• Korean Journal of Applied Biomechanics
• /
• v.16 no.2
• /
• pp.97-108
• /
• 2006

C. H. OH, S. N. CHOI, T. G. NAM, The Kinematic Analysis of the Tennis Flat Serve Motion, Korean Jiurnal of Sports Biomechanics, Vol. 16, No. 2, pp. 97-108, 2006. By the comparison and the analysis of the different factors during the tennis flat serve motion such as the required time per section, the movement displacement of the racket, the velocity of the upper limbs joints, the physical center of gravity, and the angle and the angular velocity of the upper limbs joints between an ace player and a mediocre player, these following results were drawn. First, the experiment result of the total time required per section in a tennis flat serve motion showed that an ace player was faster than a mediocre player by 0.4 seconds. This result suggested that it was required to increase the speed of the racket head by a swift swing to perform an effective flat serve motion. Second, the experiment result of the movement displacement of the racket in the tennis flat serve motion showed that an ace player greatly moved toward the left side on an x-axis. But both an ace and a mediocre player were shown to be at the similar points on a y-axis at the moment of the impact of the racket. An ace player was also shown to be located at a higher position on a z-axis by 0.23m. Third, the velocity of the center of gravity of an ace player was faster in every phase than that of a mediocre player in a tennis flat serve motion. Fourth, the velocity of the upper limb joints of an ace player was faster in every phase than that of a mediocre player in a tennis flat serve motion. Fifth, the experiment result of the speed of the racket head in tennis flat serve motion showed that a mediocre player was faster than an ace player in the first phase, but the latter was faster than the former in the second, third, and the fourth phases. Sixth, at the moment of impact of a tennis flat serve, an ace player had greater flexion of the angle of the wrist joints by an 11.8 degree than a mediocre player. An ace player also had greater extension of the angle of the elbow joint and the shoulder joint respectively by a 5.2 degree and a 1.4 degree with a mediocre player. Seventh, an ace player had greater angular velocity of the upper limb joints and the hip joints than a mediocre player at the moment of the impact of tennis flat serve. Eighth, an ace player was shown to have a greater change of the forward and the backward inclination (or the anterior and posterior inclination) of the upper body

• Korean Journal of Applied Biomechanics
• /
• v.19 no.2
• /
• pp.265-272
• /
• 2009

K. H. KIM, J. H. CHO, and S. C. LEE, The Effect of Taping on Lower Extremity during Jump Landing in Subjects with Functional Ankle Instability. Korean Journal of Sport Biomechanics, Vol. 19, No. 2, pp. 265-272, 2009. Ankle taping is thought that it can be very useful in clinical setting for reducing injury. However, the studies of ankle taping is focused only ankle joint. The purpose of this study was to examine the effect of taping on lower extremity during jump landing in subjects with functional ankle instability. we collected the data from VICON. Joint range of motion for sagittal plane, frontal plane and transverse plane were measured during a jump-landing task. Taping used in this study appeared to restrict ankle motion with altering the knee and hip joint ROM. We found ankle taping had effects of reducing PF, initial contact PF in sagittal plane, while increasing knee flexion, hip flexion, intial contact hip flexion statistically. It decreased ankle inversion, knee valgus, initial contact knee valgus, hip abduction in frontal plane and ankle abduction, hip internal rotation in transverse plane statistically. Ankle taping showed significant change Knee and hip joint ROM with ankle joint ROM.

• Korean Journal of Microbiology
• /
• v.36 no.2
• /
• pp.91-96
• /
• 2000

The cultural and physiological conditions for the T-2 toxin [4,15-diacetoxy-8-(3-mety1butyloxy)-12,13- epoxy-trichothec-9-en-3-01, $C_{24}H_{30}O_9$] production by Fusarium spp. were studied. Thin layer chromatography (TLC) assay and the microbiological assay uslng Rhodotomla rubra were used to quantitate tbe T- 2 toxin. Among the four strains of Fusarium spp., F tn'cinctum NRRL 3299 was best for T-2 toxin production. In solid culture, white com grit medium was best for T-2 toxm production. Temperature played a critical role in the production of T-2 toxin. T-2 toxin production was favored by long duration of low-temperature incubation. The growth and toxin production were relatively high on galactose, fructose, glucose, and sucrose media, when each was used as a sole carbon source, and relatively low on sorbitol, glycerol, and lactose media. For nitrogen sources, $NH_4^(+) and NO_3^{-}were used well as a sole nitrogen source, but $NO_2^-$ was not used. Initial pH and speed of shaker also affected the production of T-2 toxin. From temperature shifting experiment, it is clear that T-2 toxin metabolic pathway is regulated by temperature-dependent enzyme depression or enzyme induction system.

