• 제목/요약/키워드: PIV measurements

검색결과 228건 처리시간 0.026초

용융아연 도금공정에서의 SNOUT 내부 유동장 해석 ( I ) (Velocity Field Measurement of Flow Inside SNOUT of Zinc Plating Process ( I ))

  • 신대식;최제호;이상준
    • 대한기계학회논문집B
    • /
    • 제23권10호
    • /
    • pp.1265-1273
    • /
    • 1999
  • PIV(Particle Image Velocimetry) velocity field measurements inside the snout of a1/10 scale model of the Zn plating process were carried out at the strip speed $V_s=1.5m/s$. Aluminum powder particles ($1{\mu}m$) and atomized olive oil ($3{\mu}m$) were used as seeding particles to simulate the molten Zinc flow and deoxidization gas flow, respectively. A pulsed Nd:Yag laser and a $2K{\times}2K$ high-resolution CCD camera were synchronized for the PIV velocity field measurement. From flow visualization study, it is found that the liquid flow in the Zn pot is dominantly governed by the uprising flow caused by the rotating sink roll, with its effect on the steel strip inside the snout largely diminished by installing of the snout. The deoxidization gas flow in front of the strip inside the snout can be characterized by a large-scale vortex rotating clockwise direction formed by the moving strip. In the rear side of the strip, a counter-clockwise vortex is formed and some of the flow entrained by the moving strip impinges on the free surface of molten zinc. The liquid flow in front of the strip is governed by the flow entering the snout, caused by the spinning sink roll. Just below the free surface a counter-clockwise vortex is formed near the snout wall. The moving strip affects dominantly the flow behind the strip inside the snout, and large amount of the liquid flow follows the moving strip toward the sink roll. The thickness of the flow following the strip is very thin in the front side due to the uprising flow, however thick boundary layer is formed in the rear side of the strip. Its thickness is increased as moving downstream toward the sink roll. Inside the snout, the deoxidization gas flow above the free surface is much faster than the liquid flow in the zinc pot. Due to the larger influx of the flow following the moving strip in the rear side of the strip, higher percentage of imperfection can be anticipated on the rear surface of the strip.

익형의 기하학적 조건에 따른 축류팬의 성능에 관한 연구 (Effects of geometric conditions of blade on Performance of Axial Pan)

  • 안은영;김재원;정은주
    • 한국전산유체공학회:학술대회논문집
    • /
    • 한국전산유체공학회 2005년도 춘계 학술대회논문집
    • /
    • pp.25-29
    • /
    • 2005
  • Axial fan is used for the supplement of large amount of flows. Axial blowers show relatively high efficiency of the system. The present model of axial fan is for cooling a condenser in an air-conditioning unit that exhibits tendency toward compact size. In order to realize the compact model, the width of an axial blade should be cut down in axial distance. Main interest lies on the performance of the axial blowing system with blades having shorter chord length. One of the important design parameters for axial fan is the shape of the blades of it. Design of blades includes the cross-sectional shape and its dimension, including the chord length. We consider two types of blades; one is NACA airfoil with normal chord length and the other is with shortening chord length by $10\%$ of normal airfoil. Axial blower with the modified blades is essential for the compact model of an air-conditioner. The other design parameters are same in the two cases. Using a wind tunnel follows ASHRAE standards carries out evaluation of performance of the system. Detail of flows around the blades is prepared by velocity measurements using PIV. According to performance estimation, the axial blower with short chord blade show quite close to the performance results, including flow rate and pressure rise, of the standard one. The reason of the two similar results is that the flowpatterns depend on Reynolds number based on the chord length of a blade. In this investigation, the critical chord length is found, in which the flows near the airfoil are so unstable and the performance of the system is decreased. A series of figures is for the detail information on the flow.

