• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.12 no.7
• /
• pp.1167-1174
• /
• 2001

Antenna PIM(Passive Intermodulation) level measurement results are rarely credited due to the external signal receiving characteristics of antenna, and seriously affected by the external PIM sources such as anechoic chamber absorber and antenna tower. In this paper, antenna PIM model for the Reflect PIM measurement method is presented. Through the null point phenomena of the PIM level obtained by antenna PIM model simulations and experimental results, we concluded that antenna PIM level measurements are greatly affected by the PIM level generated on the anechoic chamber absorber and the path differences of PIM signal reflected to the antenna.

• ETRI Journal
• /
• v.24 no.6
• /
• pp.435-442
• /
• 2002

Antenna Passive Intermodulation (PIM) level measurement results are rarely credited to be due to external signal receiving characteristics of the antennas or serious effects from external PIM sources, such as the anechoic chamber absorber and antenna tower. This paper presents an antenna PIM model for a reflected PIM measurement method. Based on the findings of null point generation and the behavior of the third order PIM values obtained by theoretical predictions and experimental results, we concluded that the results of the antenna PIM level test were influenced by the external PIM sources generated by the anechoic chamber absorber and the path differences of PIM signals coming into the antenna.

• The Journal of Korean Institute of Electromagnetic Engineering and Science
• /
• v.14 no.7
• /
• pp.692-698
• /
• 2003

This paper presents IM model which is produced in 3 port RF passive component. We calculated forward and reflect PIM of 3 port component by using the model. And they are reasonable agreement with measurement result like below. In the case of forward IM, calculated result is -122 dBc(at 43 dBm), which differ 2.5 dB with measurement result. And reflected IM, the average calculated result is -130 dBc(at 43 dBm), which differ 3 dB with measurement result. The results which are calculated and measured under various condition(IM source level, frequency sweep, contour length, etc.) show that forward method gets more fixed result than that of reflect. Consequently, PIM of 3 port component is predicted and analyzed for desensitizing by the proposed model.

• Journal of Powder Materials
• /
• v.9 no.4
• /
• pp.251-260
• /
• 2002

In the viscosity measurement of PIM feedstock, slip correction methods require a number of experiments and produce a high level of error. In this study, a rotational rheometer with a parallel-discs configuration having different surface roughness was tried to minimize the effect of the slip phenomenon. Disc surface was prepared in 3 different roughness conditions - a smooth and 2 roughened surfaces. Results with the roughened surfaces were compared with the results obtained with a slip correction method. Relationship between powder characteristics such as size and shape and a surface roughness of the disc was examined for feedstock of 4 different powders with a same binder. As results, the effect of the slip phenomenon could be sufficiently minimized on the roughened surface in most cases. However, the effect of the slip phenomenon could not be sufficiently minimized for feedstock of a round-particular-shape powder and in the case of very narrow gap size.

• Proceedings of the KIPE Conference
• /
• 2014.07a
• /
• pp.110-111
• /
• 2014

2상 유도전동기(2PIM ; 2-Phase Induction Motor)의 벡터제어를 위해서는 전동기로 입력되는 상전류를 실시간으로 측정해야 한다. 본 논문에서는 가전제품과 같은 저전력 응용분야를 대상으로 고가의 홀전류센서 대신에 2개의 션트저항과 연산 증폭기를 사용하여 모든 운전영역에서 정밀하게 전류를 측정하는 방법을 제안한다. 2상 유도전동기용 인버터는 주로 저전력 응용분야를 대상으로 연구가 진행되고 있으므로 홀전류센서를 사용하여 전류를 측정하는 방법은 경제성 측면에서 부적합하다. 따라서, 본 논문에서는 인버터의 출력단에 홀전류센서 대신에 션트저항을 삽입하고, 양단전압을 차동증폭기로 증폭하여 전류를 측정한다. 실험을 통하여 제안된 방법의 유효성을 검증한다.