• Journal of the Korean Ceramic Society
• /
• v.45 no.11
• /
• pp.744-749
• /
• 2008

The properties of the polymer-modified mortars are influenced by the polymer film, cement hydrates and the combined structure between the organic and inorganic phases. Also, this quality of polymer modified cement strongly depend on weather condition and polymer cement ratio. To overcome this problem, polymer-modified cement were prepared by varying polymer/cement mass ratio (P/C) with $0{\sim}20%$ and constant water/cement mass ratio of 0.5. The effect of polymer on the hydration of this polymer cement is studied on different polymer cement ratio. The results showed that the polymer cement paste have increased the viscosity in addition the amount of polymer dosage and the polymers is completed resulting in a reduced degree of hydration caused by different ion elution amount. Also we know that the reactants is calcium acetate as a results of chemical reaction between acetate group in EVA which is hydrolysis in water and $Ca^{2+}$ ion during hydration of cement.

• Macromolecular Research
• /
• v.13 no.5
• /
• pp.403-408
• /
• 2005

A new terphenylenevinylene carbazylenevinylene alternating copolymer with the advantage of poly(p-phenylenevinylene) (PPV), poly(p-phenylene )(PPP) and poly(carbazole) was designed, synthesized and characterized. The polymer structure was confirmed by various spectroscopic analyses and the number average molecular weight ($M_n$) of the obtained polymer was 7,800. The resulting polymer was thermally stable with high glass transition temperature ($T_g$) ($150^{\circ}C$), and was readily soluble in common organic solvents. Cyclic voltammetry study revealed that the HOMO and LUMO energy levels of the polymer were 5.37 and 2.47 eV, respectively. The ITO/PEDOT/polymer/AI device fabricated from the polymer emitted bright sky blue light with a maximum peak of around 478 nm. The device showed the maximum brightness of 1,200 nW with a turn-on voltage of 7V.

• Journal of the Korea Institute of Building Construction
• /
• v.9 no.5
• /
• pp.71-77
• /
• 2009

In a range of forms, such as latex, water-soluble polymer, liquid resin, and monomer, polymer dispersions have been widely used in the construction industry as cement modifiers because of their excellent properties, such as acid-resistance, water-proofness, and good ductility in mortar and concrete. Polymer cement slurry (polymer-modified slurry) is made of cement and polymer dispersions, with a high polymer-cement ratio of 50% or more. The purpose of this study is to evaluate the water permeability and drying shrinkage of polymer cement mortar (polymer-modified mortar) and cement concrete coated by polymer cement slurry. The polymer cement mortar and cement concrete are prepared with various polymer types, polymer-cement ratios and curing methods, and are tested for water permeability, drying shrinkage and strength. The test results showed thatthe weight of permeable water of polymer cement mortar decreases with an increase in the polymer-cement ratio, reaching a minimum at the polymer-cement ratio of 20%. In particular, the weight of permeable water of St/BA-modified mortar with a polymer-cement ratio of 20% coated with St/BA-modified slurry is about 1/55 that of unmodified mortar. The EVA- and St/BA-modified slurries coated on cement concrete have about 4 or 5 times higher drying shrinkage compared to cement concrete. The strength of polymer cement mortars tends to increase with a higher polymer-cement ratio, and is considerably higher than that of unmodified mortar. It is thus concluded that polymer cement mortars coated by polymer cement slurry are effective for industrial application, and have superior properties such as waterproofness and strengths, compared with conventional cement mortar.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2004.05a
• /
• pp.296-299
• /
• 2004

The effects of polymer-cement ratio, antifoamer content and shrinkage-reducing agent content on the setting time and drying shrinkage of high-fluidity polymer-modified mortars using redispersible polymer powder are examined. As a result, the setting time of the high-fluidity polymer-modified mortars using redispersible polymer powder tend to delayed with increasing polymer-cement ratio, regardless of the antifoamer conten,. Irrespective of the antifoamer content, the drying shrinkage of the high-fluidity polymer-modified mortars using redispersible polymer powder tend to decrease with increasing polymer-cement ratio and shrinkage-reducing agent content.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.280-280
• /
• 2006

Na-bentonite (local clay mineral) and Na-montmorillonite were treated with quaternary alkylammonium cations. The effect of the molecular structure and functional groups of the surfactants on the organoclays was investigated by X-ray diffraction (XRD). For the preparation of nanocomposites, organoclays were melt-blended with polypropylene in a twin screw extruder and $Surlyn^{(R)$. ionomer was used as a reactive compatibilizer. The clay dispersions in the composites were investigated by X-ray diffraction (XRD). XRD spectra showed no peak at low angle indicated that the silicate clay layer has a nearly exfoliated dispersion in the polymer matrix. Thermal and mechanical properties of nanocomposites were higher than those of PP.

