• 동력기계공학회지
• /
• 제7권4호
• /
• pp.12-18
• /
• 2003

Various measures have been tried to reduce the NOx emission from diesel engine, but with partial success because the mechanisms of NOx and PM formations appear to have trade-off relation between each other. Therefore it has been known to be difficult to reduce NOx emission and PM emission simultaneously. Two stage combustion method i,e. a combustion process which has rich combustion stage and lean combustion stage one by one, has been developed successfully to reduce NOx formation in the continuous combustion chambers such as in the boilers. But until yet it is not successful to apply the same method in intermittent combustion chamber like in the diesel engine cylinder, as it was, only several research works were carried out. In this study, devised was a uniquely shaped combustion chamber with reformed piston crown intended to keep fuel-rich condition during early stage of combustion and fuel-lean condition during next stage. It was found that the NOx emission decreased significantly at various conditions of operation with the two stage combustion type engines of PR20 type, but other values such as smoke, CO and specific fuel consumption deteriorated as usual.

• 한국대기환경학회지
• /
• 제20권2호
• /
• pp.263-276
• /
• 2004

According to the annual emission estimates of U.S.A., fugitive dust, the particulate matter entrained in the ambient air which is caused from man-made or natural activities such as movement of soil, vehicles, equipments and windblown dust, contributes 90% of PM$_{10}$ emission. In spite of an importance of fugitive dust emission in PM$_{10}$ estimation, it is excluded in the national emission inventory of Korea so far. In this paper, an emission inventory of fugitive dust for each region and in major cities throughout the country, which is the first time in Korea these values have been compiled, is presented. Sources of fugitive dust emission have been classified into paved/unpaved roads, construction operations, agricultural operations, and natural sources. The emission factors of the existing fugitive dust emission were reassessed in a way that significantly improved the reliability of the estimated result. The Korea's first national emission inventory of fugitive dust by administrative districts proposed in this paper would provide scientific reference data for establishing an reduction strategy of PM$_{10}$ and preparing effective control measures, and would contribute to academic achievement in the atmospheric environments field and the establishment of CAPSS (Clean Air Policy Support System).stem).

• Asian Pacific Journal of Cancer Prevention
• /
• 제16권2호
• /
• pp.607-611
• /
• 2015

Background: Chronic respiratory disease is an important factor for development of lung cancer. To explore the influence of hazy weather on respiratory diseases and its variation the present study was conducted. Materials and Methods: Data from air pollution surveillance from January to October 2014 and case records of visiting patients in the $263^{th}$ Hospital of Chinese PLA in the corresponding period were collected to analyze the relevance between different degrees of air pollution (hazy weather) and the number of visiting patients in Department of Respiratory Disease. Results: Air quality index (AQI) of hazy weather had significantly positive association with particulate matter 2.5 ($PM_{2.5}$) and the number of patients with 5 kinds of respiratory diseases i and different pollutants had distinct influences on various respiratory diseases. Conclusions: The degree of air pollution in Beijing City is in close association with the number of patients with respiratory diseases, in which $PM_{2.5}$ and $SO_2$ are in more significant influences on all respiratory diseases. This could have essential implications for lung cancer development in China.

• Journal of Advanced Marine Engineering and Technology
• /
• 제34권2호
• /
• pp.243-249
• /
• 2010

디젤기관에 있어서 PM과 NO의 동시저감을 위한 에멀전연료의 적용은 급속도로 발전되어져왔다. 하지만, C중유 에멀젼연료의 연소계측 해석은 다른 연료에 비하여 복잡한 연소형태 때문에 어려움이 많다. 본 연구에서는 높은 압력과 온도의 정적연소실에서 에멀젼 C중유를 분사 연소시켜, 연소해석에 대한 실질적인 근거를 제시한다.

• 한국입자에어로졸학회지
• /
• 제5권4호
• /
• pp.171-178
• /
• 2009

$PM_{2.5}$ is one of critical air pollutants due to its high absorbability of heavy metallic fumes, PAH and bacillary micro organisms. Such a fine particulate matter is often formed through various nucleation processes including condensation. This study attempts to find the nucleation behaviors of $PM_{2.5}$ arisen from coal power stations using a classical heterogeneous Fletcher's theory. The numerical simulation by C-language could approximate the nucleation process of $PM_{2.5}$ from water vapor, of which approach revealed the required energy for embryo formation and embryo size and nucleation rate. As a result of the calculation, it was found that wetting agents could affect the particle nucleation in vapor condensation. In particular, critical contact angle relates closely with the vapor saturation. Particle condensation could be reduced by lowering the angles. The wetting agents aid to decrease the contact angle and surface tensions, thereby may contribute to save the formation energy.

