• Journal of the Korean Wood Science and Technology
• /
• v.38 no.2
• /
• pp.108-116
• /
• 2010

This paper explains the effects of wood drying on treatability (as determined by water uptake) of Japanese red pine (Pinus densiflora S. et Z.) at the sevenmoisture content (MC) levels above and below the fiber saturation point (FSP). According to the experimental results, it was found that water uptake (as the percentage of void volume filledwith distilled water, VVF%) was influenced by level of moisture content and percentage of void volume filled was improved effectively by kiln drying process. A significant relationship between moisture content and treatability was established. Permeability and liquid uptake were decreased above the FSP due to the effect of the less void space available in wood. Even though increased liquid uptake was observed at lower moisture content, no significant differences was observed moisture content below 20%. Therefore, this species need to be initially dried below FSP before treated with liquids. But drying moisture content below 10% might not be economical for the commercial purpose comparing drying the wood between 10 and 20% moisture content. The result of this study inferred that the treatability of pine wood can be improved by reducing the moisture content up to a certain level of 10~20% for allowing better performance.

• The Korean Journal of Ecology
• /
• v.28 no.5
• /
• pp.321-326
• /
• 2005

We investigated the effects of pollutants on two pine species (Pinus koraiensis and Pinus rigida) in an industrial region, using a physiological approach. We measured the growth and physiological parameters (photosynthetic activity and chemical contents) of the pine trees in relation to environmental pollutants. The concentrations of manganese (Mn), fluorine (F) and chlorine (CI) in needles of two pine species at the damaged site were significantly higher than those at the control site, and concentrations of essential elements (P) and chlorophyll in needles at the damaged site were significantly lower than at the control site. The light-saturated net photosynthesis $(P_{sat})$, apparent quantum yield $(\Phi)$, carboxylation efficiency (CE) of both pines at the damaged site were significantly lower than those at the control site. The length of shoots and survivorship of needles of two pines at the damaged site were significantly lower than those at the control site. Especially, at damaged site, growth of shoots and needle longevity of P. koraiensis are larger than those of P. rigida.

• Journal of Korea Foresty Energy
• /
• v.25 no.2
• /
• pp.49-54
• /
• 2006

This study was carried out to provide basic data for using domestic structural softwood lumber efficiently and ensuring structural safety of timber structures. The ratios (k-factor) between static and dynamic MOE measured by ultrasonic device for $2{\times}6$ domestic softwood structural lumber are 1.0602 for Korean red pine, 1.0013 for Korean white pine and 1.2320 for Japanese larch. In machine grade using nondestructive method, 76% of Korean red pine was classified into higher than E9 grade, 85% of Korean white pine was sorted into higher than E7 grade and 68% of Japanese larch was classified into higher than E11 grade. Correlation between MOE and MOR by static bending with k-factor from nondestructive method provide a possibility to predict bending strength and allowable stress of domestic softwood structural lumber.

• Journal of Korean Society of Forest Science
• /
• v.80 no.4
• /
• pp.427-435
• /
• 1991

Linear programming(LP) is a well-known method in optimizing timber harvest schedules. This paper describes a linear programming formulation of korean pine stands for timber harvest scheduling problems. Simulation technique and LP were applied to optimize the time and space distribution of the sustained yield for the 10-year forest management planning horizon. Growthfunction of korean pine stands in study area was derived with the yield table. This growthfunction was contained to the simulation model in estimating of changing stand volume conditions for the planning horizon. These estimated values were served as the basic data of LP model, and LP model was formulated with the maximum of periodical harvest volume calculated by the classical yield regulation method (Paulsen-Hundeshagen formula) and the maximum of periodical harvest area calculated for the normal age distribution. The timber harvest schedule was established periodically for each subcompartment of korean pine stands in experiment forest of College of Forestry in Kangweon National University with the here developed LP model.

• Journal of the Korea Furniture Society
• /
• v.24 no.4
• /
• pp.408-415
• /
• 2013

In order to evaluate a feasibility of industrial art use of veneer such as cylindrical laminated veneer lumber, the veneers of 4 species of Korean pine, radiata pine, yellow poplar and Japanese cypress were natural dye-colored and clear finished. Natural dyes were red color originated from sappanwood, blue color from polygonum indigo, and yellow color from Amur cork tree and gardenia. the clear coats of crack seal clear and UV protection oil were applied on the dyed veneer. The dyeing and finishing characteristics through fading test were summarized as follows; In non-dyed and non-finished Korean pine veneer, lightness was decreased and yellow and red hues increased after fading test. In natural dyed- and finished-veneer, color difference of gardenia-mixed Amur cork tree was generally highest, and that of polygonum indigo was lowest. Compared to non-treatment of veneers of Korean pine and yellow poplar, color difference decreasing effect by finishing was shown in crack seal clear and UV protection oil. In addition, UV protection oil was more favorable than crack seal clear with more decreased color difference. In result, maximum values of color difference after fading for 8 days were recorded about 16 to 20, which are remarked 'very much' of 12.1 or more when reviewing with 'National bureau of standards unit in USA'.

• Journal of the Korean Society of Environmental Restoration Technology
• /
• v.23 no.4
• /
• pp.59-67
• /
• 2020

In this study, the effects of windbreak fences composed of natural vegetation on one-year-old seedlings were analyzed to develop restoration methods for an endangered subalpine species, the dwarf Siberian pine (Pinus pumila (Pall.) Regel). One-year-old seedlings were planted in 2016 by sowing seeds that had been collected from the Daecheongbong area on Mt. Seoraksan, South Korea, in 2014. The area near Daecheongbong was selected as the experimental site, and treatment and control plots (2m×2m) were installed at the site. To analyze the effects of wind protection, windbreak fences were constructed in the treatment plots using hairy Korean rhododendrons (Rhododendron mucronulatum Turcz. var. ciliatum Nakai) from the surrounding area and weather stations were installed to investigate atmospheric temperature, humidity, and wind speed. In all control plots without windbreak fences, dwarf Siberian pine seedlings were killed by strong winds seven months after planting. In contrast, the average survival rate of the seedlings in treatment plots was 96.7% after seven months, 64.2% after two years, and 45% after three years, with most (85.3%) of the seedlings showing good initial root establishment. Accordingly, windbreak fences composed of natural vegetation are suitable for promoting the early establishment of seedlings in the restoration of dwarf Siberian pine stands.

