• 한국인쇄학회지
• /
• 제12권1호
• /
• pp.1.1-11
• /
• 1994

The photosensitive properties and carrier transport in the organic photoconductor with the carrier transport layers(CTL) of polymer matrix doped with two carrier transport materials above carrier generation layer(CGL) containing oxotitanium phthalocyanine (TiOPc) were investigated. The CGL of TiOPc dispersed in poly(vinylbutyral) was formed as thickness of 0.1${\mu}{\textrm}{m}$and the carrier transport layer was prepared by coating polycarbonate and polyester doped with oxadiazoly(OXD), polyvinylcarbazole (PVK), trinitro fluorenone(TNF) as thickness of 10~15${\mu}{\textrm}{m}$, respectively. We have measured half decay exposure,sensitivity and xerographic gain from the photo-induced discharge curve(PIDC). In this work, it was found that the characteristics of carrier transport were mainly caused by the ionization potential difference of constitutive materials in molecularly doped polymer.

• 한국응용과학기술학회지
• /
• 제17권2호
• /
• pp.76-82
• /
• 2000

The relative reactivities of branched and linear polycarbonates were investigated by measuring unreacted chloroformate concentration. It was found that the polymerization for the branched polymer proceeded ca. 10 times faster than that for the linear polymers. The effect of catalyst on a condensation step was studied by changing the amount of TEA (triethylamine) at $t_{0}$ and $t_{60}$ with keeping constant amount of TEA. The viscosity average molecular weight for the obtained branched polycarbonates were measured and compared with those of linear polycarbonates. It was found that the viscosity molecular weights of the obtained polymers decreased nonlinearly as wt % of added oligomer increased. The solution viscosities in methylenechloride for linear and branched polycarbonate increased nonlinearly as the content of polymer increased.

• 한국인쇄학회지
• /
• 제16권3호
• /
• pp.43-60
• /
• 1998

The photosensitive properties and spectroscopic characteristics in the organic photoconductor(OPC) with carrier generation layer(CGL) of poly(vinylbutyral)(PVB) and polycarbonate(PC) doped with titanyl phthalocyanine(TiOPc) were investigated. The change of crystal structure of TiOPc dispersed with PVB and PC was shown by UV-visible reflective spectrum and FT-IR spectrum and mainly caused by the difference of solubility of solvent and the interaction between TiOPc and binder. The particle size of TiOPc dispersed with PVB measured by SEM was smaller than in PC. The crystal structure of TiOPc dispersed with PVB was amorphous type and in PC was $\alpha$type. It was found that the photosensitive properties of OPC were dependent on the change of absorbance and ionization potential of TiOPc occurred from the difference of crystal structure. In this work, the photosensitivity of OPC of TiOPc dispersed with PVB was better than PC due to the crystal type and the smaller particle size.

• Transactions on Electrical and Electronic Materials
• /
• 제6권4호
• /
• pp.149-153
• /
• 2005

In this paper, we investigated the island density-dependent stress distribution of indium-tin-oxide (ITO) film on polycarbonate substrate by external bending force. We used e-beam and RF­sputter for SiON, ITO sputtering. It was found that there are influence of island density on the substrate and decreasing crack density as goes to the minimum density. From the result that crack density was increasing at maximum island density, it is evident that more stress is imposed on same island position as island density.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.269-270
• /
• 2006

이온빔 스퍼터를 사용하여 PC기판위에 $TiO_2$ 박막을 증착한 후 광학적 특성을 고찰하였다. 증착 전 어시스트 이온건을 사용하여 아르곤 플라즈마로 표면처리를 하였으며, Ti 박막을 $300{\AA}$정도로 증착한 다음, 그 위에 산소 반응스퍼터링 기법을 사용함으로써 $TiO_2$박막을 증착하였다. 표면처리에 의한 기판의 표면개질로 TI 버퍼층과의 막부착력을 높이고, 아르곤 산소의 분압비를 1로 고정하였을 때, $TiO_2$박막의 두께에 따라서 박막의 색상이 변화는 것을 관찰할 수 있었다. 또한, 아르곤과 산소의 분압 변화에 대한 의존성은 $TiO_2$박막의 색상과 투과율과 같은 광학적인 성질에 영향을 미치는 것을 알 수 있었다.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.199-200
• /
• 2006