• 한국대기환경학회지
• /
• 제24권5호
• /
• pp.604-612
• /
• 2008

The ozone concentration is one of the important environmental issue for measurement of the atmospheric condition of the country. This study focuses on applying the Autoregressive Error (ARE) model for analyzing the ozone data at middle part of the Gyeonggi-Do, Anyang monitoring site in Korea. In the ARE model, eight meteorological variables and four pollution variables are used as the explanatory variables. The eight meteorological variables are daily maximum temperature, wind speed, amount of cloud, global radiation, relative humidity, rainfall, dew point temperature, and water vapor pressure. The four air pollution variables are sulfur dioxide $(SO_2)$, nitrogen dioxide $(NO_2)$, carbon monoxide (CO), and particulate matter 10 (PM10). The result shows that ARE models both overall and monthly data are suited for describing the oBone concentration. In the ARE model for overall ozone data, ozone concentration can be explained about 71% to by the PM10, global radiation and wind speed. Also the four types of ARE models for high level of ozone data (over 80 ppb) have been analyzed. In the best ARE model for high level of ozone data, ozone can be explained about 96% by the PM10, daliy maximum temperature, and cloud amount.

• 한국대기환경학회지
• /
• 제20권3호
• /
• pp.281-290
• /
• 2004

The main purpose of this study was to characterize the air pollutants emission factors in electric power plant (EPP) using fossil fuels. The electric power plant is a major air pollution source, thus knowing the emission characteristics of electric power plant is very important to develop a control strategy. The major air pollutants of concern from EPP slacks are particulate matter (PM), sulfur oxides (SOx), nitrogen oxides (NOx), carbon monoxide (CO) and heavy metals. Throughout the study, the following results are estimated - PM : 8.671E-05 ∼ 8.724E+01 PM emission (kg) per fuel burned (ton) - SOx : 4.149E-04∼7.877E+01 SOx emission (kg) per fuel burned (ton) - NOx 1.578E-02∼9.857E+00 NOx emission (kg) per fuel burned (ton) - CO : 3.800E-04∼1.291E+00 CO emission (kg) per fuel burned (ton) - Hg : 1.220E+01∼3.108E+02 Hg emission (mg) per fuel burned(ton) From the statistical analysis by Wilcoxon signed ranks test between the emission factors of ours and U.S. EPA's, we can yielded that : p 〉0.05.

• 한국자동차공학회논문집
• /
• 제19권5호
• /
• pp.76-81
• /
• 2011

Exhaust gas recirculation is the well-known and widely used NOx reduction technology for diesel engines. More effective EGR cooler has been developed and applied to diesel engines to meet the reinforced emission regulation. However, the contaminated EGR cooler by diesel exhaust gas reduces the performance of the engine and NOx reduction rate. The buildup of deposits in EGR coolers cause significant degradation in heat transfer performance, often on the order of 20~30%. Deposits also increase pressure drop across coolers and thus may degrade engine efficiency under some operation conditions. In this study, as a solution for this problem, DOC assisted EGR cooler is designed and then investigated to reduce fouling and its impact on cooler performance. A single channel EGR cooler fouling test apparatus and soot particle generator were developed to represent the real EGR cooler and exhaust gas of diesel engine. EGR cooler effectiveness of the case with catalyst of pt 30g/ft3 decreased just up to 5%. This value was 45% less compared to the case without catalyst which decreased up to 9% after 10hours experiments.

• 한국환경과학회지
• /
• 제29권3호
• /
• pp.249-255
• /
• 2020

Particulate matter with an aerodynamic diameter of less than 2.5 μM (PM_2.5) is one of the major environmental pollutants. Di(2-ethylhexyl) phthalate (DEHP), an endocrine disrupting chemical in PM_2.5, has been utilized for the manufacturing of polyvinyl chloride to increase the flexibility of final products. In the present study, we investigated the ecotoxicological effect of DEHP on the viability of skin keratinocytes (HaCaT). DEHP induced apoptotic cell death mediated by phosphorylation of extracellular signal-regulated kinase through the production of intracellular Reactive Oxygen Species (ROS). Interestingly, we found that DEHP induces the phosphorylation of the nuclear factor-kappa B responsible for the expression of cleaved caspase-3 as an executional cell death protease in HaCaT cells. On the basis of these results, we suggest that DEHP in PM_2.5 induces the apoptotic death of human keratinocytes via ROS-mediated signaling events.

• 한국환경과학회지
• /
• 제29권5호
• /
• pp.457-468
• /
• 2020

With continuous industrial development, the types, and amount of particulate matter (PM) have been increasing. Since 2018, environmental standards regarding PM have become more stringent. Pulse air jet bag filters are suitable for PM under the 20 ㎛ and, can function regardless of size, concentration and type. Filtration velocity and shape are important factors in the operation and design of the pulse air jet bag filters however, few established studies support this theory. In this research, numerical simulations were conducted based on experimental values and, several methods were employed for minimizing the pressure drop. In the pilot system, as the inlet duct velocity was faster than 19 m/sec, flow was not distributed equally and, re-entrainment occurred due to the hopper directional vortex. The multi-inlet system decelerated the hopper directional vortex by 25 ~ 30%, thereby decreasing total pressure drop by 6.6 ~ 14.7%. The guide vane system blocked the hopper directional vortex, which resulted optimal vane angle of 53°. The total pressure of the guide vane system increased by 0.5 ~ 3% at 1.5 m/min conditions. However, the filtration pressure drop decreased by 4.8 ~ 12.3% in all conditions, thereby reducing the operating cost of filter bags.