• Korean Chemical Engineering Research
• /
• 제50권4호
• /
• pp.639-645
• /
• 2012

Isophorone diisocyanate, polycarbonate diol, dimethylol propionic acid를 출발물질로 하여 제조된 폴리우레탄 prepolymer의 미반응 NCO 기를 실란커플링제인 aminopropyl trietoxysilane (APS)로 capping시켜 수분산 폴리우레탄(waterborne polyurethane dispersion, PUD)을 합성하였다. 그 후 이 PUD에 아크릴 단량체인 2-hydroxyethyl methacrylate와 methyl methacrylate의 혼합물을 첨가하고 중합시켜 silylated acrylic polyurethane dispersion을 제조하였다. 동적 빛 산란법에 의해 측정된 silylated acrylic polyurethane dispersion의 평균 직경은 APS 첨가량이 증가됨에 따라 39.0 nm에서 399.8 nm로 크게 증가하였다. 또한 코팅 도막의 연필경도는 APS의 첨가량이 증가되면서 B에서 F로 향상되었다.

• 한국염색가공학회지
• /
• 제27권2호
• /
• pp.126-131
• /
• 2015

Silica-polyurethane hybrid breathable films were prepared and their breathabilities were assessed. Appropriately aggregated silica was prepared through sol-gel reaction of water glass and its particle size ranged 360~500nm. The polyurethane dispersion was prepared by the reaction of isophorone diisocyanate(IPDI) as diisocyanate and polytetramethylene glycol(PTMG) and dimethylol propionic acid(DMPA) as polyol, particle size ranging 30~120nm. The reaction between isocyanate and hydroxyl group to form urethane bonding was checked by the intensity of the stretch peak of isocyanate at $2270cm^{-1}$ in the FT-IR. The silica was incorporated into polyurethane dispersion and casted into film. It was shown that the incorporated silica(1~5wt.%) increased water vapour permeability of the films by 30~100%, and decreased the hydrostatic pressure by 10~40%. From the results, it could be concluded that the appropriate hybridization of silica can increase the breathability of polyurethane dispersion film, while minimizing the loss of hydrostatic pressure.

• Corrosion Science and Technology
• /
• 제14권5호
• /
• pp.207-212
• /
• 2015

The purpose of this research was to synthesize fluorine modified waterborne polyurethane dispersion (F-WPU) by soap-free (internal emulsifier) emulsion polymerization techniques, to prepare coating solution based on fluorine modified waterborne polyurethane dispersion (F-WPU) and to compare the chemical and thermo-mechanical properties on the electrogalvanized steel sheet. Environmentally friendly F-WPU was prepared with a fluorinated polyol containing 60 wt% of fluorine. There are various ways of combining a wide variety of fluorinated polyols and diisocyanate to exhibit novel properties of waterborne polyurethane dispersion. Components of coating solution were largely divided into 4 kinds i.e., F-WPU, acrylic emulsion, silane coupling agent, and colloidal silicate. F-WPU coating solution on the electro-galvanized steel sheet showed excellent properties of corrosion resistance, alkali resistance and heat resistance, as compared to other coating solutions using a general waterborne resin. The F-WPU coating solution's reliable effects are possibly due to the fluorine atoms incorporated even in a small amount of F-WPU.

