9,10-perylenetetracarboxylic diimide)는 새로운 n형 고분자인데 공기 중에서 안정성이 우수하고 일반 용매에서 잘 용해되었다. 1:19 DFPP:MEH-PPV 혼합물의 경우 매우 효율적인 형광소멸이 관측되었다. 더불어 이 MEH-PPV/DFPP 광전 셀의 광전류 응답특성들이 측정되었다. 빛의 세기가 $50mW/cm^2$일 때 단락전류 밀도는 단일 층의 MEH-PPV 소자들보다 2배 이상 되었다.

• Macromolecular Research
• /
• 제9권2호
• /
• pp.116-121
• /
• 2001

A series of poly(1,4-phenylenevinylene-alt-3-alkyl-2,5-thienylenevinylene)s (alkyl = hexyl [PPV-alt-6-TV] and octyl (PPV-alt-8-TV] group) have been synthesized by the Heck coupling reaction. These polymers were characterized using $^1$H-NMR, FT-IR spectroscopy, and thermogravimetric analysis (TCA). They are solvent processible and have obviously copolymeric structure. The photophysical properties of the polymers were investigated using UV-visible and steady-state photoluminescence(PL) spectroscopy. We studied the change of light-emitting properties by incorporating the thiophene group into the PPV polymer backbone using alternating copolymer system. The properties of two synthesized polymers are very similar, but they exhibited apparent changes of light-emitting properties compared with other PPV backbone based polymers. The broad absorption bands from 350 to 570 nm are due to $\pi$-$\pi$* transitions of the polyconjugated systems. The absorption maxima of the two polymers were found at about 452 and 448 nm for PPV-alt-6-TV and PPV-alt-8-TV, respectively. The copolymers showed broad PL spectra between 550 and 700 nm without vibronic bands and PL emission maxima of PPV-alt-6-TV and PPV-alt-8-TV are about 620 and 605 nm, respectively. The copolymers exhibited the red emission (PPValt-6-TV), but more red shifted emissions are needed to obtain real red color.

• 대한수의학회지
• /
• 제44권2호
• /
• pp.279-286
• /
• 2004

Total 160 head of porcine kidneys were examined for gross and histopathological lesions and polymerase chain reaction (PCR) for porcine circovirus type 2 (PCV-2), porcine parvovirus (PPV), Leptospira species and porcine reproductive and respiratory syndrome virus (PRRSV). Grossly, 137 kidneys (85.6%) had lesions characterized by the presence of the scattered white foci. Microscopically, multifocal interstitial nephritis, which classified into 4 grades such as, no lesion (Score 0), mild lesion (Score 1), moderate lesion (Score 2) and severe chronic lesion (Score 3) with fibrosis, was observed in 159 cases (99.4%). The histopathologic mean score for multifocal interstitial nephritis was significantly different (P<0.05) between the cases of PCV-2 single infection and the cases of co-infection with PCV-2 and PPV. According to PCR evaluation, PCV-2 were detected in 73.8% (118 cases), PPV were in 66.9% (107 cases), however Leptospira spp. and PRRSV were negative in all kidneys. Both PCV-2 and PPV were detected in 52.5% (84 cases). In 84 cases co-infected with PCV-2 and PPV, the occurrence of lymphoid follicle and vasculitis were observed as 65.5% (55 cases) and 26.2% (22 cases), respectively. These results revealed that PCV-2 and PPV were major infectious agents for interstitial nephritis in slaughtered pigs, Jeju. And the histopathologic lesions of multifocal interstitial nephritis were more severe in the case co-infected with PCV-2 and PPV.

