• Elastomers and Composites
• /
• 제46권1호
• /
• pp.60-69
• /
• 2011

[ $2.1\;{\mu}m$ ]입자경의 단분산 PBA seed를 이용한 2단계 분산중합을 seeded batch process 와 seeded semi-continuous process를 이용하여 다양한 형태의 PBA/PMMA composite 미립자를 제조하였다. Batch process의 경우 PBA/PMMA composite 입자의 모폴로지는 중합 분산매인 methanol/water 비와 중합 2단계에서의 PBA seed/MMA단량체의 비에 따라 크게 영향을 받으며, methanol/water 중합분산매중 물의 량이 증가함에 따라, 그리고 중합 2단계에서 MMA단량체량이 증가함에 따라 PBA와 PMMA간의 상분리현상이 심화되어 구형의 입자로부터 egg, snowman, confetti, peanut와 같은 비구형의 PBA/PMMA composite 입자들이 제조되었다. Semi-continuous process의 경우 단량체 부가시간을 조절함으로서 PBA/PMMA composite 입자의 모폴로지가 변함을 발견하였고 특히, 단량체의 결핍된 조건하에서 구형의 PBA(코어)/PMMA(쉘) composite 라텍스가 제조되었다.

• 한국응용과학기술학회지
• /
• 제21권4호
• /
• pp.370-379
• /
• 2004

Highly crosslinked micron-size monodispersed PMMA/PDVB and PS/PDVB particles were prepared using seeded multi-stage emulsion polymerization. PMMA and PS seed particles were synthesized by seeded multi-stage emulsion polymerization and soap-free emulsion polymerization. Then PMMA/PDVB and PS/PDVB particles were obtained using semi-batch type emulsion polymerized using divinyl benzene as a cross-linkable monomer in the presence of seed particles. PMMA particles with size of ca. 730 nm and polydispersity of 1.03 were successfully prepared in this experiment. PS particles with size of ca. 1.5 ${\mu}m$ and polydispersity of 1.01 were prepared in this experiment. Highly crosslinked PS/PDVB particles with size of ca. 1.3 ${\mu}m$ and polydispersity of 1.00 were obtained.

• Macromolecular Research
• /
• 제17권4호
• /
• pp.250-258
• /
• 2009

One-step seeded polymerization was used to prepare $7{\sim}10{\mu}m$ of crosslinked monodisperse spheres with four crosslinking agents using $4.68{\mu}m$ poly(methyl methacrylate)(PMMA) seed particles in aqueous-alcoholic media in the absence of the swelling process. The crosslinking agents used were ethylene glycol dimethacrylate(EGDMA), allyl methacrylate(AMA), 1,6-hexanediol diacrylate(HDDA) and trimethylolpropane trimethacrylate(TMPTMA). The effects of the type and concentration of the crosslinking agents on the swelling, pore size, thermal property of the networks and morphology of the particles were studied. The chemical structures and concentrations of the crosslinking agents affected both the swelling ratio and the porosity of the networks. In addition, the chemistry of the reactive vinyl group and chain length of the crosslinking agents affected the stability of the monodisperse particles of the ultimate morphology.

• 폴리머
• /
• 제30권4호
• /
• pp.332-337
• /
• 2006

무유화제중합으로 제조된 폴리 (메틸 메타크릴레이트)(PMMA) 시드 고분자 미립자에 가교단량체인 ethylene glycol dimethacrylate(EGDMA), 1,6-hexanedioldiacrylate(HDDA) 또는 그 혼합액을 흡수시키고, 이를 중합하여 단분산 가교고분자 미립자를 제조할 시 1) 흡수된 가교단량체와 시드 고분자 미립자의 중량비 (흡수율) 변화, 2) 가교단량체 혼합액에서의 EGDMA의 함량비 변화 및 3) 중합개시제의 사용량 변화 등에 따라 제조된 단분산 가교고분자 미립자 및 그의 무전해 니켈도금체의 기계적 물성인 탄성복원율, 압축탄성률, 파괴강도 및 파괴변형률의 변화를 micro compression test(MCT)를 사용하여 측정하였다. 이번 연구를 통해 흡수율의 증가는 파괴강도에만 큰 영향을 미쳤으나, EGDMA의 증가, 중합개시제의 증량 및 무전해 니켈도금 실시 등은 압축탄성률 및 파괴 강도에 동시에 큰 영향을 미침을 알 수 있었다.

