• Development and Reproduction
• /
• v.24 no.3
• /
• pp.215-224
• /
• 2020

Seawater adaptability of steelhead trout increases along with the increase in the size of the fish, independent of parr-smolt transformation. Three 96 h seawater challenge tests were conducted to determine the size at which seawater adaptability of steelhead trout develops. Plasma Na⁺ and Cl^- levels, moisture content, gill Na⁺/K⁺ ATPase activity, and mortality during the 96 h after direct transfer to seawater (32 ppt) were determined. Plasma Na⁺ and Cl^- levels in 50 g fish continuously increased during the 96 h after the transfer to seawater (p<0.05), but the levels in 100 and 150 g fish leveled off after 24 h (p<0.05). Both 100 and 150 g size steelhead trout maintained muscle moisture content (%) better than 50 g size fish (p<0.05). Gill Na⁺/K⁺ ATPase activity in the 100 g size group increased in a time-dependent manner after transfer to seawater (p<0.05), whereas activity in the 50 and 150 g sizes did not increase (p>0.05), for which a possible explanation was discussed. A mere 2.6% mortality in both the 50 and 150 g size groups was observed. In conclusion, the current results indicate that 50 g size steelhead trout did not show development of a high level of hypoosmoregulatory capacity, whereas fish in the 100 and 150 g size groups showed a high level in our experimental conditions. Therefore, the steelhead trout larger than a 100 g size is recommended for transfer to seawater culture.

• Journal of the Korean Society for Aeronautical & Space Sciences
• /
• v.33 no.3
• /
• pp.93-98
• /
• 2005

STSAT-2 will be launched on December 2007 by the first Korean launch vehicle KSLV-1, and its one of the main instruments is DREAM (Dual Channel Radio Frequency and Environment Atmosphere Monitoring) which detects a signal for atmosphere from the Earth by using micro-wave signal. The STSAT-2 has many units for technology demonstration such as FDSS (Fine Digital Sun Sensor) and DHST (Dual Head Star Tracker) including PPT (Pulsed Plasma Thruster) for attitude control and momentum dumping in the space. In this paper, the power budget analysis for STSAT-2 will be studied and provided for supporting the whole mission life time during the mission of its spacecraft.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.5 no.4
• /
• pp.692-698
• /
• 2001

The radio communications by SSB and VHF transceivers are still used very efficiently in coast stations and military base stations. The communication system by the conventional SSB and VHF transceivers between a coast station and a terminal is an one-to-one system. In this dissertation, however, the conventional one-to-one system is expanded to one-to-multiple systems. Then, frequencies can be used effectively for distress, urgency, safety traffic, and military communications. An ICS has been proposed and added, in this dissertation, to the conventional SSB and VHF communication systems, which can realize one-to- several terminal communications. The line switching system by the ICS is to be remote-controlled by ASK modulated PTT signals and audio signals. An ICS can change a connection between terminal and transceiver through a circuit switching system at any time. For this purpose, the author has researched and developed a ASK transmission system, ICS system, control algorithm, multiprocessor system, and moni-toring system. As a conclusion, the developed line switching control systems and equipments can be used effectively for maritime communication, military communication, fishery communication, etc.

• The Transactions of the Korea Information Processing Society
• /
• v.6 no.2
• /
• pp.385-395
• /
• 1999

Video-On-demand system provides electronic video rental services from remote video servers on a broadband communication networks. When we assume some situation that serve the same video stream by batching, each time single video stream became available at server-end side, we face the problem that what video stream to be scheduled at what time instant. Hence, in order to manage the resource bandwidth which is different at each stream, the policy of channel allocation became important factor. In this work, we proposed three type of scheduling policies with queueing, as are cumulative Waiting Time(CWT), Mean Waiting Time(MWT) and Predictable Popular Factor(PPF). While CWT policy is good for popular video, MWT policy was good for non-popular video. Also, we know that PPT policy has some fairness for average wait time and reneging rate of user requests.

• Journal of Korean Physical Therapy Science
• /
• v.26 no.2
• /
• pp.51-60
• /
• 2019

Background: The purpose of this study was to investigate the effects of HBOT (hyperbaric oxygen therapy) on the pain, ROM (range of motion) and muscle fatigue recovery of DOMS (delayed onset muscle soreness). Design: Randomized Controlled Trial. Methods: Twenty-six subjects who are student in their 20s at a university participated in this study, these subjects were assigned into two groups, a control group (n=12) and an experiment group (n=14). The subjects in experimental group were intervened by HBOT (40 minutes, 1.3 ATA), while ones on control group weren't by any intervention after induced DOMS. Results: First, in the comparison of VAS (visual analog scale), there were significant variations with the period (p<0.001), interaction of period (p<0.05) and group (p<0.05). In the comparison of PPT (pressure pain threshold), there were significant variations with the period (p<0.001) and interaction of period (p<0.05). Second, in the comparison of ROM, there were significant variations with the period (p<0.001), interaction of period (p<0.001) and group (p<0.01). Third, in the comparison of CK (creatine kinase) and LDH (lactate dehydrogenase), there no signigicant variations with all measure variables. Conclusion: The above results indicated that HBOT were effective to decrease the pain and improve the ROM in DOMS. Also the statistical significant variations of blood factors of muscle fatigue were not found in this.