• Annals of Clinical Neurophysiology
• /
• 제24권1호
• /
• pp.7-16
• /
• 2022

Background: There is inadequate information on the validation of diabetic microvascular complications in the Korean National Health Insurance Service data set. We aimed to validate the diagnostic algorithms regarding the nephropathy, neuropathy, and retinopathy of diabetes. Methods: From various secondary and tertiary medical centers, we selected 6,493 patients aged ≥ 40 years who were diagnosed with diabetic microvascular complications more than once based on codes in the 10th version of the International Classification of Diseases (ICD-10). During 2019 and 2020, we randomly selected the diagnoses of 200 patients, 100 from each of two hospitals. The positive predictive value (PPV), negative predictive value, error rate, sensitivity, and specificity were determined for each diabetic microvascular complication according to the ICD-10 codes, laboratory findings, diagnostic studies, and treatment procedure codes. Results: Among the 200 patients who visited the hospital more than once and had the diagnostic codes of diabetic microvascular complications, 142, 110, and 154 patients were confirmed to have the gold standard of diabetic nephropathy (PPV, 71.0%), diabetic neuropathy (PPV, 55.0%), and diabetic retinopathy (PPV, 77.0%), respectively. The PPV and specificity of diabetic nephropathy (PPV, 71.0-81.4%; specificity, 10.3-53.4%), diabetic neuropathy (PPV, 55.0-81.3%; specificity, 66.7-76.7%) and diabetic retinopathy (PPV, 77.0-96.6%; specificity, 2.2-89.1%) increased after combining them with the laboratory findings, diagnostic studies, and treatment procedures codes. These change trends were observed similarly for both hospitals. Conclusions: Defining diabetic microvascular complications using ICD-10 codes and their related examination codes may be a feasible method for studying diabetic complications.

• 한국고분자학회:학술대회논문집
• /
• 한국고분자학회 2006년도 IUPAC International Symposium on Advanced Polymers for Emerging Technologies
• /
• pp.277-277
• /
• 2006

Conducting polymers (e.g. poly[2-methoxy-5-(2'-ethyl-hexyloxy)-1,4-phenylen vinylene] (MEH-PPV)) confined in one-dimensional nanoscale channels of mesoporous materials, are expected to lead the novel applications for electroconductive and optoelectronic devices. We investigated the adsorption behavior of MEH-PPV on organically surface-modified mesoporous silica (FSM-16) and mesoporous organosilica. The amount of the confined MEH-PPV was found to strongly depend on the surface modifications of the mesoporous materials. The optical absorption edge of the confined MHE-PPV was clearly blue-shifted when compared to that of a free MHE-PPV.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2001년도 추계학술대회 논문집 Vol.14 No.1
• /
• pp.112-116
• /
• 2001

Organic Electroluminescence device, which have the single-layer structure of ITO(indium-tin-oxide)/MEH-PPV (Poly[2-(2'-ethylhexyloxy )-5-methoxy-1,4-pheny lenevinylene])/Al(aluminium) and ITO/MEH-PPV/$Alq_3$(tris-8-hydroxyquinolinato aluminium)/Al were fabricated and electrical properties were investigated. Experimental results, in single-layer structure, shown that turn on voltage is about 12 V, and current density increases as a function of increasing temperature. It was explained by thermionic emission. In double-layer structure, thickness $200\AA$ of $Alq_3$ is shown electrical properties that turn on voltage is about 11 V, and current density decreases as a function of increasing temperature.ࠀȀ 耀Ѐ€

• Transactions on Electrical and Electronic Materials
• /
• 제13권6호
• /
• pp.317-321
• /
• 2012

Poly[4,4'(3,3')-biphenylenevinylene-alt-2-methoxy-5-(2-ethylhexyloxy)-1,4-phenylene-vinylene], 4,4'(3,3')-PBPMEH-PPV, and poly[4,4'(3,3')-biphenylenevinylene-alt-N-ethylhexyl-3,6-carbazolevinylene], 4,4'(3,3')-PBPCAR-PPV, of varying effective conjugation lengths, were synthesized by the well-known Wittig condensation polymerization between the appropriate biphenyl diphosphonium salts and dialdehyde monomers such as carbazole or dialkoxyphenyl dialdehyde. The conjugation lengths of the polymers were controlled by biphenyl linkages (4,4' or 3,3'). The resulting polymers were highly soluble in common organic solvents and exhibited good thermal stability up to $300^{\circ}C$. The synthesized polymers showed UV-visible absorbance and photoluminescence (PL) in the ranges of 314-400 nm and 430-507 nm, respectively. Carbazole and 3,3'-biphenyl containing 3,3'-PBPCAR-PPV showed a blue PL peak at 430 nm. A single-layer light-emitting diode was fabricated in a configuration of ITO/polymer/Al. Electroluminescence (EL) emission of 3,3'-PBPCAR-PPV was shown at 455 nm.