• Korean Chemical Engineering Research
• /
• 제50권3호
• /
• pp.403-409
• /
• 2012

Poly (carbonate diol), isophrone diisocyanate와 dimethylol propionic acid로 부터 제조된 polyurethane prepolymer의 말단 NCO기를 aniline으로 capping시켜 aniline terminated waterborne polyurethane dispersion (ATWPUD)을 합성하였다. 이 ATWPUD와 물에 분산되어 있는 multi-walled carbon nanotube (MWCNT)를 혼합시켜 전도성 코팅 용액을 제조한 후, 이것을 polycarbonate 기재 위에 도포하여 코팅 막을 형성하였다. ATWPUD와 MWCNT를 혼합하여 얻어진 코팅 막의 표면저항 값은 $10^{7.6}{\sim}10^{7.7}{\Omega}/cm^2$로 순수한 waterborne polyurethane dispersion (WPUD)과 MWCNT의 혼합물로부터 제조된 코팅 막의 $10^{10.9}{\Omega}/cm^2$ 보다 우수한 전기전도도를 나타내었다. 또한 ATWPUD에 첨가되는 MWCNT의 양이 증가될수록 코팅 막의 전기전도도는 증가하였지만 연필경도 및 부착력은 감소되었다.

• 한국염색가공학회지
• /
• 제22권4호
• /
• pp.362-372
• /
• 2010

This paper surveys the physical properties of the multiwall carbon nanotube (MWNT) and polyurethane composite film for improvement of mechanical properties and electrical characteristics. The modification of MWNT was carried out by acid treatment with nitric and sulphuric acid mixed solution, and then followed by thermal treatment for enhancing MWNT dispersion with polyurethane. This modified MWNT was mixed with polyurethane by changing the loading content of MWNT and dispersion time under the dimethylformamide solution in the ultrasonic wave apparatus. Various physical characteristics of the modified PU/MWNT films were measured and analyzed in terms of the loading content and dispersion time. The maximum absorbance of the PU/MWNT films were observed with the 2wt% loading at dispersion times of 2 and 24 hour, respectively. The minimum electrical volume resistivity of PU/MWNT film was shown at the loading content of 0.5wt% or more irrespective of dispersion treating time. However the optimum condition was assumed to 2wt% loading at dispersion time of 2 hours by assessing the surface profile of the film using video microscope. The breaking stress and strain of the PU/MWNT film decreased with increasing loading content, but no change of physical properties was shown with increasing in dispersion time.

• Korean Chemical Engineering Research
• /
• 제50권4호
• /
• pp.614-620
• /
• 2012

Poly (carbonate diol), isophrone diisocyanate와 dimethylol propionic acid로부터 제조된 폴리우레탄 prepolymer의 말단 NCO 기를 aniline으로 capping시켜 aniline terminated waterborne polyurethane dispersion (ATPUD)을 합성하였다. 이 ATPUD와 순수한 waterborne polyurethane dispersion (PUD)을 각각 전도성 고분자인 polystyrene sulfonate로 도핑된 poly (3,4-ethylenedioxythiophene)[PEDOT/PSS]과 블렌딩시켜 대전방지용 코팅 용액을 제조한 후, 이것을 polycarbonate 기재 위에 도포하여 코팅 도막을 형성하였다. PEDOT/PSS가 2.5 g 이하로 적당량 첨가된 경우에는 ATPUD로 제조된 코팅 도막의 표면저항 값은 $1.0{\times}10^{11}{\sim}2.5{\times}10^8{\Omega/cm^2$로 순수한 PUD로부터 제조된 코팅 도막의 $5.0{\times}10^{11}{\sim}6.3{\times}10^9{\Omega}/cm^2$ 보다 우수한 전기전도도를 나타내었다. 그러나 PEDOT/PSS가 3.0 g으로 과량 첨가된 경우에는 ATPUD로부터 제조된 코팅 도막과 PUD로부터 제조된 코팅 도막은 비슷한 전기전도도를 나타내었다.

• 한국염색가공학회지
• /
• 제22권1호
• /
• pp.43-50
• /
• 2010

The thermal treatment for carbon nanotube was applied to remove the water, metal catalyst and other impurities in carbon nanotube. The surface of carbon nanotube was changed into open structure with acid treatment by mixed solution of $HNO_3$ and $H_2SO_4$. The dispersion property of the functionalized and modified carbon nanotube was assessed with naked eyes by dispersing it in DMF. Carbon nanotube mixd polyurethane film was made to estimate the dispersion property by reflectance of the film with UV-Vis spectrometer. Also the internal structure of carbon nanotube was observed with SEM and TEM and thermal pyrolysis property of the carbon nanotube was measured by TGA and DSC. The surface modification of carbon nanotube by thermal and acid treatments improved the dispersion property of carbon nanotube/polyurethane mixed materials.

