• Journal of the Korean Crystal Growth and Crystal Technology
• /
• v.30 no.2
• /
• pp.41-46
• /
• 2020

The characteristics of the residual stress on the types of the substrate was investigated with adjusting the V/III ratio during GaN growth via the HVPE method. GaN single crystal layers were grown on a sapphire substrate and a GaN template under the conditions of V/III ratio 5, 10, and 15, respectively. During GaN growth, multiple hexagonal pits in GaN single crystal were differently revealed in accordance with growth condition and substrate type, and their distribution and depth were measured via optical microscopy(OM) and white light interferometry(WLI). As a result, it was confirmed that the distribution area and depth of hexagonal pit tended to increase as the V/III ratio increased. Moreover, it was found that the residual stress in GaN single crystal decreased as the distribution area and depth of the pit increased through measuring micro Raman spectrophotometer. In the case of GaN growth according to substrate type, the GaN on GaN template showed lower residual stress than the GaN grown on sapphire substrate.

• Journal of the Korea Academia-Industrial cooperation Society
• /
• v.18 no.1
• /
• pp.310-315
• /
• 2017

Although studies evaluating the effects of the blasting vibration on the adjacent structures from various angles have continued, cases of securing the safety of the adjacent buildings and researching the proper blasting method for the field condition by analyzing the vibration waveform of the measuring field while performing the open pit blasting are poor. Therefore, it is necessary to present a remedy for blasting pattern selection through test blasting that is appropriate for field conditions, and is economical and efficient. In this study, open pit blasting work was conducted based on the separation distance applied according to the standard blasting method by test blasting and the vibration regulation standard in the road expansion construction site to measure the blasting vibration value, and the vibration prediction equation by blasting methods was examined using a regression analysis computer program to calculate K, N, and R of the confidence level 95%. By setting the blasting allowed vibration standard of the test blasting target area to 0.3cm/sec, and the charring weight and blasting method by the separation distances according to the blasting vibration estimation equation of the open pit blasting guideline and the blasting vibration estimation equation of the test blasting were compared/analyzed, it was possible to identify the factors that increased the working expenses. In addition, the measurement and analysis of the adjacent structures during open pit blasting and the blasting vibration were performed after selecting the most adjacent structure to the open pit blasting spot to analyze the problems on the test blasting procedure and analysis method in the open pit blasting design/construction guidelines, which appeared in the process of completing open pit blasting construction, and a remedy is presented.

• Tunnel and Underground Space
• /
• v.23 no.5
• /
• pp.353-361
• /
• 2013

Previous studies for analyzing optimal haulage routes of dump trucks in open pit mines mostly used raster data. However, the raster data has several problems in performing optimal route analyses: (1) the jagged appearance of haulage roads according the cell resolution often causes overestimation of the travel cost; (2) it difficult to trace the topological relationships among haulage roads. These problems can be eliminated by using vector network data, however a new method is required to reflect the performance characteristics of a dump truck according to terrain gradient changes. This study presents a new method to create vector network data with the consideration of terrain gradient for analyzing optimal haulage routes of dump trucks in open pit mines. It consists of four procedures: (a) creating digital elevation models, (b) digitizing haulage road networks, (c) calculating the terrain gradient of haulage roads, and (d) calculating the average speed and travel time of a dump truck along haulage roads. A simple case study at the Roto South pit in the Pasir open pit coal mine, Indonesia is also presented to provide proof that the proposed method is easily compatible to ArcGIS Network Analyst software and is effective in finding optimal haulage routes of dump trucks with considering terrain gradient in open pit mines.

