철제 grain bin(지름 3미터, 높이 3.17미터)을 이용하여 수분함량이 높은 벼(밀양 30호)의 자연통풍건조시험을 우리나라 가을 기후조건하에서 행하였다. 이때의 시료벼의 초기수분함량은 평균 24.5%, 시료 벼의 량은 4.19M/T, bin 내에서의 시료벼 높이는 0.9미터 그리고 풍량은 $4.81\;m^3/min/m^3$이었으며 그 결과는 다음과 같다. 건조시험기간중 외기의 온도는 평균 $10.5^{\circ}C$, 상대습도는 평균 58%이었다. 연속자연통풍 288시간후의 시료벼의 수분함량은 $15{\pm}0.3%$로서, 상하층의 수분함량차이는 약 0.5%이었다. 그리고 평균 건조 속도는 시간당 0.03%이었으며 전기소요량은 1kg의 수분제거량당 0.38KWh이었다. 본시험결과, 상온자연통풍에 의한 in-bin건조방법으로, 생탈곡된 고수분의 벼를 건조할 수 있는 것으로 분석되었다.
In this study, the cutting conditions of moving speed, number of main axial revolutions, etc. are changed for the chrome molybdenum steel (SCM415) material and carbide ball end mill tool to study the changes for processing intensity in the cutting process. The results that confirm the intensity of the measured value of the specimen for SCM415 display the intensity with an average 1.0667 HrC. After the fact cutter, it was able to confirm the average intensity of 8.3815 HrC. In addition, the intensity value after image processing may determine the average intensity survey value of 5.8690 HrC and the different intensity values with image processing after face cutting are shown for an average of ${\pm}2.5125HrC$. The different value of intensity with the specimen and image processing is confirmed for an average of 4.8024 HrC. The results of comparing the intensity following the number of main axial revolutions and moving speed show that the intensity is highest for 3,000 rpm and F200, and lowest for 4,000 rpm and F200.
Lee Jong-Seong;Kim Eun-A;Lee Yong-Hag;Moon Deog-Hwan;Kim Kwang-Jong
대한의생명과학회지
/
제11권2호
/
pp.143-152
/
2005
To investigate the exposure effect of polycyclic aromatic hydrocarbons (PAHs), we analyzed the relationship between urinary 8-hydroxydeoxyguanosine (8-OHdG) concentration and PAHs exposure. The study population contained 44 workers in steel-pipe coating and paint manufacture industries. We measured airborne total PAHs as an external dose, urinary 1-hydroxypyrene (1-OHP) as an internal dose of PAHs exposure, and urinary 8-OHdG as an effective dose of oxidative DNA damage. There was significant correlation between the urinary concentration of l-OHP and the environmental concentration of PAHs, pyrene, urinary cotinine, AST, and GGT. The mean of urinary 8-OHdG was $17.07\pm1.706{\mu}g/g$ creatinine in workers exposed to airborne PAHs. There was significant correlation between the urinary concentration of 8-0HdG and the airborne concentration of PAHs. From the results of stepwise multiple regression analysis about 8-OHdG, significant independents was total PAHs. In this study, there were significant correlation between the urinary concentration of 8-OHdG and the airborne concentration of PAHs. The urinary 1-OHP was effective index as a biomarker of airborne PAHs in workplace. But it was influenced by non-occupational PAHs source, smoking and biomarkers of liver function test.