• Korean Chemical Engineering Research
• /
• 제52권4호
• /
• pp.451-458
• /
• 2014

Isophrone diisocyanate (IPDI), polycarbonate diol (PCD)과 dimethylol propionic acid (DMPA)를 출발물질로 하여 수분산 폴리우레탄(waterborne polyurethane dispersion, WPUD)을 합성하였다. 이 WPUD에 아크릴 단량체인 methyl methacrylate (MMA), 2-hydroxyethyl methacrylate (HEMA)와 butyl acrylate (BA)를 각각 첨가하여 다양한 종류의 수분산 아크릴 폴리우레탄(waterborne acrylic polyurethane dispersion, AUD)을 합성하였다. 이 AUD와 물에 분산된 다중벽 탄소나노튜브(multi-walled carbon nanotube, MWCNT)를 혼합하여 전도성 코팅 용액을 제조한 후 polycarbonate 시트 위에 도포하여 코팅 도막을 형성하고 물성을 살펴보았다. AUD로부터 제조된 코팅 도막의 연필경도, 내마모성 및 내약품성은 WPUD 보다 향상되었으나, 전기 전도도는 감소하였다. 또한 아크릴 단량체의 종류 변화 실험에서는 코팅 도막의 연필경도는 HEMA를 사용한 경우가 가장 우수하였으나, 내마모성, 내약품성 및 전기 전도도는 MMA를 사용한 경우가 가장 우수하였다.

• Korean Chemical Engineering Research
• /
• 제51권1호
• /
• pp.73-79
• /
• 2013

Polycarbonate diol (PCD), isophorone diisocyanate (IPDI)와 dimethylol propionic acid (DMPA)를 출발물질로 하여 수분산 폴리우레탄(waterborne polyurethane dispersion, WPUD)을 합성하였다. WPUD에 아크릴 단량체인 methyl methacrylate (MMA)를 첨가하여 수분산 아크릴 폴리우레탄(waterborne acrylic polyurethane dispersion, AUD)을 합성하였다. 이 AUD와 물에 분산되어 있는 multi-walled carbon nanotube (MWCNT)를 혼합하여 전도성 코팅 용액을 제조한 후 polycarbonate 시트 위에 도포하여 코팅 도막을 형성하였다. AUD 중의 MMA의 첨가량이 증가될수록 코팅 도막의 연필경도, 내마모성 및 내약품성은 향상되었으나 전기 전도도는 감소하였다. 반면에 전도성 코팅 용액 중의 MWCNT의 첨가량이 증가될수록 코팅 도막의 연필경도, 내마모성 및 내약품성은 감소되었으나 전기 전도도는 증가하였다.

• 한국응용과학기술학회지
• /
• 제18권3호
• /
• pp.241-247
• /
• 2001

Aqueous urethane dispersion resin begins to assume commercial importance due to increasing environmental awareness of VOC in coating industry. Moreover there have been strong industrial needs for the development of reactive-type polyurethane flame retardant coatings. In this study, chlorinated polyester polyols were synthesized by two step polycondensation reaction using mono chloroacetic acid, adipic acid, trimethylol propane, and 1,4-butanediol. In the next step polyurethane dispersion was prepared using these chlorinated polyester polyols and isophorone diisocyanate with dimethylol propionic acid(DMPA) and trimethylamine. The structure of chlorinated polyol was characterized by GPC, FT-IR and NMR. Particle size and its distribution were examined in terms of various dispersion parameters including molecular weight and composition of polyol, amount of DMPA, and NCO/OH ratio, etc. The effect of chlorinated polyols on flammability was also evaluated.