• 대한조선학회논문집
• /
• 제44권6호
• /
• pp.647-656
• /
• 2007

Simulation model of outdoor block movement of shipyard is implemented in this paper. The load of the outdoor workshops in a shipyard influences a mid-term planning and scheduling of the shipyard. Since the load analysis is expected in advance before confirming the planning and scheduling, a discrete event simulation (DES) may be a good solution. The accuracy of DES is up to the accurate modeling of Products, Processes, and Resources (PPR) included in a system. PPR in the outdoor system are clearly defined and the simulation model for the outdoor logistics is implemented by modeling the selective PPR with the help of a DES tool which is programmable by users. The simulation model is verified by comparing the results with the real shipyard data. The outputs through the simulation are discussed.

• 수산해양기술연구
• /
• 제52권3호
• /
• pp.220-231
• /
• 2016

Yield-per-recruit (YPR) analysis is used to provide management guidance for the efficient use of a fish cohort. However, the individual fish price per unit weight of small yellow croaker (Larimichthys polyactis) or hairtail (Trichiurus lepturus) increases dramatically by size in Korea. Therefore, age-based production value-per-recruit (PPR) analysis has recently been developed (Zhang et al., 2014). Since age determination requires a substantial amount of money and time and it is even impossible for some fish species, it is difficult to obtain age information to apply the age-based PPR model. Thus, we attempted to develop an alternative method, which uses length data rather than age information, called the length-based PPR analysis. The results revealed that length-based PPR analysis was much more conservative for stock management than the YPR analysis. Furthermore, the PPR analysis was more economically beneficial than the YPR analysis, which can prevent the fish stock from the economic overfishing. In conclusion, the length-based PPR analysis could be a proper approach for stock assessment in the case that the individual fish price per unit weight increases dramatically by size, and this analysis is useful to obtain vital management parameters under data-deficient situation when traditional stock assessment methods are not applicable.

• ETRI Journal
• /
• 제38권4호
• /
• pp.714-723
• /
• 2016

Considerable attention has been given to processing graph data in recent years. An efficient method for computing the node proximity is one of the most challenging problems for many applications such as recommendation systems and social networks. Regarding large-scale, mutable datasets and user queries, top-k query processing has gained significant interest. This paper presents a novel method to find top-k answers in a node proximity search based on the well-known measure, Personalized PageRank (PPR). First, we introduce a distribution state transition graph (DSTG) to depict iterative steps for solving the PPR equation. Second, we propose a weight distribution model of a DSTG to capture the states of intermediate PPR scores and their distribution. Using a DSTG, we can selectively follow and compare multiple random paths with different lengths to find the most promising nodes. Moreover, we prove that the results of our method are equivalent to the PPR results. Comparative performance studies using two real datasets clearly show that our method is practical and accurate.

• 한국지반환경공학회 논문집
• /
• 제18권10호
• /
• pp.5-14
• /
• 2017

In recent years, world has witnessed many man-made activities related to both above and underground blasts. Details on behaviour of shallow foundations subjected to blast loads and induced liquefaction is scarce in literature. In this paper, typical shallow strip foundation in saturated cohesionless soils subjected to both above and underground blasting have been simulated by using finite difference based numerical model FLAC3D. Peak particle velocity (PPV) has been obtained to propose critical values for which bearing capacity failure for shallow foundations with soil liquefaction can occur. Typical results for pore pressure ratio (PPR) for various scaled distances are compared to PPR values obtained by using empirical equation available in literature which shows good agreement. Critical design values obtained in the present study for PPV and PPR to estimate the scaled distance, bearing capacity failure and liquefaction susceptibility can be used effectively for design of shallow strip foundation in cohesionless soil subjected to both above and under ground blast loads.

• 한국전산구조공학회논문집
• /
• 제32권5호
• /
• pp.297-304
• /
• 2019

본 논문에서는 접착영역 모델을 이용하여 2상 리튬이온 충전 시 실리콘 음극 전극의 균열진전 해석을 수행하였다. 리튬화 실리콘은 결정질 실리콘에 비해 부피가 약 3배 이상 크므로 리튬이온 충전 시 외각의 리튬화 실리콘에 매우 큰 압축력이 작용하여 압축항복이 발생한다. 리튬이온 충전 시 외각의 리튬화 실리콘은 압축항복 후에 내부의 결정질 실리콘이 리튬화 실리콘으로 상 변이하면서 발생하는 부피 팽창으로 인해 인장력이 작용한다. 이러한 인장력으로 인해 발생하는 균열진전을 접착영역 모델을 이용하여 모사하였다. 사용한 접착영역 모델은 PPR 포텐셜 기반 접착영역 모델로 하나의 포텐셜을 사용하여 복합모드에 대해서도 에너지 소산에 일관성을 지니고 있다. 유한요소 수치해석 모델로 2상 리튬이온 충전 시 모서리 균열진전을 모사한 결과가 실제 실험결과와 일치함을 확인하였고, 균열 팁에서의 최대 인장응력의 각도를 분석하여 실제 실험처럼 균열진전 방향이 회전할 것을 예측할 수 있었다.