Purpose: Because of the volume of elective sterilizations performed in the world during the past decade, the vasectomy was a popular method for male sterilization in Korea and this, in turn, had been followed by an increase in the number of patient requiring vasectomy reversal with the high rate of subsequent divorce and remarriage. Recently, many authors have reported high success rates of vasovasostomy using microsurgical techniques and we performed modified two layer vasovasostomy with intravasal silicone tube to increase postoperative patency and pregnacy rate. Methods: Microscopic vasovasostomy was performed in 9 patients and their average age was $35.78{\pm}1.36years$(from 28 years to 44 years) from June 2006 to June 2008 at our department using modified two layer vasovasostomy with silicone tube insertion. Standard Guibor silicone tube, consisting of two 17.7 cm, 0.064 cm diameter, malleable, stainless steel probes connected by 29 cm of silicone tubing wedged onto disposable probes, were used in all cases. Results: Success rates were 88.8 % for patency and pregnancy 44.4 % for pregnancy in modified two layer vasovasostomy with silicone tube insertion. The patency rates were higher in cases of long postoperative day and in cases of short duration of vasectomy and vasovasostomy. Conclusion: We used a modified method to correspond the patency and pregnancy rate in microscopical modified two layer vasovasostomy using the intravasal silicone tube permanently. This method brings normal patency in microsurgical vasovasostomy because the silicone tube prevent obstruction of anastomosed site of the vas permanently.
마그네틱 기어는 두 개 이상의 분리된 장치들 사이에서 기계적인 접촉 없이 토크를 전송한다. 특히, 희토류계 영구자석을 사용한 마그네틱 기어는 고 출력으로 인해 다양한 산업에 적용된다. 따라서 마그네틱 기어는 일반적인 기어를 대체할 수 있다. 본 논문에서는 이차원 유한요소해석을 이용해 평행방향과 할박 자화 마그네틱 기어의 기어비를 선정하고, 내측과 외측 영구자석 두께, 철심 각도, 할박 세그먼트 개수, 내측과 외측 영구자석 자화 패턴과 같은 설계 변수에 따라 토크 해석을 수행하였다. 해석 결과, 개선된 설계변수를 갖는 모델이 초기 설계 모델과 비교해 더 높은 토크를 가짐을 확인하였다.
한국분말야금학회 2006년도 Extended Abstracts of 2006 POWDER METALLURGY World Congress Part2
/
pp.1018-1021
/
2006
Powdered metal parts and components may be carburized successfully in a vacuum furnace by combining carburizing technology $VacCarb^{TM}$ with a hi-tech control system. This approach is different from traditional carburizing methods, because vacuum carburizing is a non-equilibrium process. It is not possible to set the carbon potential as in a traditional carburizing atmosphere and control its composition in order to obtain a desired carburized case. This paper presents test results that demonstrate that vacuum carburizing system $VacCarb^{TM}$ carburized P.M. materials faster than traditional steel with acceptable results. In the experiments conducted, PM samples with the lowest density and open porosity showed a dramatic increase in the surface carbon content up to 2.5%C and a 3 times deeper case. Currently the boost-diffusion technique is applied to control the surface carbon content and distribution in the case. In the first boost step, the flow of the carburizing gas has to be sufficient to saturate the austenite, while avoiding soot deposition and formation of massive carbides. To accomplish this goal, the proper gas flow rate has to be calculated. In the case of P.M. parts, more carbon can be absorbed by the part's surface because of the additional internal surface area created by pores present in the carburized case. This amount will depend on the density of the part, the densification grade of the surface layer and the stage of the surface. "as machined" or "as sintered". It is believed that enhanced gas diffusion after initial evacuation of the P.M. parts leads to faster carburization from within the pores, especially when pores are open . surface "as sintered" and interconnected . low density. A serious problem with vacuum carburizing is delivery of the carbon in a uniform manner to the work pieces. This led to the development of the different methods of carburizing gas circulation such as the pulse/pump method or the pulse/pause technique applied in SECO/WARWICK's $VacCarb^{TM}$ Technology. In both cases, each pressure change may deliver fresh carburizing atmosphere into the pores and leads to faster carburization from within the pores. Since today's control of vacuum carburizing is based largely on empirical results, presented experiments may lead to better understanding and improved control of the process.