• Journal of Korean Dental Hygiene Science
• /
• v.6 no.2
• /
• pp.101-114
• /
• 2023

Background: This study aimed to explore the overall perception of pit and fissure sealants and suggest methods to revitalize their current stagnation. Methods: To determine the social perception of the change in coverage policy for pit and fissure sealants, we categorized them into five time periods. The first period (December 1, 2009 to November 30, 2010), the second period (December 1, 2010 to September 30, 2012), the third period (October 1, 2012 to May 5, 2013), the fourth period (May 6, 2013 to September 30, 2017), and the fifth period (October 1, 2017 to December 31, 2022). We utilized text mining, an unstructured big data analysis method. Keywords were collected and analyzed using Textom, and the frequency analysis of the top 30 keywords, structural features of the semantic network, centrality analysis, QAP correlation analysis, and co-occurrence analysis were conducted. Results: The frequency analysis showed that the top keywords for each time period were 'Cavities', 'Treatment', and 'Children'. In the structural features of the semantic network of pit and fissure sealants by time period, the density index was found to be around 1.00 for all time periods. The QAP correlation analysis showed the highest correlation between the first and second periods and the fourth and fifth periods with a correlation coefficient of 0.834. The co-occurrence analysis showed that 'cavities' and 'prevention were the top two words across all time periods. Conclusion: This study showed that pit and fissure sealants are well accepted by the society as a preventive treatment for caries. However, the awareness of health education related to these sealants was found to be low. Efforts to revitalize stagnant pit and fissure sealants need to be strengthened with effective education.

• Journal of Dental Anesthesia and Pain Medicine
• /
• v.24 no.1
• /
• pp.47-56
• /
• 2024

Background: Among the various pain-related diseases that can be encountered at the clinic, there is a neuropathic pain that is difficult to treat. Numerous methods have been proposed to treat neuropathic pain, such as taking medication, nerve block with lidocaine, or neurolysis with alcohol or phenol. Recently, a method of perineural injection using dextrose instead of lidocaine was proposed. This study was designed to compare the effects of perineural injection therapy (PIT) with buffered 5% dextrose or 0.5% lidocaine on neuropathic pain. Methods: The data were collected from the database of pain clinic from August 1st, 2019 to December 31st, 2022 without any personal information. The inclusion criteria were patients diagnosed with postherpetic neuralgia (PHN), trigeminal neuralgia (TN), complex regional pain syndrome (CRPS), or peripheral neuropathy (PN), and patients who had undergone PIT with buffered 5% dextrose (Dextrose group) or 0.5% lidocaine (Lidocaine group) for pain control. The data of patients, namely sex, age, and pain score (numerical rating scale, NRS) were collected before PIT. The data of NRS, side effects, and satisfaction grade (excellent, good, fair, or poor) were collected one week after each of the four PIT, and two weeks after the last PIT. Results: Overall, 112 subjects were enrolled. The Dextrose group included 89 and Lidocaine group included 23 patients. Because the number of patients in the Lidocaine group was too small to allow statistical analysis, the trend in Lidocaine group was just observed in each disease. There were no significant side effects except for a few bruise cases on the site of injection in all groups. The NRS in most Dextrose groups except CRPS were reduced significantly; however, the Lidocaine group showed a trend of pain reduction only in PHN. The Dextrose group except CRPS showed increased satisfaction two weeks after the final PIT. Conclusion: From the results, it is suggested that PIT with buffered 5% dextrose may have a good effect for neuropathic pain without any side effect except for patients with CRPS. This may offer a window into a new tool that practitioners can employ in their quest to help patients with neuropathic pain.

• Physical Therapy Korea
• /
• v.18 no.3
• /
• pp.85-93
• /
• 2011

The purpose of this study was to establish the reliability and validity of the passive lumbar extension (PLE) test and prone instability test (PIT). Thirty-three subjects (14 males, 19 females) with lower back pain enrolled in the study and the subjects were divided into 2 groups (positive and negative instability groups) on the basis of radiographies of flexion and extension. Reliability was determined by the kappa coefficient and validity was examined using calculated sensitivity, specificity, and the likelihood ratio. The results showed that the reliability of the PLE test was higher than the PIT (intra-rater reliability: k=.86 and k=.81, interrater reliability: k=.65 and k=.62) and the validity of the PLE test was also higher than the PIT (sensitivity: 91% and 62%, specificity: 95% and 85% positive likelihood ratio: 20.00 and 4.10, negative likelihood ratio: .10 and .45). In conclusion, we think that the PLE test was a more reliable and valid method for lumbar instability than the PIT.