• Steel and Composite Structures
• /
• 제51권2호
• /
• pp.173-183
• /
• 2024

This study investigates a new seismic retrofit system that utilizes rotational friction dampers and axial springs. The retrofit system involves a steel frame with rotational friction dampers (RFD) at beam-column joints and linear springs at the corners, providing energy dissipation and self-centering capabilities to existing structures. The axial spring acts as a self-centering mechanism that eliminates residual deformations, while the friction damper mitigates seismic damage. To evaluate the seismic performance of the proposed retrofit system, a series of cyclic loading tests were carried out on a steel beam-column subassembly equipped with the proposed devices. An analytical model was then developed to validate the experimental results. A performance point ratio (PPR) was presented to optimize the design parameters of the retrofit system, and a performance-based seismic design strategy was developed based on the PPR. The retrofit system's effectiveness and the presented performance-based design approach were evaluated through case study models, and the analysis results demonstrated that the developed retrofit system and the performance-based design procedure were effective in retrofitting structures for multi-level design objectives.

• Communications for Statistical Applications and Methods
• /
• 제9권1호
• /
• pp.213-220
• /
• 2002

Anthropometric survey is important as a basis for human engineering fields. According to our experiences, there are difficulties in obtaining the measurements of some body parts because respondents are reluctant to expose. In order to overcome these difficulties, we propose a method for estimating such hard-to-measure measurements by using easy-to-measure measurements those are closely related to them. Multiple Regression Model, Feedforward Neural Network(FNN) Model and Projection Pursuit Regression(PPR) Model will be used as analytical tools for this purpose. The method we propose will be illustrated with real data from the 1992 Korea national anthropometric survey.

• 대한조선학회논문집
• /
• 제43권3호
• /
• pp.392-398
• /
• 2006

A prototype of MES(Manufacturing Execution System) applied to panel assembly shop is implemented by using PDA(Personal Digital Assistant) and wireless database web server. The system is developed based on the Dot Net framework. The prototype can exchange the manufacturing execution data between production managers in the control room and workers in the factory through wireless internet communication. Manufacturing model of the panel shop is designed by using IDEF0 and UML method to understand the characteristics of the information and the data entities from the PPR-S view. Several issues in the shop were revealed from the manufacturing model analysis. The most typical problem was the lack of information sharing between the managing workers and the assembly workers. The problem prevents the workers and labors from sharing the process information and continuous workpiece flow In interactive way. To increase the information and data flow, a wireless internet based system is implemented and PDAs are linked together to exchange the process planning data and in-process data between the workers. It is anticipated that PDA and the implemented system can enable the process control at each process stages to obtain the well-organized operation.

• 한국공작기계학회논문집
• /
• 제16권3호
• /
• pp.44-49
• /
• 2007

Recent manufacturing system requires development on new production technology to enable prompt manufacturing of diverse products. Most of the researchers have been working on micro-factory. Especially, focus on manufacturing of micro parts. Present manufacturing system consumes excessive resources in the form of energy and space to manufacture the micro parts. In this study, the micro lens module assembly system was modeled, analyzed with MST(Micro System Technology) Application Module and simulated through UML Language (Unified Modeling Language) with object-oriented logical model analysis method. Digital model of micro-factory was modeled, to execute the new paradigm of digitalization on products, resources and processes of micro-factory.

• 로봇학회논문지
• /
• 제17권3호
• /
• pp.359-364
• /
• 2022

This study presents a nonlinear model predictive control (NMPC)-based obstacle avoidance and whole-body motion planning method for the mobile manipulators. For the whole-body motion control, the mobile manipulator with an omnidirectional mobile base was modeled as a nine degrees-of-freedom (DoFs) serial open chain with the PPR (base) plus 6R (arm) joints, and a swept sphere volume (SSV) was applied to define a convex hull for collision avoidance. The proposed receding horizon control scheme can generate a trajectory to track the end-effector pose while avoiding the self-collision and obstacle in the task space. The proposed method could be calculated using an interior-point (IP) method solver with 100[ms] sampling time and ten samples of horizon size, and the validation of the method was conducted in the environment of Pybullet simulation.