• 한국분말야금학회:학술대회논문집
• /
• 한국분말야금학회 1994년도 춘계학술대회강연 및 발표대회 강연및 발표논문 초록집
• /
• pp.7-7
• /
• 1994

For more than a decade components of low alloy iron powder with nickel and/or molybdenum for general engineering applications have been manufactured from powder metal. In the time to come such PM steel components will gain increasing significance. Because of various manufacturing difficulties they are mostly produced in two separate steps - sintering and hardening - which means high energy and labour requirements. The paper describes how such PM components are produced in just one run through a conveyor belt furnace with automatic atmosphere control and gas quenching zone. Energy and labour costs are low and reproducible quality is exceilent. The mechanical properties obtained with some powder alloys are presented as well.

• 대기
• /
• 제33권3호
• /
• pp.319-330
• /
• 2023

As the need for PM type observation increases, Surface Particulate Matter Network (SPARTAN), PM samplers analyzes aerosol samples for PM mass concentration and chemical composition, were recently installed at two sites: Yonsei University at Seoul and Ulsan Institute of Science and Technology (UNIST) at Ulsan. These SPARTAN filter samplers and nephelometers provide the PM_2.5 mass concentration and chemical speciation data with aerosol type information. We introduced the overall information and installation of SPARTAN at the field site in this study. After installation and observation, both Seoul and Ulsan sites showed a similar time series pattern with the daily PM_2.5 mass concentration of SPARTAN and the data of Airkorea. In particular, in the case of high concentrations of fine particles, daily average value of PM_2.5 was relatively well-matched. During the Yonsei University observation period, high concentrations were displayed in the order of sulfate, black carbon (BC), ammonium, and calcium ions on most measurement days. The case in which the concentration of nitrate ions showed significant value was confirmed as the period during which the fine dust alert was issued. From the data analysis, SPARTAN data can be analyzed in conjunction with the existing urban monitoring network, and it is expected to have a synergetic effect in the research field. Additionally, the possibility of being analyzed with optical data such as AERONET is presented. In addition, the method of installing and operating SPARTAN has been described in detail, which is expected to help set the stage for the observation system in the future.

• 대한교통학회지
• /
• 제29권2호
• /
• pp.123-131
• /
• 2011

본 연구에서는 지표면과 대기사이의 열-에너지 균형원리를 이용한 노면온도예측모형을 개발하였다. 본 연구에서 개발된 노면온도예측모형은 두 가지 모듈로 구성되는데 Canopy 1은 지표면과 대기 간의 열 교환을 묘사하기 위한 것이고, Canopy 2는 열에너지 교환 과정에서 포장체 특성을 반영하기 위한 것이다. 모형 수행에 필요한 다양한 입력변수는 기상청으로부터 수집하였다. 개발된 모형의 성능을 평가하기 위해 청원-상주 간 고속도로 상 문의교 지점에 설치된 접촉식 노면온도측정센서로부터 수집한 노면온도자료와 모형 수행을 통해 나온 결과 값을 비교 하였다. 이러한 비교는 동절기(12월)와 동절기 외 기간(10월)에 걸쳐 수행되었다. 비교 결과, 두 온도의 평균오차 값이 ${\pm}2^{\circ}C$ 범위 내에 있어, 모형의 성능이 매우 우수한 것으로 판단된다. 이러한 연구는 동절기 도로관리에 다양하게 사용될 것으로 사료되고, 특히 도로 기상정보체계 운영에 핵심이 되는 노면온도 예측 알고리즘으로 사용될 수 있는 기초 연구가 될 것이다.