  • PDF

심해 풍파 아래에서의 응집 구조 (Coherent Structures beneath Wind-Generated Deepwater Waves)

  • 오상호;서경덕
    • 한국해안해양공학회지
    • /
    • 제19권1호
    • /
    • pp.16-28
    • /
    • 2007
  • 이 연구에서는 심해 풍파 아래에서의 응집구조(coherent structures)에 대한 실험실 실험 결과를 제시하였다. 풍속과 취송거리가 서로 다른 실험 조건에서 입자화상유속계를 이용하여 취득된 심해 풍파의 속도장으로부터 와도장을 가시화하고 응집구조가 시 공간적으로 변천하는 양상 및 그에 따른 와도의 연직 분포 변화를 정성적으로 분석하였다. 파봉 아래에서는 파와 같은 위상으로 함께 진행하는 응집구조가 존재함을 확인하였다. 이 응집구조의 회전 방향은 바람이 10 m/s 이하인 실험 조건에서는 파 내부의 입자 궤도 운동과 반대 방향인 반면, 바람의 세기가 약 13 m/s이고 파봉 근처에서 쇄파가 발생하는 경우에는 같은 방향이었다. 수면 근처에서는 응집구조의 진행에 따른 복잡한 소용돌이 상호 작용이 나타나는 반면, 수면으로부터 깊은 수심에서는 파 궤도 운동의 영향이 미미하여 응집구조의 시 공간적 변화가 거의 없었다.

저층 경계면 연구용 Benthic chamber(BelcI) 개발 (The Development of a Benthic Chamber (BelcI) for Benthic Boundary Layer Studies)

  • 이재성;박경수;강범주;김영태;배재현;김성수;박정준;최옥인
    • 한국해양학회지:바다
    • /
    • 제15권1호
    • /
    • pp.41-50
    • /
    • 2010
  • 소형선박에서 운영이 가능한 연안용 benthic chamber(BelcI)를 개발했다. 운영상에 유연성이 큰 BelcI는 연안 저층 경계면 연구에 폭넓게 이용될 수 있을 것으로 판단된다. BelcI는 몸체, 자동채수기, 교반기 및 전자제어부로 구성된다. 운영상에 유연성을 극대화하기 위해 몸체는 사각 셀 단위의 2단 구조로 설계했다. 센서신호의 증폭, 교반기 및 채수장치 제어회로를 초 전력 소모 회로로 구성하여 외부 전원장치를 제거했다. PIV(particle image velocimetry)기법으로 측정한 chamber 내부의 유체유통은 전형적인 radial-flow impeller의 특성을 나타냈다. chamber내 물의 혼합 시간은 약 30초로 추정되었으며, 바닥면에서 shear velocity($u^*$)는 약 $0.32\;cm\;s^{-1}$였다. 산경계층(DBL) 두께는 약 $180{\sim}230\;{\mu}m$였다. 현장에서 측정한 산소소모율은 약 $84\;mmol\;O_2\;m^{-2}\;d_{-1}$로 선상배양결과 보다 2배 이상 컸다. 저층 영양염 플럭스는 "질산+아질산"이 $0.18\;{\pm}\;0.07\;mmol\;m^{-2}\;d^{-1}$, 암모니움이 $2.3\;{\pm}\;0.5\;mmol\;m^{-2}\;d^{-1}$, 인산인이 $0.09\;{\pm}\;0.02\;mmol\;m^{-2}\;d^{-1}$, 규산규소가 $23\;{\pm}\;1\;mmol\;m^{-2}\;d^{-1}$로 추정되 었다.

소아 심장이식 후 림프증식성 질환의 진단을 위한 Epstein-Barr Virus 정량 검사의 유용성 (Clinical Utility of Epstein-Barr Viral Load Assay to Diagnose Posttransplant Lymphoproliferative Disorders in Pediatric Heart Transplant Recipients)