• Macromolecular Research
• /
• v.9 no.5
• /
• pp.292-295
• /
• 2001

A cross-linked solid polymer electrolyte was prepared by copolymerizing photochemically acrylonitrile (AN), oligo(ethylene glycol ethyl ether) methacrylate, oligo(ethylene glycol) dimethacrylate in the presence of lithium perchlorate as a lithium salt, ethylene carbonate-propylene carbonate as a mixed plasticizer, and poly(ethylene oxide) as a polymer matrix. The maximum ionic conductivity of the polymer electrolyte was 2.35$\times$10$\^$-3/ S/cm. The interface resistance of the polymer electrolyte was very low compared to that of the polymer electrolyte without AN. The former electrolyte was stable up to 4.3 V and the Ah efficiency was nearly 100% during the charge-discharge cycle.

• ETRI Journal
• /
• v.18 no.3
• /
• pp.181-193
• /
• 1996

A blue light emitting device has been successfully fabricated using a polymer with regulated conjugation length containing trimethylsilyl substituted phenylenevinylene units. Electroluminescence from the device has an emission maximum at 470 nm. The device shows typical diode characteristics with operating voltage of 20 V and the light becomes visible at a current density of less than $0.5;mA/cm^2$. The electroluminescence spectrum is virtually identical with the photoluminescence spectrum, indicating that the radiation mechanisms are the same for both. A light emitting device using the blend of a large band gap polymer and a small band gap polymer was also fabricated. Light emission from the small band gap polymer shows much improved quantum efficiency, but there is no light emission from the large band gap polymer. Quantum efficiency of the blend increases up to about two orders of magnitude greater than that of the small band gap polymer with increasing proportion of the large band gap polymer. The improvement in quantum efficiency is interpreted in terms of exciton transfer and the hole blocking behaviour of the large band gap polymer. Finally, we have fabricated a patterned flexible light emitting device using the high quantum efficiency polymer blend system.

• Journal of the Korean Ceramic Society
• /
• v.44 no.9
• /
• pp.496-501
• /
• 2007

The properties of the polymer-modified mortars are influenced by the polymer film, cement hydrates and the combined structure between the organic and inorganic phases. Also, this quality of polymer modified cement strongly depend on weather condition. To overcome this problem, polymer-modified cement based on rapid setting cement mortars were prepared by varying polymer/cement mass ratio (P/C) with a constant water/cement mass ratio of 0.5. The effect of polymer on the hydration of this polymer cement is studied on different curing temperature. The results showed that the polymer mortar which is modified with rapid setting cement have superior physical strength properties on independent curing temperature. In addition the PIC ratio, the compressive strength, flexural strength, tensile strength and adhesion strength of mortar is enhances and polymer-modified cement based on rapid setting cement is more beneficial to the improvement of the mortar properties in jobsite.

• Proceedings of the Korea Concrete Institute Conference
• /
• 2001.11a
• /
• pp.147-152
• /
• 2001

The purpose of this study is to ascertain the strength properties of water-permeable polymer concretes with SBR latex and redispersible polymer powder. The water-permeable polymer concretes using SBR latex and redispersible polymer powder with water-binder ratio of 29%, polymer-cement ratios of 0, 5, 10, 15 and 20% are prepared, and tested for compressive strength, tensile strength, flexural strength, water permeability. From the test results, improvements in the strength properties of the water-permeable polymer concretes due to the addition of the SBR latex and redispersible polymer powder are discussed.

• Proceedings of the Polymer Society of Korea Conference
• /
• 2006.10a
• /
• pp.108-108
• /
• 2006

The role of conformational entropy of polymer chains in polymer crystallization is investigated by molecular modeling and theory. The entropy of folded loops dominates at experimentally relevant temperatures to dictate short equilibrium lamellar thicknesses, which are much smaller than the extended chain thickness. Also the entropic barriers control the kinetics of polymer crystallization. These results based on chain entropy are different from the classical views of how polymer chains crystallize.