• Bulletin of the Korean Chemical Society
• /
• v.19 no.9
• /
• pp.993-999
• /
• 1998

Acid catalyzed hydrolysis of 1-phenoxyethyl propionate, Ⅰ, has been studied using the PM3 method in the gas phase. The first step of the reaction is the protonation of basic sites, three different oxygens in Ⅰ, producing three protonated species Ⅱ, Ⅲ and Ⅳ. All possible reaction pathways have been studied from each protonated structure. Changes in the reaction mechanisms have also been discussed from the results obtained by varying a nucleophile from a water monomer to a water dimer to a complex between one water molecule and an intermediate product (propionic acid or phenol) produced in the preceding unimolecular dissociation processes. Minimum energy reaction pathway is 2-W among the possible pathways, in which water dimer acts as an active catalyst and therefore facilitates the formation of a six-membered cyclic transition state. Lower barrier of 2-W is ascribed to an efficient bifunctional catalytic effect of water molecules. PM3-SM3.1 single point calculations have been done at the gas-phase optimized structure (SM3.1/PM3//PM3) to compare theoretical results to those of experimental work.

• Journal of Environmental Health Sciences
• /
• v.49 no.6
• /
• pp.362-371
• /
• 2023

Background: PM_2.5 pollution has been a persistent problem in South Korea, with concentrations consistently exceeding World Health Organization (WHO) guidelines. The aging of the population in the country further exacerbates the health impacts of PM_2.5 since older adults are more susceptible to the adverse effects of air pollution. Objectives: This study aims to evaluate how the health impact (premature death) due to long-term exposure to PM_2.5 in South Korea could change in the future according to the trend of change in the country's population structure. Methods: The study employs a relative risk function, which accounts for age-specific relative risks, to assess the changes in premature deaths by age and region at the average annual PM_2.5 concentration for 2022 and at PM_2.5 concentration improvement levels. Premature deaths were estimated using the Global Exposure Mortality Model (GEMM). Results: The findings indicate that the increase in premature deaths resulting from the projected population structure changes up to 2050 would significantly outweigh the health benefits (reduction in premature deaths) compared to 2012. This is primarily attributed to the rising number of premature deaths among the elderly due to population aging. Furthermore, the study suggests that the effectiveness of the current domestic PM_2.5 standard would be halved by 2050 due to the increasing impact of population aging on PM_2.5-related mortality. Conclusions: The study highlights the importance of considering trends in population structure when evaluating the health benefits of air pollution reduction measures. By comparing and evaluating the health benefits in reflection of changes in population structure to the predicted PM_2.5 concentration improvements at the provincial level, a more comprehensive assessment of regional air quality management strategies can be achieved.

• The Transactions of the Korean Institute of Electrical Engineers B
• /
• v.51 no.11
• /
• pp.601-611
• /
• 2002

As resent trends in structural construction have been to build taller and larger structures than any time in the past, they have had high flexibility and low damping that can cause large vibration response under severe environmental loading such as earthquakes, winds, and mechanical excitations. The damper with mass and sqring is one aproach to safeguarding the structure against excessive vibrations. In this paper, a large capacity hybrid-type linear motor damper(LMD) was designed and fabricated for the application to the vibration control of a large building structure model. It has been designed to be able to move the damper mass, 1,500 kg up to ${\pm}250mm$ strokes at the first mode natural frequency of the building structure model, ${\pm}0.51Hz$. Linear motor is consisted of the fixed coil and the movable NdFeB permanent magnets field part. The PM field part composed magnet modules and iron yoke, is the damper mass itself, 1500kg. LMD therefore has a simplified structure and requires a few elements in the driving system, being compared with a rotary motor damper and a hydraulic damper. However, the manufacture of large PM linear actuator is difficult because of the limit of PM size and the attraction and repulsion at the assembly of PM. Therefore, large damper system is manufactured and tested for dynamic characteristics and frequency response.

• Journal of KIISE:Computer Systems and Theory
• /
• v.31 no.1_2
• /
• pp.10-18
• /
• 2004

Quadtree, which is a hierarchical data structure, is a very important data structure to represent binary images. The linear quadtree representation as a way to store a quadtree is efficient to save space compared with other representations. Therefore, it has been widely studied to develop efficient algorithms to execute operations related with quadtrees. The operations of unaligned linear quadtrees, which are operations among the linear quadtrees with different origin, are able to perform the translated or rotated images efficiently. And this operations requires alignment of the linear quadtrees. In this paper, we present an efficient algorithm to perform alignment of unaligned linear quadtrees, using three-dimensional $n{\pm}n{\pm}n$ processors on RMESH(Reconfigurable MESH). This algorithm has constant-time complexity by using efficient basic operations to route the locational codes of quardtree on the hierarchical structure of $n{\pm}n{\pm}n$ RMESH.