This study investigates the microstructure and wear properties of cermet (ceramic + metal) coating materials manufactured using high velocity oxygen fuel (HVOF) process. Three types of HVOF coating layers are formed by depositing WC-12Co, WC-20Cr-7Ni, and Cr3C2-20NiCr (wt.%) powders on S45C steel substrate. The porosities of the coating layers are $1{\pm}0.5%$ for all three specimens. Microstructural analysis confirms the formation of second carbide phases of $W_2C$, $Co_6W_6C$, and $Cr_7C_3$ owing to decarburizing of WC phases on WC-based coating layers. In the case of WC-12Co coating, which has a high ratio of $W_2C$ phase with high brittleness, the interface property between the carbide and the metal binder slightly decreases. In the $Cr_3C_2-20CrNi$ coating layer, decarburizing almost does not occur, but fine cavities exist between the splats. The wear loss occurs in the descending order of $Cr_3C_2-20NiCr$, WC-12Co, and WC-20Cr-7Ni, where WC-20Cr-7Ni achieves the highest wear resistance property. It can be inferred that the ratio of the carbide and the binding properties between carbide-binder and binder-binder in a cermet coating material manufactured with HVOF as the primary factors determine the wear properties of the cermet coating material.
The effects of Quenching and Partitioning (Q&P) and Annealed Martensite (AM) heat treatment on the microstructure and tensile properties were investigated for 0.24C-0.5Si-1.5Mn-1Al steels. The Q&P steels were annealed at a single phase ($\gamma$) or a dual phase (${\gamma}+{\alpha}$), followed by quenching to a temperature between $M_s$ and $M_f$. Then, enriching carbon was conducted to stabilize the austenite through the partitioning, followed by water quenching. The AM steels were intercritically annealed at a dual phase (${\gamma}+{\alpha}$) temperature and austempered at $M_s$ and $M_s{\pm}50^{\circ}C$, followed by cooling in oil quenching. The dual phase Q&P steels showed lower tensile strength and yieldyield strength than those of the single phase Q&P steels, and tThe elongation for the dual phase Q&P steel was partitioning 100s higher than that of that for the single phase Q&P steels as the partitioning time was less than 100s up to partitioning 100s. For AM steels, the tensile/yield strength decreased and the total elongation increased as the austempering temperature increased. The stability of the retained austenite controlled the elongation for Q&P steels and the volume fraction of the retained austenite controlled the elongation for AM steels.
Chungnam region accounts for the largest SOX (22.8%) emission with the second-largest NOX (10.8%) emission in Korea due to the integration of many large industrial sources including a steel mill, coal-fired power plants, and petrochemical complex. Air pollutants emitted by large industrial sources can cause harmful problems to humans and the environment. Thus, it is necessary to understand dispersion patterns of air pollutants from large industrial sources in Chungnam to characterize atmospheric contamination in Chungnam and the surrounding area. In this study, seasonal atmospheric dispersion characteristics for SOX, NOX, and PM2.5 from ten major point sources in Chungnam were evaluated using HYSPLIT 4 model, and their contributions to SO2, NO2 concentrations in the regions near the source areas were estimated. The predictions of the HYSPLIT 4 model show a seasonal different dispersion pattern, in which air pollutants were dispersed toward the southeast in winter while, northeast in summer. In summer, due to weaker wind speed, air pollutants concentrations were higher than in winter, and they were dispersed to the metropolitan area. The local emissions of air pollutants in Taean area had a greater influence on the ambient SO2 and NO2 concentrations at Taean, whereas SOX and NOX emissions from large sources located at Seosan showed relatevely little effect on the ambient ambient SO2 and NO2 concentrations at Seosan.