• Elastomers and Composites
• /
• v.41 no.4
• /
• pp.223-230
• /
• 2006

Rubber compounds have a high viscoelastic property. One of the viscoelastic behaviors during profile extrusion is the swelling of extrudate, and the amount of swelling varies with operational conditions in extrusion. It is well recognized that the elastic portion in the viscoelastic property plays an important role in the extrudate swell. In this study computer simulation of the die swell at the capillary die for several rubber compounds has been performed using commercial CFD code, Polyflow. A non-linear differential viscoelastic model, Phan-Thien-Tanner (PTT) model, was used in the computer simulation. Non-isothermal behavior was considered in the calculation. Distribution of pressure, velocity and temperature in the reservoir and capillary die, and extrudate profiles were predicted through the simulation. The amount of the die swell fur the different rubber compounds was investigated for various flow rates and three types of length to diameter of the capillary die. It is concluded that the PTT model successfully represented viscoelastic behavior of rubber compounds.

• Journal of the Korean Society of Physical Medicine
• /
• v.13 no.4
• /
• pp.113-121
• /
• 2018

PURPOSE: This study was conducted to identify a more effective intervention in sling and resistance exercise for chronic low back pain patients. METHODS: Seventy (70) subjects were randomly divided into the sling group (SG) and resistance exercise group (REG). Muscular activity of the internal oblique (IO), external oblique (EO), rectus abdominis (RA), and pelvic rotation angle during active straight leg raise (ASLR), a pressure pain threshold (PPT) and a visual analog scale (VAS) were measured. Sling and resistance exercises were conducted for 12 weeks. Intermediate measurements were taken after 8 weeks and final measurements were taken after 12 weeks. RESULTS: Both groups showed significantly decreased RA muscle activity and significantly increased IO muscle activity (p<.05). Additionally, EO muscle activity was significantly decreased in the REG, but significantly increased in the SG (p<.05), while the pelvic rotation angle and VAS were significantly decreased in the SG (p<.05). The pressure pain threshold was significantly increased in both groups (p<.05). CONCLUSION: Based on the results of this study, a 12-week intervention seems to be effective at improving back pain in both groups. However, a lower VAS was seen in the sling group after 8 weeks of intervention. Therefore, it is recommended that the sling be applied first when establishing a chronic back pain treatment program to shorten the treatment period and reduce the pain period.

• Journal of Korea Foundry Society
• /
• v.39 no.1
• /
• pp.7-13
• /
• 2019

Few studies of large blooms over 700 mm thick among those used for the forging of raw materials have been reported. The cooling rate difference between the surface and the center of a large bloom is large, and the degradation of the mechanical properties is likely in cases involving excessively coarse precipitates resulted from the slow cooling rate of a large bloom after casting. Therefore, a schematic investigation of the growth behaviors of precipitates while varying their locations in blooms is necessary. The dissolution behaviors of precipitates were investigated by simulating a reheating process during which the bloom is heated to a high temperature. The segregation behavior of the as-cast large bloom was also investigated. Reheating specimens were obtained after an isothermal heat treatment at $1150^{\circ}C$ with various holding times to simulate the reheating process, with the samples undergoing a subsequent water quenching step. The precipitates were extracted using an electrolytic extractor and a particle size analysis was conducted with the aid of SEM, EDS, and TEM. In the present work, Al oxide, MnS and Nb carbide were mainly observed.

• Korean Journal of Ichthyology
• /
• v.31 no.1
• /
• pp.23-29
• /
• 2019

The embryonic development and hatchability of the artificially fertilized eggs of convict grouper (Hyporthodus septemfasciatus) ♀${\times}$giant grouper (Epinephelus lanceolatus) ♂ (CGGG) were compared to those of the maternal pure species (convict grouper ♀${\times}$♂, CG) to establish a novel grouper hybrid for aquaculture industry. The fertilized eggs were divided into nine 5-L beakers (3,000~5,000 eggs/beaker) filled with UV sterilized seawater and incubated at a temperature range of $23.5{\sim}24.8^{\circ}C$ (32.1~32.8 psu). The percentages of fertilization and hatching of CGGG were $69.4{\pm}1.5%$ and $59.0{\pm}5.1%$, respectively and were significantly lower than those of CG (p<0.05). The CGGG proceeded normal embryonic development similar to that of CG, but showed an irregular cleavage, immature embryonic body and spinal deformity in hatched larvae. The incubation time from fertilization to hatching of CGGG was 31 hrs, which was approximately 2 hrs slower than that of CG. Our study provided the possibility of mass production of grouper hybrid CGGG larvae.

• Journal of Engineering Education Research
• /
• v.24 no.4
• /
• pp.21-29
• /
• 2021

The objective of this research is to devise a BARS evaluation system as a performance evaluation plan for non-face-to-face capstone design and to verify the validity through the expert FGI as the remote education is highlighted as a new normal standard in the post corona epoch. The conclusion of this research is as follows. First, the non-face-to-face capstone design is a competency centered subject that allows you to develop the engineering and majoring knowledge and its function and attitude, and the achievement of program outcome is the objective competency, and the researcher proposes the BARS method evaluation, one of competency evaluation method, as a new performance evaluation plan. Second, for the evaluation of PO achievement of non-face-to-face capstone design, the researcher deduced 20 behavior identification standard(anchor) of BARS evaluation system, and developed the achievement standard per 4 levels. Third, as the evaluation tool of non-face-to-face capstone design, the presentation data(PPT), presentation video, product such as trial product(model), non-face-to-face class participation video, discussion participating video, team activity report, and result report for the evidential data of BARS evaluation were appeared as proper. Finally, the BARS evaluation plan of non-face-to-face capstone design would be efficiently made through the establishment of evaluation plan, the establishment of grading standard of BARS evaluation scale, the determination of evaluation subject and online BARS evaluation site.