  • 김준일;이진아;김영휘
    • Pediatric Infection and Vaccine
    • /
    • 제24권1호
    • /
    • pp.44-53
    • /
    • 2017
  • 목적: 소아 심장이식 환자에서 림프증식성 질환(posttransplant lymphoproliferative disorder [PTLD]) 발생과 Epstein-Barr virus (EBV) 정량값의 상관관계를 분석하고, PTLD의 발생에 영향을 주는 인자들에 대해서 알아보고자 하였다. 방법: 2006년 1월부터 2015년 3월까지 최근 9년간 서울아산병원 어린이병원에서 심장이식을 받은 18세 미만 환자 중 이식 후 최소 1개월 이상 추적 관찰이 가능한 경우를 대상으로 후향적으로 의무기록을 분석하였다. 결과: 총 40명의 심장이식 환자의 진단 시 나이의 중앙값은 11.5세(범위, 0.3-17.8세)였으며 이 중 3명에서 이식 후 4.3개월, 6.3개월 및 17개월째 PTLD가 발생하였다. 이식 후 혈중 EBV 정량 검사를 시행한 28명 중 최소 1회 이상 EBV 바이러스혈증이 관찰된 경우는 7명이었으며, PTLD로 진단받은 환자 3명이 모두 ${\geq}10,000copies/mL$의 EBV 바이러스혈증이 선행되어 있었다. PTLD 발생군은 PTLD 비발생군에 비해 어린 나이에 이식을 받았으며(P=0.021), 초기 및 최고 혈중 EBV 역가가 더 높은 경향을 보였으나 통계적인 차이는 없었다. 결론: 소아 심장이식 환자에서 이식 당시 어린 연령 및 이식 후 EBV 바이러스혈증 동반 여부가 PTLD 발생과 관련이 있었다. 추후 전향적인 연구를 통해서 소아 심장이식 환자에서 PTLD 발생을 적절히 예측할 수 있는 EBV 정량값의 지표를 구하는 것이 필요하겠다.

인공리프 개구폭 변화에 따른 흐름특성 고찰 (Hydraulic Characteristics Investigation due to the Change of GapWidth between Artificial Reefs)

  • 김규한;심규태
    • 한국해안·해양공학회논문집
    • /
    • 제28권6호
    • /
    • pp.408-415
    • /
    • 2016
  • 비교적 수심이 낮은 해안에 설치되는 소형어항 및 해안구조물 등은 연안흐름을 방해하여 표사이동의 평형상태를 붕괴시킬 수 있으며 구조물에 의한 회절파의 영향으로 파랑이 집중되어 국소적인 해안침식을 유발시킬 가능성이 크다. 이와 같은 해안침식을 제어하기 위한 대책으로는 다양한 저감공법이 제안되어 이용되고 있으나 이안제, 돌제 및 헤드랜드 등의 공법은 침식제어에 대한 직접적인 효과는 우수할 수도 있으나 해수면위로 구조물이 드러나기 때문에 경관이 우수한 해수욕장에서는 경관을 해치게 되어 적용하기 어려운 측면이 있다. 해안관광을 우선시하는 지역에서는 바다조망권을 훼손시키지 않고 2차적인 환경영향을 최소화 시키고자 하는 목적으로 광폭의 잠제인 인공리프를 채택하는 사례가 증가하고 있다. 한편 인공리프를 설치하고자 할 경우에는 인공리프의 길이와 인공리프 사이의 개구폭 및 해안선으로부터의 이안거리를 어떻게 결정하는지가 중요하다. 그러나 이러한 인공리프의 중요설계요소들에 대한 명확한 설계기준은 확립되어 있지 않다. 본 연구에서는 다양한 종류의 수리모형실험을 수행하고 인공리프 주변에서 발생되는 파랑 및 흐름장의 변화를 PIV기법 등을 이용한 정밀측정 및 해석을 수행하여 인공리프 길이와 이안거리 및 개구폭에 대한 기준을 제시하고자 하였다.