본 실험에 사용된 토양으로는 U. S EPA Synthetic Soil Matrix를 선택하였고, 오염된 토양을 만들기 위하여 건조 토양의 무게 백분율로 4.79%에 해당하는 양만큼의 Pyrene을 Dichlomethane에 녹여 고체상태인 Pyrene을 토양에 오염시켰다. 오염된 시료(50$\pm$0.1mg)를 전기적으로 열적처리하는 열반응기는 외경이 20cm, 높이가 30cm인 실린더 형태로서 Pyrex재질로 제작하고 윗부분과 아래 부분은 알루미늄 플랜지로 밀폐시켰다. 내부에는 stainless steel판(3.5cm$\times$13cm$\times$0.00254m, 3.5cm$\times$13cm$\times$0.00254cm, 302 stainless steel shim)과 두개의 전극봉으로 구성되었다. 각각의 토양을 열적처리하기 위한 조건은 최고온도가 45$0^{\circ}C$에 가온율이 $1130^{\circ}C$/s인 경우, 최고온도 $760^{\circ}C$에 가온율이 $950^{\circ}C$/s인 경우 그리고 최고온도가 $977^{\circ}C$ 에 가온율이 $977^{\circ}C$ /s인 경우를 선정하였다. 토양을 열처리한 후 알루미늄 foil funnel과 glass filter paper에서 타르를 포집하였으며, 타르와 잔류토양 시료내의 물질은 Dichlorornethane을 이용하여 추출하였고 이를 HPLC로 측정하였다. 실험결과, 최고온도가 $455^{\circ}C$ 인 경우 Tar Filter에 포집된 Tar색은 White이었으며 대부분의 성분이 Pyrene으로 나타났다. 최고온도가 $760^{\circ}C$ 인 경우는 Tar의 색이 Pink brown이었으며, 약간의 그을음덩어리(Cluster)가 전극관과 Tar Filter의 표면에서 발견되었다. $977^{\circ}C$ 의 경우 Tar색은 Dark brown이었다. Tar성분을 추출하여 HPLC로 분석한 결과, 6개의 Bipyrene의 isomer가 발견되었으며 그 중에서 bacterial cell이나 human cell에 돌연변이를 유발할 수 있는 매우 유해한 성분으로 분류되는 Cyclopenta(cd) pyrene(CPEP)는 온도 조건 $455^{\circ}C$ 에서는 검출되지 않지만 $760^{\circ}C$ 및 $977^{\circ}C$ 에서는 검출되는 특징을 보였다. 그밖에 미미한 양이지만 C14H10과 C15H10이 검출되었다.
본 웹사이트에 게시된 이메일 주소가 전자우편 수집 프로그램이나
그 밖의 기술적 장치를 이용하여 무단으로 수집되는 것을 거부하며,
이를 위반시 정보통신망법에 의해 형사 처벌됨을 유념하시기 바랍니다.
[게시일 2004년 10월 1일]
이용약관
제 1 장 총칙
제 1 조 (목적)
이 이용약관은 KoreaScience 홈페이지(이하 “당 사이트”)에서 제공하는 인터넷 서비스(이하 '서비스')의 가입조건 및 이용에 관한 제반 사항과 기타 필요한 사항을 구체적으로 규정함을 목적으로 합니다.
제 2 조 (용어의 정의)
① "이용자"라 함은 당 사이트에 접속하여 이 약관에 따라 당 사이트가 제공하는 서비스를 받는 회원 및 비회원을
말합니다.
② "회원"이라 함은 서비스를 이용하기 위하여 당 사이트에 개인정보를 제공하여 아이디(ID)와 비밀번호를 부여
받은 자를 말합니다.
③ "회원 아이디(ID)"라 함은 회원의 식별 및 서비스 이용을 위하여 자신이 선정한 문자 및 숫자의 조합을
말합니다.
④ "비밀번호(패스워드)"라 함은 회원이 자신의 비밀보호를 위하여 선정한 문자 및 숫자의 조합을 말합니다.
제 3 조 (이용약관의 효력 및 변경)
① 이 약관은 당 사이트에 게시하거나 기타의 방법으로 회원에게 공지함으로써 효력이 발생합니다.
