• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 C
• /
• pp.1046-1049
• /
• 1998

PLT(28) ($Pb_{0.72}La_{0.28}Ti_{0.93}O_3$) dielectric thin films have been deposited on Pt/Ti/$SiO_2$/Si substrates in situ by a laser ablation. We have systematically changed the laser fluence from $0.5\;J/cm^2$ to $3\;J/cm^2$, and deposition temperature from $450^{\circ}C$ to $700^{\circ}C$. The surface morphology was changed from planar grain structure to columnar structure as the nucleation energy was increased. The PLT thin film with columnar structure showed good dielectric properties. It is shown that the deposition temperature strongly affect the film nucleation compared with the laser fluence.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부 B
• /
• pp.698-701
• /
• 1998

PLT(28) ($Pb_{0.72}La_{0.28}Ti_{0.93}O_3$) dielectric thin films have been deposited on Pt/Ti/$SiO_2$/Si substrates in situ by a laser ablation. We have systematically changed the laser fluence from $0.5\;J/cm^2$ to $3\;J/cm^2$, and deposition temperature from $450^{\circ}C$ to $700^{\circ}C$. The surface morphology was changed from planar grain structure to columnar structure as the nucleation energy was increased. The PLT thin film with columnar structure showed good dielectric properties. It is shown that the deposition temperature strongly affect the film nucleation compared with the laser fluence.

• 대한전기학회:학술대회논문집
• /
• 대한전기학회 1998년도 추계학술대회 논문집 학회본부A
• /
• pp.378-381
• /
• 1998

PLT(28) ($Pb_{0.72}La_{0.28}Ti_{0.93}O_3$) dielectric thin films have been deposited on Pt/Ti/$SiO_2$/Si substrates in situ by a laser ablation. We have systematically changed the laser fluence from $0.5\;J/cm^2$ to $3\;J/cm^2$, and deposition temperature from $450^{\circ}C$ to $700^{\circ}C$. The surface morphology was changed from planar grain structure to columnar structure as the nucleation energy was increased. The PLT thin film with columnar structure showed good dielectric properties. It is shown that the deposition temperature strongly affect the film nucleation compared with the laser fluence.

• 한국표면공학회지
• /
• 제33권2호
• /
• pp.77-86
• /
• 2000

In this study effects of La starting compounds and substrates on the densification of (P $b_{0.92}$L $a_{0.05}$)Ti $O_3$ thin films were investigated. After the heat treatment on platinized silicon at $650^{\circ}C$ for 30min thickness of PLT(i) thin films (from La-isopropoxide) shrank by 27%, while 33% reduction occurred for PLT (a) thin films (from La-acetate). These PLT(i) films showed less densified surface microstructure compared to the PLT (a) . Lower shrinkage of the films on platinized silicon than on bare silicon (41% and 40% for PLT (i) and PLT (a) respectively) is attributed to the earlier development of crystallinity in the film, which arrests film densification. In order to maximize sintering before crystallization, heat treatment at $400^{\circ}C$ for 3 hours followed by $650^{\circ}C$ for 30 min was attempted. This method increased the shrinkage of the PLT (i) and PLT (a) films two times and 1.5 times as much as that observed for the films heat treated at $650^{\circ}C$ for 30min, respectively. FTIR results indicated that first pyrolysis in the film is associated with the burning of acetate ligands. Condensation reaction between OHs was found to occur preferentially between $350^{\circ}C$ and $450^{\circ}C$, whereas majority of polycondensation between ROH-OH appears to occur until $300^{\circ}C$ and be completed below $450^{\circ}C$.EX>.

• 대한전자공학회:학술대회논문집
• /
• 대한전자공학회 2004년도 하계종합학술대회 논문집(2)
• /
• pp.367-370
• /
• 2004

We fabricated PLT(5) thin film on $Pt/TiO_x/SiO_2/Si$ substrate by using sol-gel method and investigated leakage current, switching and retention properties. The leakage current density of PLT(5) thin film was $3.56{\times}10^{-7}A/cm^2$ at 4V. In the examination of switching properties, pulse voltage and load resistance were $2V{\~}5V$ and $50{\Omega}{\~}3.3k{\Omega}$, respectively. Switching time had a tendency to decrease from 520ns to 140ns with the increase of pulse voltage, and also the time was increased from 140ns to $13.7{\mu}s$ with the increase of load resistance. The activation energy obtained from the relation of applied pulse voltage and switching time was about 143kV/cm. The error of switched charge density between hysteresis loop and experiment of polarization switching was about $10\%$. Also, polarization in retention was decreased as much as about $8\%$ after $10^5$s.

• E2M - 전기 전자와 첨단 소재
• /
• 제11권10호
• /
• pp.53-59
• /
• 1998

Paraelectric lead landthanum titanate(PLT) thin films have been prepared by a reactive dc magnetron sputtering system using a multicomponent metal target. The surface area control of each element on the target markedly facilitates the fabrication of thin films of complex ceramic compounds. A postdeposition heat-treatment was applied to all as-deposited PLT thin films at annealing temperatures up to 75$0^{\circ}C$ for crystalization. The composition of the PLT(28) thin filmannealed at $650^{\circ}C$ was: Pb, 0.73; La, 0.28; Ti, 0.88; O, 2.9. The dielectric constant and dissipation factor of the thin film(200 nm) at low filed measurements (500 Vcm-1) are 1216 and 0.018, respectively. The charge storage density using a typical Sawyer-Tower circuit with a 500 Hz sine wave was 12.5 $\mu$Ccm-2 at the electric field of 200 kVcm-1.