• The Journal of Korean Obstetrics and Gynecology
• /
• v.31 no.1
• /
• pp.84-98
• /
• 2018

Objectives: The purpose of this pilot study was to examine the feasibility of recruiting women into a clinical trial designed to examine the effects of acupuncture and electroacupuncture in treating overactive bladder (OAB) in menopause women. We tried to determine if there was preliminary evidence to suggest that acupuncture may be effective in reducing OAB symptoms and improving disease-specific quality of life. We also tried to determine the appropriate treatment duration of OAB, with safety of performing acupuncture and electroacupuncture treatment. Methods: This study was a randomized clinical trial. 7 menopause women were randomly assigned to a electroacupuncture group (EA group) (n=4) or acupuncture group (AC group) (n=3) and received electroacupuncture or acupuncture treatment twice a week (16 sessions) in 8 weeks, and follow up assessment was performed after the end of treatment. Overactive Bladder Symptom Score (OABSS), 3-day bladder diary, and King's Health Questionnaire (KHQ) were performed 4 times (at baseline (visit 0), the middle of treatment (visit 8), after the end of treatment (visit 16), and at 4 weeks of follow-up (visit 17)) and analyzed. 2 subjects were dropped out, and finally 5 subjects completed the study. Statistical analysis was performed using SPSS 18.0 for window program. Results: There was an significant improvement in night-time frequency after the treatment (visit 17) in PP (Per-protocol) group analysis (p=0.042). In additional ITT (Inter-to-treat) group analysis, the OABSS (p=0.042) and night-time frequency (p=p=0.017) were improved significantly after the treatment (visit 17). But there was no significant difference of KHQ before and after the treatment. Also there was no significant difference between EA and AC group after the treatment (visit 16, 17). Conclusions: The results of this pilot study suggested that it was feasible to recruit subjects and perform the study procedures, after reconstructing several details of study protocol in performing further clinical trial.

• Journal of the Korea Institute of Information and Communication Engineering
• /
• v.19 no.11
• /
• pp.2689-2696
• /
• 2015

Radioactive isotopes which are manufactured using a cyclotron in a radioisotope used for radiation diagnosis is affected by the production yield according to size and shape of the beam and beam uniform degree from irradiated location when the proton beam investigated the target by cyclotron. Therefore, in this paper developed the BPM(Beam Profile Monitor) device capable of measuring the beam cross-section at the cyclotron beam line. It was configured so as to be able to remote control the BPM device in LabView and used the BPM program it was to be able to easily monitor and display to analyze the graph of two-dimensional graph and a three-dimensional beam distribution numerical information of the beam obtained while scanning the tungsten wire to the X and Y axis. The time it takes to measure the beam can be confirmed 37seconds when step motor driving speed was 2000pps. Through a beam readjusted based on the measured beam distribution information by optimizing the beam distribution it can be made to maximize the RI production yield and contribute supply stabilization.

• Korean Journal of Food Science and Technology
• /
• v.48 no.1
• /
• pp.36-41
• /
• 2016

In this study, the effects of intense pulsed light (IPL) treatment on microbial inactivation and quality in rapeseed sprouts were investigated. Untreated rapeseed sprouts exhibit a high level of total aerobic bacteria (TAB) ($1.2{\times}10^7CFU/g$), coliform bacteria (coliform) ($3.3{\times}10^6CFU/g$), and pathogenic E. coli (PE) ($2.1{\times}10^5CFU/g$). The microorganisms found on rapeseed sprouts decreased with exposure to increasing light intensity and treatment time. The greatest reduction in microbial content was observed with a treatment of 1000 V, 5 pps for 10 min, where TAB, coliform, and PE levels decreased to 1.0 log CFU/g, 1.6 log CFU/g, and 1.8 log CFU/g, respectively. In agreement with these data, the microbial inactivation rate increased with the increase in the distance between the light source and the samples during IPL treatment. After IPL treatment of rapeseed sprouts, water content and vitamin C content decreased.

• Korean Journal of Ecology and Environment
• /
• v.54 no.2
• /
• pp.130-141
• /
• 2021

By reviewing previous literature, we analyzed the food sources of 20 out of 29 endangered fish species from freshwater ecosystems in South Korea. A total of 19 studies reported that food sources of 20 endangered fish species included 20 phyla, 31 classes, 58 orders, 116 families, and 154 genera. Arthropod, insecta, diptera, and chironomidae were the most fed animal food sources according to different resolution of taxa index on phylum, class, order and family. Similarity, bacillariophyta, bacillariophyceae, naviculales, and cymbellaceae were the most fed abundant plant sources. A larger number of fish species were reliant on animal food sources than plant food sources. 18 of the endangered fish preyed on arthropods, whereas only 6 species consumed bacillariophyta. To characterize the feeding groups of the 20 fish species, a hierarchical clustering analysis and non-metric multidimensional scaling analysis were conducted. The fish species were divided into two groups: 1) insectivores and 2) planktivores. A network analysis, which associated the link between endangered fishes and food sources, also revealed the same two groups. The highest hub score of food sources was for macroinvertebrates, including diptera (0.47), ephemeroptera (0.42), and trichoptera (0.38), based on the network analysis. Niche breadth was used to calculate the diversity of the food sources. Phoxinus phoxinus (0.57) showed thehighest food source diversity among the fish species, whereas Iksookimia pacifica (0.01) showed the lowest. This study will be utilized for the conservation and restoration of the endangered fish species.