• 한국지구과학회지
• /
• 제21권1호
• /
• pp.51-58
• /
• 2000

황해지역에서 생성 및 배출되는 자연황화합물의 규모를 정량적으로 구명하기 위한 노력의 일환으로, 본 연구진은 황해에 위치한 덕적도를 주 측정점으로 설정하고 대기 중에 존재하는 DMS의 농도분포를 1999년 4월과 9월 2차례의 집중측정기간을 통해 측정하였다. 그리고 이에 덧붙여 1999년 6월에는 청도-인천간 해상실험을 통해 황해상의 DMS 농도를 측정하였다. 덕적도를 중심으로 시행한 양 측정기간 중 DMS의 농도값은 4월 측정의 경우 평균과 표준오차가 $24.0{\pm}40.5$ pptv(n=40)인데 반해 9월 측정의 경우 $61.1{\pm}37.9$ pptv(n=35)로 나타났다. 그리고 선상실험에서 측정한 DMS 값은 대체로 배경농도에 가까운 낮은 농도범위를 갖는 것으로 밝혀졌다. DMS의 농도분포는 일반적으로 불규칙한 양상을 보였지만, 주변 기상인자의 변화경향과 유사하게 변화하는 것으로 나타났다. 본문에서는 이러한 연구결과와 기존의 연구결과 등을 연계하여 잠정적인 연간 배출량규모를 4Gg 대로 추정하였다. 이러한 배출규모는 과거 제주지역 등을 중심으로 측정한 결과에 비해 상대적으로 낮은 수치인데, 시간적 및 공간적으로 대표성이 강한 보다 객관적인 배출량을 산정하기 위해서는 추가적인 측정 자료의 축적이 요구된다.

• 한국산업보건학회지
• /
• 제25권3호
• /
• pp.380-391
• /
• 2015

Objectives: The objective of this study is to assess airborne particulate matter pollution and its effect on health of residents living near Ansim Briquette Fuel Complex and its vicinities. Also, this study measured and analyzed the concentration of TSP, $PM_{10}$, $PM_{2.5}$, and heavy metals which influences on the environmental and respiratory disease in Ansim Briquette Fuel Complex, Daegu, Korea. Methods: In this study, we analyzed various environmental pollutants such as particulate matter and heavy metals from Ansim Briquette Fuel Complex that adversely affected local residents's health. In particular, we verified the concentration distribution and characteristics of exposure for TSP, $PM_{10}$, and $PM_{2.5}$ among particulate matters, and heavy metals(Cd, Cr, Cu, Mn, Ni, Pb, Fe, Zn, and Mg). In that regard, the official test method on air pollution in Korea for analysis of particulate matter and heavy metal in atmosphere were conducted. The large capacity air sampling method by the official test method on air pollution in Korea were applied for sampling of heavy metals in atmosphere. In addition, we evaluated the concentration of seasonal environmental pollutants for each point of residence in Ansim Briquette Fuel Complex and surrounding area. The sampling measured periods for air pollutants were from August 11, 2013 to February 21, 2014. Furthermore, we measured and analyzed the seasonal concentrations(summer, autumn and winter). Results: The average concentration for TSP, $PM_{10}$, and $PM_{2.5}$ by direct influence area at Ansim Briquette Fuel Complex were 1.7, 1.4 and 1.9 times higher than reference region. In analysis results of seasonal concentrations for particulate matter in four direct influence and reference area, concentration levels for winter were generally somewhat higher than concentrations for summer and autumn. The average concentrations for Cd, Cr, Mn, Ni, Pb, Fe, and Zn in direct influence area at Ansim Briquette Fuel Complex were $0.0008{\pm}0.0004{\mu}g/Sm^3$, $0.0141{\pm}0.0163{\mu}g/Sm^3$, $0.0248{\pm}0.0059{\mu}g/Sm^3$, $0.0026{\pm}0.0011{\mu}g/Sm^3$, $0.0272{\pm}0.0084{\mu}g/Sm^3$, $0.4855{\pm}0.1862{\mu}g/Sm^3$, and $0.3068{\pm}0.0631{\mu}g/Sm^3$, respectively. In particularly, the average concentrations for Cd, Cr, Mn, Ni, Pb, Fe, and Zn in direct influence area at Ansim Briquette Fuel Complex were 1.9, 3.6, 2.1, 1.9, 1.4, 2.6, and 1.2 times higher than reference area, respectively. The continuous monitoring and management were required for some heavy metals such as Cr and Ni. Moreover, the average concentration in winter for particulate matter in direct influence area at Ansim Briquette Fuel Complex were generally higher than concentrations in summer and autumn. Also, average concentrations for TSP, $PM_{10}$, and $PM_{2.5}$ were from 1.5 to 2.0 times, 1.2 to 1.8 times, and 1.1 to 2.3 times higher than reference area, respectively. In results for seasonal atmospheric environment, TSP, $PM_{10}$, $PM_{2.5}$, and heavy metal concentrations in direct influence area were higher than reference area. Especially, the concentrations in C station were a high level in comparison with other area. Conclusions: In the results, some particulate matters and heavy metals were relatively high concentration, in order to understand the environmental pollution level and health effect in surrounding area at Ansim Briquette Fuel Complex. The concentration of some heavy metals emitted from direct influence area at Ansim Briquette Fuel Complex were relatively higher than reference area. In particular, average concentration for heavy metals in this study were higher than average concentrations in air quality monitoring station for heavy metal for 7 years in Deagu metropolitan region. Especially, the residents near Ansim Briquette Fuel Complex may be exposed to the pollutants(TSP, $PM_{10}$, $PM_{2.5}$, and heavy metals, etc) emitted from the factories in Ansim Briquette Fuel Complex.