② 당 사이트는 이 약관을 개정할 경우에 적용일자 및 개정사유를 명시하여 현행 약관과 함께 당 사이트의
초기화면에 그 적용일자 7일 이전부터 적용일자 전일까지 공지합니다. 다만, 회원에게 불리하게 약관내용을
변경하는 경우에는 최소한 30일 이상의 사전 유예기간을 두고 공지합니다. 이 경우 당 사이트는 개정 전
내용과 개정 후 내용을 명확하게 비교하여 이용자가 알기 쉽도록 표시합니다.
제 4 조(약관 외 준칙)
① 이 약관은 당 사이트가 제공하는 서비스에 관한 이용안내와 함께 적용됩니다.
② 이 약관에 명시되지 아니한 사항은 관계법령의 규정이 적용됩니다.
제 2 장 이용계약의 체결
제 5 조 (이용계약의 성립 등)
① 이용계약은 이용고객이 당 사이트가 정한 약관에 「동의합니다」를 선택하고, 당 사이트가 정한
온라인신청양식을 작성하여 서비스 이용을 신청한 후, 당 사이트가 이를 승낙함으로써 성립합니다.
② 제1항의 승낙은 당 사이트가 제공하는 과학기술정보검색, 맞춤정보, 서지정보 등 다른 서비스의 이용승낙을
포함합니다.
제 6 조 (회원가입)
서비스를 이용하고자 하는 고객은 당 사이트에서 정한 회원가입양식에 개인정보를 기재하여 가입을 하여야 합니다.
제 7 조 (개인정보의 보호 및 사용)
당 사이트는 관계법령이 정하는 바에 따라 회원 등록정보를 포함한 회원의 개인정보를 보호하기 위해 노력합니다. 회원 개인정보의 보호 및 사용에 대해서는 관련법령 및 당 사이트의 개인정보 보호정책이 적용됩니다.
제 8 조 (이용 신청의 승낙과 제한)
① 당 사이트는 제6조의 규정에 의한 이용신청고객에 대하여 서비스 이용을 승낙합니다.
② 당 사이트는 아래사항에 해당하는 경우에 대해서 승낙하지 아니 합니다.
- 이용계약 신청서의 내용을 허위로 기재한 경우
- 기타 규정한 제반사항을 위반하며 신청하는 경우
제 9 조 (회원 ID 부여 및 변경 등)
① 당 사이트는 이용고객에 대하여 약관에 정하는 바에 따라 자신이 선정한 회원 ID를 부여합니다.
② 회원 ID는 원칙적으로 변경이 불가하며 부득이한 사유로 인하여 변경 하고자 하는 경우에는 해당 ID를
해지하고 재가입해야 합니다.
③ 기타 회원 개인정보 관리 및 변경 등에 관한 사항은 서비스별 안내에 정하는 바에 의합니다.
제 3 장 계약 당사자의 의무
제 10 조 (KISTI의 의무)
① 당 사이트는 이용고객이 희망한 서비스 제공 개시일에 특별한 사정이 없는 한 서비스를 이용할 수 있도록
하여야 합니다.
② 당 사이트는 개인정보 보호를 위해 보안시스템을 구축하며 개인정보 보호정책을 공시하고 준수합니다.
③ 당 사이트는 회원으로부터 제기되는 의견이나 불만이 정당하다고 객관적으로 인정될 경우에는 적절한 절차를
거쳐 즉시 처리하여야 합니다. 다만, 즉시 처리가 곤란한 경우는 회원에게 그 사유와 처리일정을 통보하여야
합니다.
제 11 조 (회원의 의무)
① 이용자는 회원가입 신청 또는 회원정보 변경 시 실명으로 모든 사항을 사실에 근거하여 작성하여야 하며,
허위 또는 타인의 정보를 등록할 경우 일체의 권리를 주장할 수 없습니다.
② 당 사이트가 관계법령 및 개인정보 보호정책에 의거하여 그 책임을 지는 경우를 제외하고 회원에게 부여된
ID의 비밀번호 관리소홀, 부정사용에 의하여 발생하는 모든 결과에 대한 책임은 회원에게 있습니다.