• Journal of the Korean Wood Science and Technology
• /
• v.50 no.1
• /
• pp.1-11
• /
• 2022

To evaluate the bearing strength of red pine cross-laminated timber (CLT) with self-tapping screw (STS), which is widely used as a fastener for connection in CLT building, the bearing test was conducted. Accoring to the STS's diameters (8, 10, 12 mm), the bearing test specimens with half hole were manufactured. Bearing strength was compared and reviewed in consideration of the configuration in STS and the loading direction to the grain of red pine. As a result of the bearing test on the STS's diameter, the yield bearing load increases as the larger diameter of the STS in all directions of the red pine. The bearing strength of the thread part (thread + tip) was higher than the shank part (shank + shank cutter). In compared with the directions to the grain of red pine, the bearing strength of the cross section parallel to the loading direction was the highest, and the tangent section was the lowest bearing strength. The average bearing strength of the loading direction in parallel to the grain was 23.43 MPa, which was about 45% higher than the average 16.16 MPa in perpendicular to the grain. The predicted bearing strength calculated by Eurocode (EN) and Korean Building Code (KBC)'s equation was lower than the experimental value. It is nessesary to propose the new equations of bearing strength reflected the configuration information of STS.

• Journal of Forest and Environmental Science
• /
• v.35 no.4
• /
• pp.248-257
• /
• 2019

We chose the Mt. Dalum area (located in Gijang-gun, Busan, Korea) for our survey, particularly The pine wilt disease zone and the non-permanent control area. This study investigates the effect of pine wilt disease on the distribution of beetle species in the process of ecosystem change due to insect control; pine forests treated for pine wilt disease were divided into insect control and non-control sites, respectively. The results of this study are as follows. Twen tyseven species belongs to 12 families were identified from 969 ground beetles collected from this sites. Species richness was the highest in Coleoptera (6 species, 469 individuals). In the control site, 21 species belongs to 10 families were identified from 228 individuals, while 24 species of 11 families from 533 individuals in the non-control area. The highest number of species were noted in June and July from the non- control and control sites, respectively. The highest number of insects in control and non-control sites was observed in July, while the lowest in September. Sipalinus gigas gigas, Spondylis buprestoides, Plesiophthalmus davidis, Calosoma maximowiczi, Damaster jankowskii jankowskii, and Damaster smaragdinus were captured in both study sites. Episomustur ntus and Glischrochilus ipsoides were only captured in the control site, while Macrodorcas rectus rectus and Pheropsophus javanus were only captured in the non-control site. Six beetles and five species (such as Calosoma maximowiczi) were found in the control site and six species (including Damaster smaragdinus) in the non-control site. The species distributions by altitude were 163, 518, and 258 individuals, at 100, 200 and 300 m sites, respectively. The diversity, evenness, and dominance indices in the control area were 0.764, 0.812, and 0.367, respectively. The diversity, evenness, and dominance indices in the non-control area were 0.927, 0.837, and 0.352, respectively. The similarity index between the control and non-control area was 80%.

• Research in Plant Disease
• /
• v.16 no.3
• /
• pp.299-305
• /
• 2010

Objective of this study is to examine whether pine wood nematode (PWN: Bursaphelenchus xylophilus) in the sawdust discharged from infected trees cause pine wood disease or not. For this, survival time of PWN in soil was examined in which soil moisture was controlled as 15%, 22.5%, and 30% in volume ratio, respectively. The pathogenicity tests were conducted under greenhouse and field conditions. Survival time of PWN in soil was about three days in the saturated (about soil moisture of 23% in volume ratio) and dark condition between 25 and $28^{\circ}C$ of room temperature. None of potted seedlings with non-wounded roots was infected by PWN in sawdust. In field, pine wood disease was not occur in any pine trees. These results indicated that PWN discharged on soil when the infected trees were cut by chain saw can not cause pine wood disease.

• Journal of the Korean Wood Science and Technology
• /
• v.43 no.3
• /
• pp.311-319
• /
• 2015

Near infrared (NIR) reflectance spectroscopy was employed to develop moisture content prediction model of pitch pine (Pinus rigida), red pine (Pinus densiflora), Korean pine (Pinus koraiensis), yellow poplar (Liriodendron tulipifera) wood below fiber saturation point. NIR reflectance spectra of specimens ranging from 1000 nm to 2400 nm were acquired after humidifying specimens to reach several equilibrium moisture contents. To determine the optimal moisture contents prediction model, 5 mathematical preprocessing methods (moving average (smoothing point: 3), baseline, standard normal variate (SNV), mean normalization, Savitzky-Golay $2^{nd}$ derivatives (polynomial order: 3, smoothing point: 11)) were applied to reflectance spectra of each specimen as 8 combinations. After finishing mathematical preprocessings, partial least squares (PLS) regression analysis was performed to each modified spectra. Consequently, the mathematical preprocessing methods deriving optimal moisture content prediction were 1) moving average/SNV for pitch pine and red pine, 2) moving average/SNV/Savitzky-golay $2^{nd}$ derivatives for Korean pine and yellow poplar. Every model contained three principal components.