• Journal of Yeungnam Medical Science
• /
• 제9권1호
• /
• pp.54-67
• /
• 1992

1991년 10월부터 1992년 3월까지 부산시에 소재하는 세개 종합병원 임상 각 과의 비정신과 환자 497명과 DSM-III-R진단 기준에 의거하여 정신장애로 진단되어 입원중인 정신과 환자 42명을 대상으로 신불안 우울척도(NADS)와 정신증 척도(PSCS)를 사용하여 평가한 결과는 다음과 같다. 비정신과 환자군의 불안 우울 점수의 평균은 $34.4{\pm}10.4$, 정신과 환자의 점수는 $50.5{\pm}18.3$으로 정신과 환자군이 유의하게 높았다(P<0.001). 비정신과 환자의 정신증 점수 평균은 $3.9{\pm}4.4$, 정신과 환자군은 $20.3{\pm}9.8$로 정신과 환자군이 유의하게 높았다(P<0.001). 사회정신의학적 요인들중 불안 우울 및 정신증 성적에 공통적으로 유의한 영향을 끼친것은 가정분위기 및 가족과의 친숙도에 불만족인 경우(각각 P<0.001, P<0.001) 및 미래 현재 과거의 자아상에 대한 태도에 있어서 비관적인 경우(각각 P<0.001, P<0.001, P<0.001), 과거 정신과적 치료 및 입원 경험이 있었던 경우(각각 P<0.01, P<0.01)등이었다. 불안 우울 척도와 정신증(${\gamma}$ = 0.74), 과거 자아상과 현재 자아상에 대한 태도(${\gamma}$ = 0.45), 현재 자아상과 미래 자아상에 대한 태도(${\gamma}$ = 0.45), 과거 자아상과 미래 자아상(${\gamma}$ = 0.34) 가정 분위기 및 가족과의 친숙도 (${\gamma}$ = 0.49) 사이에 상관관계가 있었다. 희귀분석결과 불안 우울 정도를 설명 예측할 수 있는 변수들의 중요도는 현재 자아상에 대한 태도, 가족과의 친숙도, 미래의 자아상에 대한 태도, 과거 자아상에 대한 태도, 가정 분위기 순이었다. 불안 우울 및 정신증 성적 결과에 따라서 판별 분석 결과, 집단이 잘못 분류된 사례는 비정신과 환자군 중 22명, 정신과 환자군중 2명이었다.

• 전기학회논문지
• /
• 제63권11호
• /
• pp.1575-1581
• /
• 2014

In this paper, eddy current loss, iron loss and heat transfer of PMSG with 2,000kW capacities were analyzed for wind turbine. The PMSG with 3 split magnet was analyzed using ansoft maxwell commercial program and, generator was tested by Back to Back converter with no load condition at laboratory. Rotor surface temperature was measured by Pt100 sensors for investigating heat transfer from rotor to atmosphere. The simulation results shows 27.4kW eddy current loss in no load condition and 50.2kW eddy current loss in rated load condition with 3 split magnet, and also shows 4.3kW iron loss in no load condition and 7.3kW iron loss rated load condition. The heat transfer coefficient of convection between rotor surface and atmosphere was investigated by $9.6W/m^2{\cdot}K$. Therefore the heat transfer from rotor to atmosphere was about 17kW(54%) and from rotor to air-gap was about 14.6kW(46%) in no load condition. It is identified that the cooling system for stator have to include the 46% of iron loss, and heat dissipation structure of rotor surface have to be suggested and designed for efficiency improvement of generator.