• Journal of Cadastre & Land InformatiX
• /
• v.51 no.1
• /
• pp.23-38
• /
• 2021

In this paper, we analyzed the possibility of utilizing LX-PPS GNSS permanent stations whose antennas are installed on the building rooftop for the purpose of high-precision GNSS positioning services. We picked 15 pairs of adjacent GNSS permanent stations operated by LX-PPS and NGII, and then produced 3-year-long time series using the high-precision data processing software called GIPSY. Patterns and trends of position estimates were compared and analyzed. Horizontal and vertical deviations including the linear velocities coincide with the well-known crustal deformation rates of the Korean peninsula. We also observed almost the same annual or seasonal patterns from those nearby sites. After detrending the linear velocity, the amplitude and phase of annual signals almost perfectly match each other within the baseline length of 2 km. By subtracting seasonal signals, the RMS and standard deviations in LX-PPS PPGR with respect to NGII KANR are about 1, 2, and 5 mm in the north-south, east-west, and vertical directions, respectively. From this analysis it can be concluded that the rooftop-installed LX-PPS sites show similar level of stability and positioning performance comparable to those ground-mounted NGII stations.

• KOREAN JOURNAL OF PACKAGING SCIENCE & TECHNOLOGY
• /
• v.28 no.3
• /
• pp.171-174
• /
• 2022

Cosmetic packing materials tend to be difficult to recycle when discarded due to the cosmetic industry's pursuit of aesthetics, functionality, and high value-added design. Pump packaging, which is widely used for the good preservation and discharge of cosmetics contents, is difficult to be separated and recycled because of a metal spring, which is in charge of pump resilience. In this study, a polypropylene spring was developed to replace the existing metal spring to improve the recyclability of the pump packaging for cosmetics, and was uni-materialized by applying to the cosmetic packing materials with 0.2 ml of discharge amount. In addition, performance test was conducted to verify the equivalence with the existing metal spring pumps as grounds for the commercialization of metal-free uni material pump packaging. The decompression leak test showed no leakage and displayed 14.8~17.5 N of pressing strength, 2.3~8.8 % of deviation in dispensing volume, and 4 occasions of pumping for initial discharge.

• Journal of Oral Medicine and Pain
• /
• v.34 no.1
• /
• pp.91-102
• /
• 2009

Condylar resorption, or condylysis can be defined as progressive alteration of condylar shape and decrease in mass. Condylar resorption is a poorly understood progressive disease that affects the TMJ and that can result in malocclusion, facial disfigurement, TMJ dysfunction, and pain. The aim of this study was to investigate clinical assessment and cephalometric characteristics in 224 patients with condylar resorption, who visited in the Department of Oral Medicine Kyungpook National University Hospital at 2006, by use of panorama, transcranial view and lateral cephalometric radiograph. The results were as follows; 1. Clinical assessment 1) Total number of patients who visited with chief complaints of TMD were 2419 and 224 (9.3%) among them revealed the condylar resorption, Among patients group with condylar resorption, female was 183 and male was 41, females were predominant. 2) Patient's age ranged from 12 to 70 and mean age was 30.6 years old with a strong predominance for 10s and 20s. Distribution of a showed as follows; 10s was 26.3%, 20s was 34,8%, 30s was 13.8%, 40s was 11.2%, 50s was 7.1%, 60s was 6.3% and 70s was 0.4%. 3) Most of the patients had parafunctional habit. 4) The case of showing the pain in condylar resorption was 145, the case of not showing the pain was 79. 5) Treatment duration of the patients was relatively short. 2. Cephalometric Characteristics 1) ANB which means the retruding of the mandible increased significantly than normal group. The ANB of female was lager than male group as the means of ANB were 5.05 in female and 3.57 in male, 2) SN-GoMe and FMA increased in resorption patients, but FH-PP did not show any significant difference. The FMA of female was lager than male group as the means were 31.69 in female and 30.44 in male. 3) Total posterior facial height was significantly smaller and total anterior facial height showed no significant increase as compared with those of the normal group. Condylar resorption was predominant in young female which was caused by more vertical facial pattern in female than male and increase of parafunctional habit in young age. It was thought that the patients who have a risk factor increasing the compressive stress at condyle caused by obliquely inclined masseter and medial pterygoid show high prevalence of condylar resorption.