• International Journal of Fluid Machinery and Systems
• /
• v.10 no.3
• /
• pp.188-196
• /
• 2017

The objective of this paper is to investigate the flow-induced vibration of a flexible hydrofoil in cavitating flows via combined experimental and numerical studies. The experiments are presented for the modified NACA66 hydrofoil made of POM Polyacetate in the closed-loop cavitation tunnel and the numerical investigations are performed using a hybrid coupled fluid structure interaction model. The results showed that with the decreasing of cavitation number, the vibration magnitude increases dramatically for the cloud cavitation and declines for the supercavitation. The cloud cavitation development strongly affects the vibration response, with the main frequency of the vibration being accordance with the cavity shedding frequency and other two frequencies corresponding to the bending and twisting frequencies.

• Journal of Ocean Engineering and Technology
• /
• v.20 no.4 s.71
• /
• pp.50-57
• /
• 2006

The effect of discharges from the Seomjin River on the dispersion of thermal effluent from the Hadong Power Plant, located along the south coast of Korea, was investigatedusing intensive field observation and three-dimensinal Princeton Ocean Model simulations. A POM and observed CTD data was used to predict the mixing behaviour of the Summer freshet, during the July 2005 intensive observing period. The dispersal of the river discharge anomaly, associated with the Seomjin River plume, was seen to be highly responsive to tidal currents and river flows during the spring tide.

• Korean Journal of Fisheries and Aquatic Sciences
• /
• v.53 no.4
• /
• pp.637-649
• /
• 2020

An ideal 3D primitive equation model is implemented to investigate upper ocean response to typhoons, focusing on rightward bias (RWB) which means an appearance of an intensified sea surface cooling to the right side of the typhoon track. The model has 26-stratified levels and a flat bottom (1000 m), covering a rectangular domain of about 3,060 km×3,300 km with four open boundaries. The sea water is forced by an atmospheric pressure and a gradient wind of the typhoon. The model well reproduces the RWB in previous observations and theoretical analyses. For the fast moving typhoon (FMT) (-8m/sec), the model shows that in the mixed layer (ML), the RWB in the SST noticeably appears clearly illustrating the coupling between inertial motion and wind stress, but in the subsurface layer (-100m), the RWB does not emerge since a cyclonic current field (CCF) caused by wind stress curl is primarily dominant. For the slowly moving typhoon (SMT) (-3m/sec), however, the RWB does not emerge because the coupling is weakened and the CCF is rather predominant even in the ML. In the model, we conclude that the RWB noticeably emerges in the FMT but does not emerge in the SMT related to predominance of CCF.

• Ocean and Polar Research
• /
• v.35 no.4
• /
• pp.427-439
• /
• 2013

Carbon cycling and productivity within Weno Island of Micronesia enclosed by the coral reef may be likely self-maintained and insignificantly affected by the open ocean. Therefore, it is important to understand the role of the mangrove known as providing the organic matter and habitats for many organisms in this enclosed area. In order to trace the nutritional source of fauna (mostly invertebrates) in the mangrove forest of Weno island, we analyzed the fatty acid (FA) and carbon and nitrogen stable isotopes of potential nutritional sources (mangrove leaf & pneumatophore, seagrass leaf & root, surface sediment, and particulate organic matter (POM) in water) and consumers (4 gastropods and anomura). The mangrove and seagrass contained the abundance of 18:2${\omega}$6, and 18:3${\omega}$3, whereas FAs associated with phytoplankton and bacteria were accounted for a high proportion in the surface sediment and POM. FA composition of consumers was found to be similar to those of the surface sediment, mangrove, and seagrass. These were also confirmed through the mixing model of stable isotope for contribution of nutritional sources to consumers. Overall results with the feeding types of investigated mangrove fauna indicate that investigated mangrove fauna obtained their nutrition from the various sources, i.e. the mangrove for Littorina cf. scabra, the microalgae for Strombus sp., and omnivorous Pagurus sp. and Terebralia cf. palustris. However, it is obvious that the nutrition of most species living in the mangrove ecosystem is highly dependent on the mangrove, either directly or indirectly. More detail food-web structure and function of the mangrove ecosystem would be established with the analysis of additional fauna and flora.

• Transactions of the Korean Society of Mechanical Engineers A
• /
• v.29 no.5 s.236
• /
• pp.689-697
• /
• 2005

This paper presents the reliability estimation of door hinge for home appliances, which consists of bushing and shaft. The predominant failure mechanism of bushing made of polyoxymethylene(POM) is brittle fracture due to decrease of strength caused by voids existing, and that of shaft made of acrylonitrile-butadiene-styrene(ABS) is creep due to plastic deformation caused by excessive temperature and lowering of glass transition temperature by absorbed moisture. Since the brittle fracture of bushing is overstress failure mechanism, the load-strength interference model is used to estimate the failure rate of it along with failure analysis. By the way, the creep of shaft is wearout failure mechanism, and an accelerated life test is then planned and implemented to estimate its lifetime. Through the technical review about failure mechanism, temperature and humidity are selected as accelerating variables. Assuming Weibull lifetime distribution and Eyring model, the life-stress relationship and acceleration factor, $B_{10}$ life and its lower bound with $90\%$ confidence at worst case use condition are estimated by analyzing the accelerated life test data.