• 폴리머
• /
• 제31권5호
• /
• pp.410-416
• /
• 2007

무유화제중합으로 제조된 폴리(메틸 메타크릴레이트) (PMMA) 시드 고분자 미립자에 가교단량체인 HDDA (1,6-hexanediol diacrylate), triEGDMA [tri(ethylene glycol) dimethacrylate] 또는 triEGDMA와 EGDMA (ethylene glycol dimethacrylate)의 혼합액을 흡수시키고, 이를 중합하여 단분산 가교고분자 미립자를 제조할 시 1) 흡수된 가교단량체와 시드 고분자 미립자의 중량비(흡수율) 변화, 2) 가교단량체의 변화, 3) 무전해 니켈도금 및 4) 무전해 (니켈/금)도금에 따른 단분산 가교고분자 미립자의 기계적 물성인 탄성복원율, 압축탄성률, 파괴강도 및 파괴변형률의 변화를 MCT(micro compression test)를 사용하여 측정하였다. 이번 연구를 통해 가교단량체의 흡수율 증가는 가교고분자 미립자의 파괴강도에만 큰 영향을 미쳤으나, 가교고분자 미립자의 무전해 도금은 도금분체의 탄성복원율 및 파괴강도는 감소시키나, 파괴변형률의 경우에는 거의 영향을 미치지 않으며, 압축탄성률의 경우는 $K_{10}$ 및 $K_{20}$는 크게 증가시키나, $K_{30}$ 이후에는 거의 영향을 미치지 못함을 알 수 있었다.

• Macromolecular Research
• /
• 제15권3호
• /
• pp.244-255
• /
• 2007

Nucleation is the most sensitive stage in the preparation of highly cross-linked, monodisperse microspheres by dispersion polymerization, since the addition of a small amount of cross-linker results in particle deformation and coagulation. To overcome these problems, $5\;{\mu}m$ poly(methyl methacrylate) seed particles prepared by dispersion polymerization were used in the preparation of mono disperse, cross-linked PMMA particles containing up to 7 wt% divinylbenzene by seeded batch dispersion polymerization. Spherical particles with a narrow size distribution containing up to 8 wt% of EGDMA were prepared by seeded multi-batch dispersion polymerization processes. These particles were identified by scanning electron microscopy and DSC.

• 한국진공학회:학술대회논문집
• /
• 한국진공학회 2014년도 제46회 동계 정기학술대회 초록집
• /
• pp.430.1-430.1
• /
• 2014

According to advanced nanotechnology in the field of biomedical engineering, many studies of the interaction between topography of surfaces and cellular responses have been focused on nanostructure. In order to investigate this interaction, it is essential to make well-controlled nanostructures. Electron beam lithography (EBL) have been considered the most typical processes to fabricate and control nano-scale patterns. In this work, $TiO_2$ nanowire array was fabricated with hybrid process (top-down and bottom-up processes). Nanodot arrays were patterned on the substrate by EBL process (top-down). In order to control the spacing between nanodots, we optimized the EBL process using Poly(methyl methacrylate) (PMMA) as an electron beam resist. Metal lift-off was used to transfer the spacing-controlled nanodots as a seed pattern of $TiO_2$ nanowire array. Au or Sn nanodots which play an important role for catalyst using Vapor-Liquid-Solid (VLS) method were patterned on the substrate through the lift-off process. Then, the sample was placed in the tube furnace and heated at the synthesis temperature. After heat treatment, $TiO_2$ nanowire array was fabricated from the nanodots through VLS method (bottom-up). These results of spacing-controlled nanowire arrays will be used to study the interaction between nanostructures and cellular responses in our next steps.