• International Commerce and Information Review
• /
• v.12 no.1
• /
• pp.179-202
• /
• 2010

Broadcasting services sector has been facing strong public pressure to shift gears from regulation to deregulation since mid-1990s, where a triggering role was played particularly by rapid development of IT technology and content digitization. Major agenda was how to reduce regulatory divides between more liberal telecommunication sector and less liberal broadcasting. After all, common solution package worldwide was for the latter to switch over from network-dependent(vertical) to network-independent(horizontal) regulation, and to facilitate more open and competitive transmission with content market kept protected. This is no other than decoupling content provision from broadcasting and promoting market access towards the latter. Policy experiences of US and UK show that there exists a complementary relationship between quantitative and qualitative restrictions in implementing such deregulation. While mitigating quantitative ownership regulations in broadcasting, they also sought to systematize, so-called, PIT(public interest test) as a qualitative safety device to cope with the risk of losing fundamental public values accordingly in broadcasting. Recent domestic progress in broadcasting legislation in 2009, however, seems to overlook the growing importance of PIT in the process of deregulation. Bearing this motivation in mind and taking account of the relevant WTO disciplines, this paper is to address policy issues and suggestions for PIT in Korea's broadcasting services sector.

• Speech Sciences
• /
• v.13 no.1
• /
• pp.95-105
• /
• 2006

The primary goal of therapeutic intervention in dysarthric speakers is to increase the speech intelligibility. Decision of critical features to increase the intelligibility is very important in speech therapy. The purpose of this study is to know the effects of pitch increasing training (PIT) on speech of a subject with Parkinson's disease (PD). The PIT program is focused on increasing pitch while a vowel is sustained with the same loudness. The loudness level is somewhat higher than that of the habitual loudness. A 67-year-old female with PD participated in the study. Speech therapy was conducted for 4 sessions (200 minutes) for one week. Before and after the treatment, acoustic, perceptual and speech naturalness evaluation was peformed for data analysis. Speech and voice satisfaction index (SVSI) was obtained after the treatment. Results showed Improvements in voice quality and speech naturalness. In addition, the patient's satisfaction ratings (SVSI) indicated a positive relationship between improved speech production and their (the patient and care-givers) satisfaction.

• 한국초전도학회:학술대회논문집
• /
• v.10
• /
• pp.276-279
• /
• 2000

When high temperature superconducting tapes is fabricated using the PIT (Powder In Tube) method, the length of HTS tapes is increased more than 500 ${\sim}$ 1,000 times of initial powder packed billet. On mechanical processing, heterogeneous properties between the ceramic superconducting core and Ag/Ag alloy sheath occur the non-uniformity deformation as like sausaging that deteriorate the critical current properties of HTS tapes. In this study, we investigated the workability of Bi-2223/Ag/Ag alloy sheath tapes fabricated by the PIT method involving a number of different mechanical processes, multi drawing and rolling. In order to obtain the high critical current density and high uniformity of Bi-2223/Ag sheath tapes, the influences of powder packing density, drawing die angle and rolling parameters were studied. We found that the roll diameter is an important variable in the rolling process, as critical current of tapes rolled using 250 mm rolls was higher than that using 150 mm rolls.

• Proceedings of the Korean Institute of Electrical and Electronic Material Engineers Conference
• /
• 2003.07a
• /
• pp.597-600
• /
• 2003

Bi-2223/Ag HTS wires have been fabricated by the PIT(powder in tube)process. Intermediate annealing was carried out to increase the homogenization and uniformity of the superconducting filaments embedded in the silver matrix during the deformation process that is important to sustain the engineering critical current density in long superconducting wire. Intermediate annealing act to release the deformation hardening of the superconducting wires during drawing process. Rolling parameters were investigated to roll the superconducting tapes with uniform thickness, width and winding tensions. Critical current of 60 m long superconducting tapes was measured 54.3 A continuously after final sintering heat treatment. The phase analysis of Bi-2223/Ag superconducting tapes are examined by the XRD.