• Proceedings of the Korean Reliability Society Conference
• /
• 2004.07a
• /
• pp.303-311
• /
• 2004

This paper presents the reliability estimation of door hinge for home appliances, which consists of bushing and shaft. The predominant failure mechanism of bushing made of polyoxymethylene(POM) is brittle fracture due to decrease of strength caused by voids existing, and that of shaft made of acrylonitrile-butadiene-styrene(ABS) is creep due to plastic deformation caused by excessive temperature and lowering of glass transition temperature by absorbed moisture. Since the brittle fracture of bushing is overstress failure mechanism, the load-strength interference model is used to estimate the failure rate of it along with failure analysis. By the way, the creep of shaft is wearout failure mechanism, and an accelerated life test is then planned and implemented to estimate its lifetime. Through the technical review about failure mechanism, temperature and humidity are selected as accelerating variables. Assuming Weibull lifetime distribution and Eyring model, the life-stress relationship and acceleration factor, B$_{10}$ life and its lower bound with 90% confidence at worst case use condition are estimated by analyzing the accelerated life test data.a.

• Journal of the Korean Society of Marine Environment & Safety
• /
• v.20 no.4
• /
• pp.335-344
• /
• 2014

To understand the drift-diffusion of HAB(Harmful Algal Bloom) in this paper, we used three-dimensional hydrodynamic model POM(Pringceton Ocean Model) and Lagrangian particle track module. First, the results of residual flow that considered tide, wind, temperature, salinity, and TWC(Tsushima Warm Current) effect was tend to northeast in the coastal area and the flow in the offshore region showed results similar to TWC. To understand of HAB's movement, released each area that southern Kamak bay(Case 1), Mijo coast(Case 2), and southern Mireukdo coast(Case 3) assumption that red tide occurred. The areas where the HAB occurs frequently. As a result of HAB occurred in southern Kamak Bay(Case 1), mainly drifts to Narodo coast and Yeoja bay that located on the west side. Case 2 was mainly drifts to Yokjido coast and Saryangdo coast Especially, HAB occurred in Mireukdo coast(Case 3) relatively many particles drift to eastward as the influence of the TWC.

• Proceedings of the Korean Society for Noise and Vibration Engineering Conference
• /
• 2007.05a
• /
• pp.379-382
• /
• 2007

The proper orthogonal decomposition(POD) is used to the modal analysis of microcantilever of dynamic mode atomic force microscopy(AFM). The proper orthogonal modes(POM) are extracted from vibrating signals of microcantilever when it resonates and taps the sample. The POMs resemble the linear normal modes(LNM) of cantilever vibrating at each resonance frequency. Some of POMs in tapping microcantilever show quite different shapes from the POMs of the resonating microcantilever. Also this POMs can be applied to model for the complex nonlinear behavior of the dynamic mode AFM microcantilevers.

• Proceedings of the KIEE Conference
• /
• 1992.07a
• /
• pp.354-358
• /
• 1992

본 연구에서는 n-차 비선형 로보트 매니퓰레이터에서 링크의 동특성에 액류웨이터의 동특성을 포함시킨 복합모델(Combined Model)의 알고리즘을 제안하였다. 여기서 이 복합 모델의 알고리즘은 고속운전 및 빈번한 부하의 변동시에 중요한 역할을 하는 액류웨이터 모터의 동특성 방정식과 매니퓰레이터 링크의 운동을 묘사하는 동특성 방정식을 포함시킨 알고리즘을 의미한다. 또한 제안된 모델은 선영궤환 및 감결합 변환(Feedback Linearizing and Decoupling Transformation : FLDT)법을 이용하여 선형시스템으로 변환시켰다. 따라서 본 연구에서는 고속운전 및 빈번한 부하의 변동에도 액류웨이터 모터의 전압과 전류를 조절함으로써 효과적으로 제어할 수 있게 하는 매니퓰레이터 모델 알고리즘을 개발하는데 그 목적이 있다.

• Journal of the Korean Society of Manufacturing Process Engineers
• /
• v.11 no.3
• /
• pp.154-159
• /
• 2012

For numerical analysis of the plate heat exchanger, a lot of time are required in modeling work and calculation. Whereas, this paper was purposed to identify characteristic of the plate heat exchanger through simplification of modeling by interpreting the numerical analysis proximity with the actual model. This study was also examined temperature difference between inlet side and outlet side, inner pressure drop, heat transfer area of plate and change of heat transfer coefficient on the plate depending on the inner corrugation angle and corrugation pitch of a herring bon pattern of the plate heat exchanger among chevron types of the plate exchanger.