③ 회원은 당 사이트 및 제 3자의 지적 재산권을 침해해서는 안 됩니다.
제 4 장 서비스의 이용
제 12 조 (서비스 이용 시간)
① 서비스 이용은 당 사이트의 업무상 또는 기술상 특별한 지장이 없는 한 연중무휴, 1일 24시간 운영을
원칙으로 합니다. 단, 당 사이트는 시스템 정기점검, 증설 및 교체를 위해 당 사이트가 정한 날이나 시간에
서비스를 일시 중단할 수 있으며, 예정되어 있는 작업으로 인한 서비스 일시중단은 당 사이트 홈페이지를
통해 사전에 공지합니다.
② 당 사이트는 서비스를 특정범위로 분할하여 각 범위별로 이용가능시간을 별도로 지정할 수 있습니다. 다만
이 경우 그 내용을 공지합니다.
제 13 조 (홈페이지 저작권)
① NDSL에서 제공하는 모든 저작물의 저작권은 원저작자에게 있으며, KISTI는 복제/배포/전송권을 확보하고
있습니다.
② NDSL에서 제공하는 콘텐츠를 상업적 및 기타 영리목적으로 복제/배포/전송할 경우 사전에 KISTI의 허락을
받아야 합니다.
③ NDSL에서 제공하는 콘텐츠를 보도, 비평, 교육, 연구 등을 위하여 정당한 범위 안에서 공정한 관행에
합치되게 인용할 수 있습니다.
④ NDSL에서 제공하는 콘텐츠를 무단 복제, 전송, 배포 기타 저작권법에 위반되는 방법으로 이용할 경우
저작권법 제136조에 따라 5년 이하의 징역 또는 5천만 원 이하의 벌금에 처해질 수 있습니다.
제 14 조 (유료서비스)
① 당 사이트 및 협력기관이 정한 유료서비스(원문복사 등)는 별도로 정해진 바에 따르며, 변경사항은 시행 전에
당 사이트 홈페이지를 통하여 회원에게 공지합니다.
② 유료서비스를 이용하려는 회원은 정해진 요금체계에 따라 요금을 납부해야 합니다.
제 5 장 계약 해지 및 이용 제한
제 15 조 (계약 해지)
회원이 이용계약을 해지하고자 하는 때에는 [가입해지] 메뉴를 이용해 직접 해지해야 합니다.
제 16 조 (서비스 이용제한)
① 당 사이트는 회원이 서비스 이용내용에 있어서 본 약관 제 11조 내용을 위반하거나, 다음 각 호에 해당하는
경우 서비스 이용을 제한할 수 있습니다.
- 2년 이상 서비스를 이용한 적이 없는 경우
- 기타 정상적인 서비스 운영에 방해가 될 경우
② 상기 이용제한 규정에 따라 서비스를 이용하는 회원에게 서비스 이용에 대하여 별도 공지 없이 서비스 이용의
일시정지, 이용계약 해지 할 수 있습니다.
제 17 조 (전자우편주소 수집 금지)
회원은 전자우편주소 추출기 등을 이용하여 전자우편주소를 수집 또는 제3자에게 제공할 수 없습니다.
제 6 장 손해배상 및 기타사항
제 18 조 (손해배상)
당 사이트는 무료로 제공되는 서비스와 관련하여 회원에게 어떠한 손해가 발생하더라도 당 사이트가 고의 또는 과실로 인한 손해발생을 제외하고는 이에 대하여 책임을 부담하지 아니합니다.
제 19 조 (관할 법원)
서비스 이용으로 발생한 분쟁에 대해 소송이 제기되는 경우 민사 소송법상의 관할 법원에 제기합니다.
[부 칙]
1. (시행일) 이 약관은 2016년 9월 5일부터 적용되며, 종전 약관은 본 약관으로 대체되며, 개정된 약관의 적용일 이전 가입자도 개정된 약관의 적용을 받습니다.