• 센서학회지
• /
• 제5권3호
• /
• pp.87-92
• /
• 1996

Pb과잉인 PLT 타겟을 이용하여 MgO(100) 단결정 기판위에 고주파 마그네트론 스펏터링법으로 PLT박막을 제조하였으며, c-축 배향에 따른 물리적 및 전기적 특성을 조사하였다. PLT박막의 c-축 배향성은 제조조건에 따라 변화하며, 본 연구에서의 제조조건은 기판온도가 $640^{\circ}C$, 분위기압이 10 mTorr, $Ar/O_{2}$비가 10 및 고주파 전력밀도가 $1.7 W/cm^{2}$이었다. 이러한 조건에서 제조된 PLT 박막은 표면에서의 Pb/Ti 비가 1/2, 저항률이 $8{\times}10^{11}{\Omega}{\cdot}cm$ 및 비유전률이 110 이었다. PLT박막을 이용하여 초전형 적외선 센서를 제조하였으며, 제조된 적외선 센서의 피크 대 피크 전압은 450 mV, 신호대 잡음비는 7.2 였다.

• 대한전자공학회논문지SD
• /
• 제39권3호
• /
• pp.1-8
• /
• 2002

Sol-gel 법으로 제작한 (Pb/sub 0.9/La/sub 0.1/)Ti/sub 0.975/O₃(PLT (10)) 박막의 구조적 및 전기적 특성에 대한 과잉 Pb 첨가량이 미치는 영향을 조사하였다. DTA 와 X-선 회절분석 결과, 과잉 Pb 첨가량이 7.5 에서 15㏖%로 증가함에 따라, PLT(10) 박막의 결정화 온도는 감소하였으며, (100) 우선 배향성은 증가하였다. 또한, PLT(10) 박막의 과잉 Pb 첨가량에 따른 전기적 특성을 조사한 결과, 12.5㏖% 의 과잉 Pb 를 첨가한 박막이 가장 우수한 전기적 특성을 나타내었다. 이때, 비유전률과 유전손실은 각각 350 과 0.02 이었고, 100㎸/㎝ 에서 누설전류밀도는 1.27×10/sup -6/A/㎠ 이었다. 또한 이력곡선으로부터 구한 잔류분극(p) 과 항전계 (Ec) 는 각각 6.36μC/㎠ 와 58.7㎸/㎝ 이었으며, ±5V 의 사각펄스를 10/sup 9/회 인가한 후에도 잔류 분극값이 초기값의 약 15% 감소하는 비교적 우수한 피로특성을 나타내었다. 이상의 결과로부터, 과잉 Pb 첨가량이 12.5㏖% 인 PLT(10) 박막은 비휘발성 메모리에 응용될 수 있는 매우 유망한 재료임을 알 수 있었다.

• 전자공학회논문지A
• /
• 제33A권2호
• /
• pp.87-95
• /
• 1996

We have studied the effects of La concentration on the optical and electrical properties of lead lanthanum titanate (PLT) thin films by using sol-gel method. Both the optical and electrical properties are greatly affected by the La concentration. The refreactiv eindices of the films varied from 2.23 to 1.93 with varying La concentration in the range from 15 to 33 mol%. The dielectric constants of the films vary form 340 to 870 with varying La concentration in the range form 15 to 33 mol%. Hysteresis loop becomes slimmer with the increase of La concentration form 15 to 28mol% and little fatter again with the increase of La concentration form 28 to 33 mol%. Among the films investigated in this research, PLT(28) thin film shows the best dielectric properties for the application to the dielectrics of ULSI DRAM's. At the frequency of 100Hz, the dielectric constant and the loss tangent of PLT(28) thin films are 940 and 0.08 respectively. Its leakage current density at 1.5${\times}10^{5}$V/cm is 1${\times}10^{-6}A/cm^{2}$. The comparision between the simulated and the experimental curves for the switching transient characteristics shows that PLT (28) thin films behaves like normal dielectrics.

• 센서학회지
• /
• 제6권5호
• /
• pp.423-429
• /
• 1997

PLT 절연막을 평판표시소자의 재료로 사용하고자 ITO 기판위에 제조하여 그 특성을 조사하였으며 이를 전계 발광소자의 절연층으로 사용하여 그 응용가능성을 조사하였다. PLT 절연막은 기판온도 $500^{\circ}C$, 분위기압 30mTorr에서 증착한 경우 비유전율과 전계파괴강도가 각각 120 및 3.2MV/cm였으며, 성능지수인 $E_{BC}{\cdot}{\epsilon}_r$값이 384로 가장 높았다. 전기저항율은 $2.0{\times}10^{12}{\Omega}{\cdot}cm$ 였다. 또한 증착시 기판온도 및 분위기압에 따른 결정성장을 조사한 결과 기판온도가 $400^{\circ}C$로 낯을 경우에는 비정질 상태였으나 $450^{\circ}C$ 이상의 온도에서는 perovskite와 pyrochlore 구조의 다정질상태의 결정이 성장하였고, 분위기압이 높을수록 결정성장이 더 잘 되었다. 이 PLT 절연막과 ZnS:Mn 형광막을 이용하여 ITO/PLT/ZnS:Mn/PLT/Al 구조의 박막 EL소자를 제작한 결과 문턱전압은 $35.2V_{rms}$였으며, $50V_{rms}$ 1kHz의 구동조건에서 EL의 휘도는 $2400cd/m^{2}$이었으며, 본 실험에서 제조된 박막 EL소자의 최대 발광효율은 0.811m/W였다.