• Clinical and Experimental Reproductive Medicine
• /
• v.38 no.2
• /
• pp.82-86
• /
• 2011

Objective: To evaluate sperm nuclear DNA fragmentation and chromatin structure after 18 hours' incubation at room temperature. Methods: Twenty-eight male partners who participating IVF treatment were prospectively included in this study. Ejaculated sperm count and motility were assessed. The sperm was then immediately processed by the conventional swim-up method. After utilization of some of the sample for routine clinical use, the remainder of each of the samples was divided into two aliquots. One aliquot was immediately assessed for sperm nuclear DNA fragmentation (TUNEL assay) and chromatin structure (toluidine blue [TB] staining). The other aliquot was incubated at room temperature for 18 hours and then assessed by two methods. Only dark-TB sperms were considered as having abnormal chromatin structure. Data before and after extended incubation were compared using a paired Student's $t$-test. Results: Before and after extended culture, nuclear DNA fragmentation assessed by TUNEL was $4.9{\pm}4.7%$ and $7.0{\pm}6.4%$, respectively ($p$=0.008). The proportion of abnormal chromatin structure (dark-TB sperm) was $8.2{\pm}5.6%$ and $10.3{\pm}6.5%$ ($p$ <0.001), before and after incubation, respectively. Conclusion: After 18 hours' incubation at room temperature, sperm nuclear DNA and chromatin structure were significantly affected. The IVF practitioner should bear this information in mind when performing delayed insemination, especially for $in$ $vitro$ maturation cycles.

• Korean Journal of Environment and Ecology
• /
• v.33 no.5
• /
• pp.587-595
• /
• 2019

This study analyzed the influence of the environmental factor of each vegetation type in an urban, mountainous park (Tangeumdae Park in Chungju) on air ion. The measuring points were divided according to the tree species, diameter at breast height, crown density, and layered structure, and the meteorological factors and the air ion were measured. The results of the measurement showed the average generation of positive ions of $610.90{\pm}50.27ea/cm^3$, the average generation of negative ions of $723.58{\pm}64.25ea/cm^3$, and the air ion index of $1.19{\pm}0.10$. The results of the analysis, according to the vegetation type, are as follows. Firstly, the air ion varied according to the species, the chest diameter at breast height, and the layered structure, and was analyzed to be statistically significant. Secondly, the air ion and the vegetation type showed a positive correlation with the species, diameter at breast height, crown density, and layered structure. The cation showed a negative correlation with the species, diameter at breast height, and the crown density, and the anion showed a positive correlation with the species, the diameter at breast height, crown density, and layered structure. Thirdly, the ion index in ridges had a higher correlation with the vegetation type than the meteorological factors. In detail, the correlation was higher in the species > layered structure > crown density > diameter at breast height. This study had the limitation of evaluating air ions in the ridge. Therefore, future studies on air ion should consider both terrain structure and vegetation type and analyze the seasonal changes and comparison.

• Journal of the Korean Vacuum Society
• /
• v.17 no.2
• /
• pp.165-169
• /
• 2008

It is very important to decompose uniformly the metal film in semiconductor devices process. The thickness uniformity of the ITO film by standard magnetron sputtering system are about $\pm4%\sim\pm5%$ and the center of the wafer is more thick than the edge of the wafer. We designed and made the discharge electrode structure and controlled the direction of sputtering materials in magnetron sputtering system. The thickness uniformity are increased to $\pm0.8\sim1.3%$ in 4" wafer using the new sputtering gun in magnetron sputtering system. In wafer to wafer thickness uniformity, $\pm$5.3% are increased to $\pm$1.5% using the new sputtering gun. The thickness uniformity of the Al film are about $\pm$1.0% using the new sputtering gun in magnetron sputtering system.

• Proceedings of the KIEE Conference
• /
• 2004.10a
• /
• pp.6-8
• /
• 2004

Recently, the PM type stepping motor preferred solution for many small electronics position determination devices since it is small in size. Thus, there are glowing demands for permanent magnet(PM) type stepping motor that greater mechanical output, smaller size. This paper deals with a study of the miniaturization of the PM type stepping motor with claw-poles. We introduced the small-sized PM type stopping motor that has new structure and analyzed the magnetic characteristic of it versus general type model using 3-D finite element analysis(FEA).

• Journal of the Korean Vacuum Society
• /
• v.7 no.1
• /
• pp.5-10
• /
• 1998

The geometric structure of dimer atoms on clean Si(001) surface was studied using CAICISS. We confirmed that dimer atoms were certainly buckled, and also found that asymmetry (2$\times$1) and c(4$\times$2) were coexisted. The intradimer bond length and the buckling angle of a dimer measured by CAICISS system were 2.3$\pm$0.1 $\AA$ and 18$\pm$$1^{\circ}$, respectively.

• Journal of the Korean Institute of Illuminating and Electrical Installation Engineers
• /
• v.22 no.3
• /
• pp.34-39
• /
• 2008

The purpose of this paper is characteristic analysis of multi-disk axial-gap pm motor for turbo compressor. The axial-gap permanent magnet motor has shown a growing interest in high-speed application for its high-efficiency, compact size and low vibration characteristics due to core-less structure. To achieve high-power, the axial-gap PM motor has multi-disk structure of stator and rotor disk. Because of its complicated magnetic flux path, it is not easy to calculate a dynamic characteristics using finite element analysis. In this paper, the simplified 2-D unfolded model to predict EMF characteristic is presented. To verify thesuggested 2-D unfolded model analysis of back-EMF characteristic was calculated and compared 3-D finite element. Finally the proposed method is verified by experimental results and shows good agreement with test results.