유동가시화를 이용한 혼-타의 간극유동 차단장치 효과에 관한 실험적 검증 (Experimental Verification on the Effect of the Gap Flow Blocking Devices Attached on the Semi-Spade Rudder using Flow Visualization Technique)

  • 신광호;서정천;김효철;유극상;오정근
    • 대한조선학회논문집
    • /
    • 제50권5호
    • /
    • pp.324-333
    • /
    • 2013
  • Recently, rudder erosion due to cavitation has been frequently reported on a semi-spade rudder of a high-speed large ship. This problem raises economic and safety issues when operating ships. The semi-spade rudders have a gap between the horn/pintle and the movable wing part. Due to this gap, a discontinuous surface, cavitation phenomenon arises and results in unresolved problems such as rudder erosion. In this study, we made a rudder model for 2-D experiments using the NACA0020 and also manufactured gap flow blocking devices to insert to the gap of the model. In order to study the gap flow characteristics at various rudder deflection angles($5^{\circ}$, $10^{\circ}$, $35^{\circ}$) and the effect of the gap flow blocking devices, we carried out the velocity measurements using PIV(Particle Image Velocimetry) techniques and cavitation observation using high speed camera in Seoul National University cavitation tunnel. To observe the gap cavitation on a semi-spade rudder, we slowly lowered the inside pressure of the cavitation tunnel until cavitation occurred near the gap and then captured it using high-speed camera with the frame rate of 4300 fps(frame per second). During this procedure, cavitation numbers and the generated location were recorded, and these experimental data were compared with CFD results calculated by commercial code, Fluent. When we use gap flow blocking device to block the gap, it showed a different flow character compared with previous observation without the device. With the device blocking the gap, the flow velocity increases on the suction side, while it decreases on the pressure side. Therefore, we can conclude that the gap flow blocking device results in a high lift-force effect. And we can also observe that the cavitation inception is delayed.

상관영역 크기 변화에 따른 영상유속계의 오차 분석 (Error Analysis of Image Velocimetry According to the Variation of the Interrogation Area)

  • 김서준;류권규;윤병만
    • 한국수자원학회논문집
    • /
    • 제46권8호
    • /
    • pp.821-831
    • /
    • 2013
  • 최근 수리 실험 및 계측 분야에 영상유속계가 많이 이용되고 있다. 그러나 영상유속계의 영상 분석에 대한 표준적인 방법과 측정 불확도가 정립되어 있지 않아 일반 사용자들이 사용하기 어려운 것이 사실이다. 특히 영상유속계를 이용한 유속 산정 시 상관영역 크기 결정에 대한 기준이 없기 때문에 사용자마다 유속 산정 결과가 차이가 나는 문제가 있다. 이에 본 연구에서는 영상유속계의 상관영역 크기 변화에 따른 오차분석을 통해 상관영역 크기 결정을 위한 자료를 제시하고 자한다. 오차분석을 위해 12개의 인공영상군을 제작하였으며, 다양한 입자수와 입자크기의 영상을 획득한 후 상관영역의 크기를 변화시키면서 산정한 유속을 인공영상의 유속 참값과 비교하여 오차분석을 수행하였다. 오차 분석결과 상관영역의 크기 변화에 따라 영상유속계로 산정한 유속값에 대한 오차가 달라짐을 확인하였고, 상관영역의 크기를 크게 결정할수록 오차가 줄어드는 것으로 나타났고, 동일한 상관영역의 크기로 유속을 산정할 경우 입자 크기가 증가할수록 또는 입자수가 증가할수록 오차가 작게 나타났다. 특히 영상유속계의 오차는 입자의 크기 보다는 입자수의 변화에 좀 더 영향을 많이 받는 것으로 나타났다. 또한 상관영역의 크기가 커짐에 따라 최대 오차와 최소 오차간의 간격이 줄어드는 것을 확인하였으며, 영상 전체에서 산정한 유속의 평균 오차가 5% 이하를 만족시키는 상관영역 크기를 기준으로 그 이하의 상관영역에 대해서는 최대 오차와 최소 오차간의 차이가 크게 나타나 영상유속계의 측정 불확실성이 큰 것으로 나타났다. 영상유속계의 신뢰수준별 입자밀도 변화에 따른 최소 상관영역의 크기를 분석한 결과 전반적으로 입자밀도가 커짐에 따라 상관영역의 크기는 작아지는 것으로 나타났지만 입자밀도가 작더라도 입자수가 큰 경우에는 신뢰수준을 만족시키는 최소 상관영역의 크기가 감소하는 것으로 나타났다.