Transparent conductive alum mum-doped ZnO (AZO) films have been prepared on polycarbonate (PC), Coring 7059 and Quartz substrates by DC sputtering method at room temperature. Films deposited was evaluated about spectra of X-ray diffraction and transmittance and characteristics of films deposited as kind of substrate was compared. Films deposited showed (002) orientation and all AZO films are transparent over 80% within the visible wavelength region.

• 한국전기전자재료학회:학술대회논문집
• /
• 한국전기전자재료학회 2006년도 추계학술대회 논문집 Vol.19
• /
• pp.284-285
• /
• 2006

We prepared ITO thin films using Facing Targets Sputtering(FTS) method with various input currents at room temperature on Polycarbonate(PC) and Polyethersulfon(PES) substrates. As a function of sputtering conditions, electrical and optical properties of prepared ITO thin films were measured. The electrical, optical, structural characteristics of ITO thin films were evaluated by Hall Effect Measurement(EGK), X-Ray Diffractormeter(Rigaku) and UV-VIS spectrometer(HP) respectively. From the results, we obtained ITO thin films that have a resistivity of $4{\times}10^{-4}[{\Omega}-cm]$ on PC and $527{\times}10^{-4}[{\Omega}-cm]$ on PES. Also, the optical transmittances of all samples were over 80%.

• 대한약학회:학술대회논문집
• /
• 대한약학회 2003년도 Proceedings of the Convention of the Pharmaceutical Society of Korea Vol.1
• /
• pp.185.3-186
• /
• 2003

It is well-known that bisphenol A(BPA), an industrial raw material for polycarbonate and epoxy resins, shows estrogenic activity. Recent research from our laboratory has shown that SPA disrupts interaction between thyroid hormone and its receptor in a non-competitive manner, and alters the thyroid-hormone dependent expression of growth hormone(GH) and prolactin(PRL). (omitted)

• 한국태양에너지학회 논문집
• /
• 제21권2호
• /
• pp.9-17
• /
• 2001

In this paper the attempts made by the authors to explore the feasibility of utilising concentrated solar beam radiation for joining engineering thermoplastics such as Acrylonitrilc/Butadiene/Styrene (ABS), Polycarbonate(PC) and Polymethylmethacrylate(PMMA) are presented. In addition, to study the joining of the materials, necessary experimentation with applying primer was performed. Tensile tests were conducted to determine the bond strength achieved at the specimen joint interface. Microscopic examinations of the fractured joints were performed in order to analyse the overall bond quality. Finally, the results in terms of bond strength achieved at the joint interface and energy consumed in the process were compared with those obtained with similar thermoplastic joining technique utilising microwave energy. In conclusion some advantages and limitations were outlined and necessary improvements of the jointing technique were recommended.

• 한국반도체및디스플레이장비학회:학술대회논문집
• /
• 한국반도체및디스플레이장비학회 2006년도 추계학술대회 발표 논문집
• /
• pp.56-59
• /
• 2006

The ITO thin films were prepared by FTS (Facing Targets Sputtering) system on polycarbonate (PC) substrate. The ITO thin films were deposited with a film thickness of 100nm at room temperature. As a function of sputtering conditions, electrical and optical properties of prepared ITO thin films were measured. The electrical and optical characteristics of the ITO thin films were evaluated by Hall Effect Measurement (EGK) and UV-VIS spectrometer (HP), respectively. From the results, the ITO thin film was deposited with a resistivity $8{\times}10^{-4}[{\Omega}-cm]$ and transmittance over 80%.