• 한국전기전자재료학회논문지
• /
• 제12권1호
• /
• pp.35-43
• /
• 1999

Microstructures and dielectric properties of (Sr$\_$1-x/Ca$\_$x/) TiO$_3$-0.006Nb$_2$O$\_$5/ (0.05$\leq$x$\leq$0.2) boundary layer ceramics were investigated. The samples fired in a reducing atmosphere(N$_2$) were painted on the surface with CuO paste for the subsequent grain boundary diffusion, and then annealed at 1100$^{\circ}C$ for 2 hrs. The metal oxide of CuO infiltrated by thermal diffusion from surface of sample presents continuously in not grain but only grain boundary, and makes up thin boundary phase. The SEM photo, and EDAX revealed that CuO was penetrated rapidly into the bulk along the grain boundaries during the annealing. The average grain sizes is continuously increased as the content of substitutional Ca is increased from 5[mol%] to 15[mol%], but the average grain size of the sample with content of 20[mol%] Ca is slightly decreased. In the samples with content of 10∼15[mol%] Ca, excellent dielectric properties were obtained as follows; dielectric constant <25000, dielectric loss <0.3[%], and capacitance change rate as a function of temperature <${\pm}$10[%], respectively. All samples in this study exhibited dielectric relaxation with frequency as a functior of the temperature.

• 한국대기환경학회지
• /
• 제25권6호
• /
• pp.550-561
• /
• 2009

This study is to investigate the air pollution characteristics of an industrialized midsize west-coastal city by comparing air quality to a neighboring inland city. The hourly averaged data of $O_3$, $SO_2$, $NO_2$, CO, and $PM_{10}$ measured from continuous air quality monitoring sites in Gunsan (coastal) and Jeonju (inland) were analyzed. The data set covers the period from 2004 to 2006. The annual average concentrations of the air pollutants in two cities were compared in their abundances and temporal trends as well. $O_3$ and $SO_2$ in Gunsan were relatively higher than those in Jeonju, while vice versa in case of $NO_2$ and $PM_{10}$. It seems that heavy automobile emissions from Jeonju mainly bring on higher $NO_2$ and $PM_{10}$ than those in Gunsan on annual base. $NO_2$ concentrations in both cities showed bimodal diurnal variations with peaks in the morning and in the late evening. These peaks correspond to the coupled effects of rush hour traffic and meteorological conditions (i.e., variation of mixing height and dispersion conditions). Maximum hourly averages of $NO_2$ ranged from 18 ppb to 28 ppb at Jeonju, and from 12 ppb to 20 ppb at Gunsan. $O_3$ showed typical diurnal variation with a maximum in the afternoon between 14:00 and 16:00 LST. Diurnal variations of CO and $PM_{10}$ were similar to $NO_2$ while $SO_2$ was similar to $O_3$. Seasonal variations of $PM_{10}$ in both cities indicated that their concentrations during spring season were significantly high. Asian dust storms occur frequently during spring and seem to affect increase in $PM_{10}$. High $O_3$ and $PM_{10}$ days were selected from both cities. The analyses based on the HYSPLIT trajectory model during the high $O_3$ and $PM_{10}$ showed these episodes (six cases) were mostly coincident with Asian dust storm originated from northern China and Mongolia. However, these high air pollution episodes in the west coastal cities may not only be caused by the Asian dust but also affected by other air pollutants transported from China accompanying the Asian dust.

• Journal of Korean Society for Atmospheric Environment
• /
• 제11권E호
• /
• pp.55-62
• /
• 1995

The distribution of airborne mercury was investigated from several districts of Seoul, five other major cities and two rural areas during the period April, 1994 to March, 1995. The method used in this study involves absorption of gaseous mercury on CHromosorb$^R$ A coated with gold and detection by cold vapor atomic absorption spectroscopy. The atmospheric mercury concentrations in Seoul ranged from N.D. to 120.17 ng m$^3$ (mean 27.01 $\pm 9.42 ng m^{-3}, N=139$), while those in rural areas ranged from 1.72 to 8.24 ng $m^{-3} (mean 4.57 \pm 3.07 ng m^{-3}, N=5$). The spatial distribution characteristics of mercury distribution in urban air were examined by comparing mercury levels as a function of the distance from the urban center. Temporal distribution trends of airborne mercury were also studied using the monthly mean mercury data of various districts in Seoul. The atmospheric mercury concentration around Mokdong wastes incinerator in Seoul were also investigated.